A comprehensive review on equal channel angular pressing of bulk metal and sheet metal process methodology and its varied applications

[1]  M. Balasubramanian,et al.  Equal channel angular pressing of gas tungsten arc welded AA6061 alloy , 2020, Welding in the World.

[2]  C. Ni,et al.  Microstructure evolution of AZ91 alloy processed by a combination method of equal channel angular pressing and rolling , 2020 .

[3]  Edwin Eyram Klu,et al.  Developing a high-strength Al–11Si alloy with improved ductility by combining ECAP and cryorolling , 2020 .

[4]  G. Faraji,et al.  Development of a new integrated severe plastic deformation method , 2020 .

[5]  P. Snopiński,et al.  Microstructure, grain refinement and hardness of Al–3%Mg aluminium alloy processed by ECAP with helical die , 2019, Archives of Civil and Mechanical Engineering.

[6]  M. Balasubramanian,et al.  Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement, torsion and mechanical properties of aluminium , 2019, Materialwissenschaft und Werkstofftechnik.

[7]  P. Thomson,et al.  Development of a modified form of continuous equal channel angular processing (CECAP) of AA5xxx strain hardening Al-Mg alloys and a study of the resulting properties. Establishment of process parameters for in-line control , 2018 .

[8]  H. Jafarian,et al.  Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063 , 2018 .

[9]  A. Abdullah,et al.  Ultrasonic assisted hot metal powder compaction. , 2017, Ultrasonics sonochemistry.

[10]  G. Cao,et al.  Microstructure and mechanical properties of Mg-Nd-Zn-Zr alloy processed by integrated extrusion and equal channel angular pressing , 2017 .

[11]  H. Jafarian,et al.  Die Design Modification to Improve Workability during Equal Channel Angular Pressing , 2016 .

[12]  Xinping Zhang,et al.  Effects of extrusion parameters on tensile properties of magnesium alloy tubes fabricated via hydrostatic extrusion integrated with circular ECAP , 2016 .

[13]  Y. Ivanisenko,et al.  High Pressure Torsion Extrusion as a new severe plastic deformation process , 2016 .

[14]  Davoud M. Jafarlou,et al.  Severe plastic deformation of tubular AA 6061 via equal channel angular pressing , 2016 .

[15]  Mohsen A. Hassan,et al.  The application of equal channel angular pressing to join dissimilar metals, aluminium alloy and steel, using an Ag-Cu-Sn interlayer , 2015 .

[16]  M. Lewandowska,et al.  Grain refinement in technically pure aluminium plates using incremental ECAP processing , 2015 .

[17]  Andrzej Rosochowski,et al.  Tailored Sheared Blanks Produced by Incremental ECAP , 2015 .

[18]  Hyoung-Seop Kim,et al.  Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel angular pressing and direct extrusion in one step through an integrated die , 2015 .

[19]  M. Meratian,et al.  Improvement of ECAP process by imposing ultrasonic vibrations , 2015 .

[20]  Ali Shokuhfar,et al.  Improving homogeneity of ultrafine-grained/nanostructured materials produced by ECAP using a bevel-edge punch , 2015, Journal of Materials Science.

[21]  T Donič,et al.  New unique ECAP system with ultrasound and backpressure , 2014 .

[22]  K. Sankaranarayanasamy,et al.  A Comparative Study of Commercially Pure Aluminum Processed by ECAP Using Conventional and New Die , 2014 .

[23]  Marion Merklein,et al.  A review on tailored blanks—Production, applications and evaluation , 2014 .

[24]  H. Ahmadian,et al.  Ultrasonic assisted-ECAP. , 2013, Ultrasonics.

[25]  H. Miyanaji,et al.  A Modification on ECAP Process by Incorporating Twist Channel , 2013, Journal of Materials Engineering and Performance.

[26]  O. Makinde,et al.  Equal channel angular pressing technique for the formation of ultra-fine grained structures , 2012 .

[27]  J. Valder,et al.  Forming of Tubular Commercial Purity Aluminum by ECAP , 2012 .

[28]  Fuguo Li,et al.  Review on modified and novel techniques of severe plastic deformation , 2012, Science China Technological Sciences.

[29]  Sebastian Fritsch,et al.  Cryogenic forming of AA7075 by Equal‐Channel Angular Pressing , 2012 .

[30]  D. T. McDonald,et al.  A modified Hall–Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing , 2012 .

[31]  Matthias Haase,et al.  Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP) , 2012 .

[32]  K. Balasubramanian,et al.  Recrystallisation and bonding behaviour of ultra fine grained copper and Cu–Cr–Zr alloy using ECAP , 2012 .

[33]  M. H. Paydar,et al.  Consolidation of commercial pure aluminum powder by torsional-equal channel angular pressing (T-ECAP) at room temperature , 2012 .

[34]  Huseyin Erol Akata.  Application of Separated Die Design to Production of Ecap Dies , 2012 .

[35]  A. Zangiabadi,et al.  Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP) , 2011 .

