Design of a Medium Voltage Generator with DC-Cascade for High Power Wind Energy Conversion Systems

This paper shows a new concept to generate medium voltage (MV) in wind power application to avoid an additional transformer. Therefore, the generator must be redesigned with additional constraints and a new topology for the power rectifier system by using multiple low voltage (LV) power rectifiers connected in series and parallel to increase the DC output voltage. The combination of parallel and series connection of rectifiers is further introduced as DC-cascade. With the resulting DC-cascade, medium output voltage is achieved with low voltage rectifiers and without a bulky transformer. This approach to form a DC-cascade reduces the effort required to achieve medium DC voltage with a simple rectifier system. In this context, a suitable DC-cascade control was presented and verified with a laboratory test setup. A gearless synchronous generator, which is highly segmented so that each segment can be connected to its own power rectifier, is investigated. Due to the mixed AC and DC voltage given by the DC-cascade structure, it becomes more demanding to the design of the generator insulation, which influences the copper fill factor and the design of the cooling system. A design strategy for the overall generator design is carried out considering the new boundary conditions.

[1]  Samir Kouro,et al.  Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters , 2015, IEEE Transactions on Power Electronics.

[2]  Xu Cai,et al.  A Novel Multi-level Medium Voltage Converter Designed for Medium Voltage Wind Power Generation System , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.

[3]  L. Henriksen,et al.  The DTU 10-MW Reference Wind Turbine , 2013 .

[4]  Chris Heron,et al.  Medium-Voltage Motor Optimization: Two Ways to Choose Cost-Effective ac Machines , 2020, IEEE Industry Applications Magazine.

[5]  H. M. Schneider,et al.  Insulation of HVDC converter stations , 1999 .

[6]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[7]  Bin Wu,et al.  High-power wind energy conversion systems: State-of-the-art and emerging technologies , 2015, Proceedings of the IEEE.

[8]  M. Liserre,et al.  Power Electronics Converters for Wind Turbine Systems , 2012, IEEE Transactions on Industry Applications.

[9]  Chunhua Liu,et al.  Overview of advanced control strategies for electric machines , 2017 .

[10]  Jurgen Biela,et al.  Design and optimization of medium frequency, medium voltage transformers , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[11]  Rastko Fiser,et al.  Fast and Accurate Model of Interior Permanent-Magnet Machine for Dynamic Characterization , 2019, Energies.

[12]  Francesco Castelli-Dezza,et al.  Design and analysis of a Medium Voltage DC wind farm with a transformer-less wind turbine generator , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[13]  Li Ran,et al.  Fault-Tolerant Control for a Modular Generator–Converter Scheme for Direct-Drive Wind Turbines , 2011, IEEE Transactions on Industrial Electronics.

[14]  Steffen Jonas,et al.  Design of a Medium Voltage Generator and Power Converter for High Power Wind Energy Conversion Systems , 2020, 2020 55th International Universities Power Engineering Conference (UPEC).

[15]  Jiabing Hu,et al.  Electrical machines and power‐electronic systems for high‐power wind energy generation applications: Part II – power electronics and control systems , 2012 .

[16]  R. H. Park,et al.  Two-reaction theory of synchronous machines generalized method of analysis-part I , 1929, Transactions of the American Institute of Electrical Engineers.

[17]  Bin Wu,et al.  Powering the Future of Industry: High-Power Adjustable Speed Drive Topologies , 2012, IEEE Industry Applications Magazine.

[18]  G. J. Paoletti,et al.  Partial discharge theory and technologies related to medium-voltage electrical equipment , 2001 .

[19]  Subhashish Bhattacharya,et al.  Medium voltage power conversion architecture for high power PMSG based wind energy conversion system (WECS) , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[20]  Drazen Dujic,et al.  Power Electronic Traction Transformer—Medium Voltage Prototype , 2014, IEEE Transactions on Industrial Electronics.

[21]  Bernd Ponick,et al.  Electromagnetic design of a 10 MW permanent magnet synchronous generator for wind turbine application , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[22]  Stefan Faulstich,et al.  Powering the 21st century by wind energy—Options, facts, figures , 2019, Applied Physics Reviews.

[23]  Hirofumi Akagi,et al.  Multilevel Converters: Fundamental Circuits and Systems , 2017, Proceedings of the IEEE.

[24]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[25]  Marco Liserre,et al.  Grid Converters for Photovoltaic and Wind Power Systems , 2011 .

[26]  Mo Al-akayshee,et al.  A Reliable Medium-Voltage High-Power Conversion System for MWs Wind Turbines , 2020, IEEE Transactions on Sustainable Energy.

[27]  Bernd Ponick,et al.  Segmented permanent magnet ring generator with active damping of axial oscillations , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[28]  Ke Ma,et al.  Wind Energy Systems , 2017, Proceedings of the IEEE.

[29]  Yongdong Li,et al.  A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems , 2012, IEEE Transactions on Sustainable Energy.

[30]  M. A. Khan,et al.  Optimization of high voltage geared permanent-magnet synchronous generator systems , 2014, 2014 International Conference on Electrical Machines (ICEM).

[31]  Wei Jing,et al.  Application of active NPC converter on generator side for MW direct-driven wind turbine , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[32]  Baoming Ge,et al.  Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications , 2010, IEEE Transactions on Industrial Electronics.

[33]  J.C.G. Wheeler,et al.  Effects of converter pulses on the electrical insulation in low and medium voltage motors , 2005, IEEE Electrical Insulation Magazine.

[34]  Y. Liu,et al.  Comparisons of Concentrated and Distributed Winding PMSM in MV Power Generation , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[35]  A. Hernandez,et al.  Design of a Back-to-Back NPC Converter Interface for Wind Turbines With Squirrel-Cage Induction Generator , 2008, IEEE Transactions on Energy Conversion.

[36]  S.H. Jayaram,et al.  Insulation Problems in Medium-Voltage Stator Coils Under Fast Repetitive Voltage Pulses , 2007, IEEE Transactions on Industry Applications.

[37]  Matthias Wecker,et al.  Distributed control of a multi-pole permanent magnet synchronous generator for wind turbine application , 2016, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe).