A multiband multiple-input multiple-output (MIMO) antenna using polarization diversity for next generation mobile communication is proposed.The MIMO antenna consists of two dual-band (0.75 GHz/2.5 GHz) dipole antennas with a separation distance of 0.8 mm. One dipole is etched on the top of a two-layered dielectric substrate with a dimension of 80 × 80 mm2 and the other is printed on the bottom side of the same substrate. They are located orthogonal to one another. Even though the two stacked dipoles are separated by only 0.8 mm, the port-to-port isolation is maintained at greater than 20 dB, and the envelope correlation coefficient (ECC) of the two antennas is always lower than 0.2 over the entire frequency band. To evaluate the performance of the proposed antenna, key performance parameters such as the total efficiency, ECC, mean effective gain (MEG), MEG ratio, and actual diversity gain are analyzed. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26198
[1]
J. Romeu,et al.
Exact representation of antenna system diversity performance from input parameter description
,
2003
.
[2]
T. Taga,et al.
Analysis for mean effective gain of mobile antennas in land mobile radio environments
,
1990
.
[3]
Yaxing Cai,et al.
A novel wideband diversity antenna for mobile handsets
,
2009
.
[4]
G.F. Tsachtsiris,et al.
Integrating Compact Printed Antennas Onto Small Diversity/MIMO Terminals
,
2008,
IEEE Transactions on Antennas and Propagation.
[5]
Yuehe Ge,et al.
Compact diversity antenna for wireless devices
,
2005
.
[6]
Ki-Jin Kim,et al.
The high isolation dual‐band inverted F antenna diversity system with the small N‐section resonators on the ground plane
,
2007
.
[7]
Xiao Dong Chen,et al.
A compact four-element diversity-antenna array for pda terminals in a mimo system
,
2005
.