Modeling, scheduling, and control in advanced production systems

[1]  YuFeng Chen,et al.  On calculation of state space for linear system of simple sequential processes with resources , 2017 .

[2]  Yu Li,et al.  Study of manufacturing resource perception and process control of a radio-frequency-identification-enabled decentralized flexible manufacturing system , 2017 .

[3]  MengChu Zhou,et al.  Short-term scheduling of crude oil operations in refinery with high-fusion-point oil and two transportation pipelines , 2016, Enterp. Inf. Syst..

[4]  Abdulrahman Al-Ahmari,et al.  Deadlock recovery for flexible manufacturing systems modeled with Petri nets , 2017, Inf. Sci..

[5]  Duan Jianmin,et al.  Optimal lane change motion of intelligent vehicles based on extended adaptive pseudo-spectral method under uncertain vehicle mass , 2017 .

[6]  Tatsushi Nishi,et al.  Noncyclic scheduling of dual-armed cluster tools for minimization of wafer residency time and makespan , 2017 .

[7]  Jan Becker Høgsberg,et al.  Aalborg Universitet Characterization of clay-modified thermoset polymers under various environmental conditions for the use in high-voltage power pylons , 2017 .

[8]  Jiaxuan Wang,et al.  Development of a collaborative material management system for offshore platform projects using agent technology , 2017 .

[9]  MengChu Zhou,et al.  Optimal One-Wafer Cyclic Scheduling and Buffer Space Configuration for Single-Arm Multicluster Tools With Linear Topology , 2016, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[10]  Kamel Barkaoui,et al.  Compact Supervisory Control of Discrete Event Systems by Petri Nets With Data Inhibitor Arcs , 2017, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[11]  Mi Zhao.  An integrated control method for designing non-blocking supervisors using Petri nets , 2017 .

[12]  Xiaoliang Chen,et al.  A supervisory control strategy for the detection and restoration of power transmission failures during peak periods using Petri nets , 2017 .

[13]  Hui Sun,et al.  Research on energy-saving operation control model of the multi-type configuration centrifugal pump system with single invert , 2017 .

[14]  Edyta Kucharska,et al.  Algebraic-logical meta-model based approach for scheduling manufacturing problem with defects removal , 2017 .

[15]  Kamel Barkaoui,et al.  Deadlock analysis and control based on Petri nets: A siphon approach review , 2017 .

[16]  Yifan Zhang,et al.  Flight conflict resolution during low-altitude rescue operation based on ensemble conflict models , 2017 .

[17]  Jianting Zhou,et al.  Concrete plastic-damage factor for finite element analysis: Concept, simulation, and experiment , 2017 .

[18]  MengChu Zhou,et al.  Schedulability Analysis and Optimal Scheduling of Dual-Arm Cluster Tools With Residency Time Constraint and Activity Time Variation , 2012, IEEE Transactions on Automation Science and Engineering.

[19]  Hamid Davoudpour,et al.  A hybrid imperialist competitive algorithm for solving economic lot and delivery scheduling problem in a four-stage supply chain , 2017 .

[20]  Zude Zhou,et al.  Bearing preload optimization for machine tool spindle by the influencing multiple parameters on the bearing performance , 2017 .

[21]  Naiqi Wu,et al.  Petri net-based approach to short-term scheduling of crude oil operations with less tank requirement , 2017, Inf. Sci..

[22]  Shuping Yi,et al.  A multi-agent scheduling problem for two identical parallel machines to minimize total tardiness time and makespan , 2017 .

[23]  MengChu Zhou,et al.  Pareto-Optimization for Scheduling of Crude Oil Operations in Refinery via Genetic Algorithm , 2017, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[24]  Min Zhang,et al.  Multi-model quality prediction approach using fuzzy C-means clustering and support vector regression , 2017 .

[25]  Zhiwu Li,et al.  Energy efficiency optimization in scheduling crude oil operations of refinery based on linear programming , 2017 .

[26]  Liang Gao,et al.  Energy-efficient job shop scheduling problem with variable spindle speed using a novel multi-objective algorithm , 2017 .