[36]  M. H. Paydar,et al.  A modification on ECAP process by incorporating torsional deformation , 2011 .

[37]  Wenli Zhang,et al.  Enhanced ductility in an Al–Mg2Si in situ composite processed by ECAP using a modified BC route , 2011 .

[38]  Yong Zhi Li,et al.  Equal Channel Angular Pressing and Torsion (ECAPT) for Densification and Strengthening Properties of Powder Sintered Materials , 2010 .

[39]  Wenli Zhang,et al.  Transformation matrix analysis on the shear characteristics in multi-pass ECAP processing and predictive design of new ECAP routes , 2010 .

[40]  K. Janghorban,et al.  Microstructural and mechanical properties of commercially pure aluminum subjected to Dual Equal Channel Lateral Extrusion , 2009 .

[41]  L. Toth,et al.  Non-equal channel angular pressing of aluminum alloy , 2009 .

[42]  W. Liang,et al.  A modified die for equal channel angular pressing , 2009 .

[43]  G. Requena,et al.  ECAP vs. direct extrusion—Techniques for consolidation of ultra-fine Al particles , 2009 .

[44]  M. H. Paydar,et al.  Equal channel angular pressing-forward extrusion (ECAP-FE) consolidation of Al particles , 2009 .

[45]  O. Bouaziz,et al.  Severe plastic deformation of metals by high-pressure tube twisting , 2009 .

[46]  P. Hodgson,et al.  T-shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties , 2008 .

[47]  Mohammad Hossein Paydar,et al.  Consolidation of Al particles through forward extrusion-equal channel angular pressing (FE-ECAP) , 2008 .

[48]  M. Richert,et al.  Double-Billet Incremental ECAP , 2008 .

[49]  A. Taheri,et al.  A new method for producing bimetallic rods , 2007 .

[50]  Ryouji Kondou,et al.  Grain Refinement and Strengthening of a Cylindrical Pure-Aluminum Specimen by Using Modified Equal-Channel Angular Pressing Technique , 2007 .

[51]  Bernd-Arno Behrens,et al.  Precision forging processes for high-duty automotive components , 2007 .

[52]  T. Langdon,et al.  The role of back pressure in the processing of pure aluminum by equal-channel angular pressing , 2007 .

[53]  Young-Hoon Chung,et al.  An analysis of accumulated deformation in the Equal Channel Angular Rolling (ECAR) process , 2006 .

[54]  B. Verlinden,et al.  Equal channel angular drawing of aluminium sheet , 2006 .

[55]  Guang Chen,et al.  Origin of inhomogenous behavior during equal channel angular pressing , 2006 .

[56]  S. Suwas,et al.  A new design for equal channel angular extrusion , 2006 .

[57]  P. Chaudhury,et al.  Scaling up of Equal Channel Angular Pressing (ECAP) for the Production of Forging Stock , 2006 .

[58]  Sean Li,et al.  Effect of acute tool-angles on equal channel angular extrusion/pressing , 2005 .

[59]  A. Bakker,et al.  The MAGNEXTRUSCO Project: Process and Alloy Development for Hydrostatic Extrusion of Magnesium , 2005 .

[60]  Y. Nishida,et al.  Characteristics of plastic deformation by rotary-die equal-channel angular pressing , 2005 .

[61]  R. Valiev,et al.  Continuous processing of ultrafine grained Al by ECAP–Conform , 2004 .

[62]  T. Sakai,et al.  Continuous grain refinement of aluminum strip by conshearing , 2004 .

[63]  T. Langdon,et al.  Equal-channel angular pressing using plate samples , 2003 .

[64]  J. Suh,et al.  Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing , 2002 .

[65]  A. Azushima,et al.  Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process , 2001 .

[66]  W. Kim,et al.  Effect of aging treatment on heavily deformed microstructure of a 6061 aluminum alloy after equal channel angular pressing , 2001 .

[67]  V. Stolyarov,et al.  Microstructure and properties of pure Ti processed by ECAP and cold extrusion , 2001 .

[68]  T. Langdon,et al.  Development of a multi-pass facility for equal-channel angular pressing to high total strains , 2000 .

[69]  V. Segal.  Materials processing by simple shear , 1995 .

[70]  W. Volk,et al.  Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP , 2020 .

[71]  A. Farzampour,et al.  Severe Plastic Deformation of Copper Pipes Using Integrated Extrusion-Equal Channel Angular Pressing (Ex-ECAP) , 2017, Transactions of the Indian Institute of Metals.

[72]  R. Kocich,et al.  Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP. , 2013, Micron.

[73]  Dmitry Orlov,et al.  Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing , 2011 .

[74]  L. Dobrzański,et al.  ECAP methods application on selected non-ferrous metals and alloys , 2010 .

[75]  T. Kumar,et al.  Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation , 2009 .

[76]  M. Richert,et al.  3D-ECAP of Square Aluminium Billets , 2007 .