Regulating Cathode‐Electrolyte Interphase by Confining Functional Aluminum Compound within Ni‐Rich Cathodes

[1]  Yu‐Guo Guo,et al.  Chemically converting residual lithium to a composite coating layer to enhance the rate capability and stability of single-crystalline Ni-rich cathodes , 2021, Nano Energy.

[2]  Huolin L. Xin,et al.  Chemomechanically Stable Ultrahigh-Ni Single-Crystalline Cathodes with Improved Oxygen Retention and Delayed Phase Degradations. , 2021, Nano letters.

[3]  Yunhui Huang,et al.  Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries , 2021 .

[4]  Yong Yang,et al.  Enhanced Interfacial Stability of a LiNi0.9Co0.05Mn0.05O2 Cathode by a Diboron Additive , 2021, ACS Applied Energy Materials.

[5]  K. Amine,et al.  Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries , 2021, Advanced Energy Materials.

[6]  Haiyan Wang,et al.  Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 as a Highly Stable Cathode for Lithium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[7]  J. Dahn,et al.  A Systematic Study of Electrolyte Additives in Single Crystal and Bimodal LiNi0.8Mn0.1 Co0.1O2/Graphite Pouch Cells , 2021 .

[8]  Heng Zhang,et al.  Sulfur‐containing compounds as electrolyte additives for lithium‐ion batteries , 2021, InfoMat.

[9]  Xu Zhang,et al.  Interphase Engineering by Electrolyte Additives for Lithium-Rich Layered Oxides: Advances and Perspectives , 2021, ACS Energy Letters.

[10]  Weihua Chen,et al.  Achieving long-cycling sodium-ion full cells in ether-based electrolyte with vinylene carbonate additive , 2021 .

[11]  Liquan Chen,et al.  Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes. , 2021, ACS applied materials & interfaces.

[12]  Yunhui Huang,et al.  Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification. , 2021, ACS applied materials & interfaces.

[13]  Jaephil Cho,et al.  Replacing conventional battery electrolyte additives with dioxolone derivatives for high-energy-density lithium-ion batteries , 2021, Nature Communications.

[14]  Ji‐Guang Zhang,et al.  Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode , 2020, Science.

[15]  D. Aurbach,et al.  Understanding the Role of Alumina (Al2O3), Pentalithium Aluminate (Li5AlO4), and Pentasodium Aluminate (Na5AlO4) Coatings on the Li and Mn‐Rich NCM Cathode Material 0.33Li2MnO3·0.67Li(Ni0.4Co0.2Mn0.4)O2 for Enhanced Electrochemical Performance , 2020, Advanced Functional Materials.

[16]  Zonghai Chen,et al.  Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange. , 2020, Journal of the American Chemical Society.

[17]  Qiang Sun,et al.  Engineering of polymeric disulfide nanosheet cathode for highly durable lithium-sulfur battery , 2020 .

[18]  B. Inkson,et al.  Visualization and Chemical Characterization of the Cathode Electrolyte Interphase Using He-Ion Microscopy and In Situ Time-of-Flight Secondary Ion Mass Spectrometry , 2020, ACS applied energy materials.

[19]  Christopher C. S. Chan,et al.  Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells , 2020, Nature Communications.

[20]  Shimou Chen,et al.  3-cyano-5-fluorobenzenzboronic acid as an electrolyte additive for enhancing the cycling stability of Li1.2Mn0.54Ni0.13Co0.13O2 cathode at high voltage , 2020 .

[21]  Qinghua Zhang,et al.  An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances , 2020, Advanced Energy Materials.

[22]  Jingwei Xiang,et al.  High sulfur-containing organosulfur polymer composite cathode embedded by monoclinic S for lithium sulfur batteries , 2020 .

[23]  A. Manthiram.  A reflection on lithium-ion battery cathode chemistry , 2020, Nature Communications.

[24]  L. Archer,et al.  Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode , 2020, Advanced materials.

[25]  Evan M. Erickson,et al.  High-nickel layered oxide cathodes for lithium-based automotive batteries , 2020 .

[26]  Xiqian Yu,et al.  Investigations on the fundamental process of cathode electrolyte interphase formation and evolution for high-voltage cathodes. , 2019, ACS applied materials & interfaces.

[27]  Xiulin Fan,et al.  Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries , 2019, Joule.

[28]  A. Manthiram,et al.  Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability , 2019, Nature Communications.

[29]  J. Dahn,et al.  Synthesis of Single Crystal LiNi0.88Co0.09Al0.03O2 with a Two-Step Lithiation Method , 2019, Journal of The Electrochemical Society.

[30]  J. Dahn,et al.  New Chemical Insights into the Beneficial Role of Al2O3 Cathode Coatings in Lithium-ion Cells. , 2019, ACS applied materials & interfaces.

[31]  Ning Qin,et al.  Polyvinylpyrrolidone-Induced Uniform Surface-Conductive Polymer Coating Endows Ni-Rich LiNi0.8Co0.1Mn0.1O2 with Enhanced Cyclability for Lithium-Ion Batteries. , 2019, ACS applied materials & interfaces.

[32]  X. Sun,et al.  Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries , 2019, Advanced Energy Materials.

[33]  Mingyuan Ge,et al.  Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries , 2019, Advanced Functional Materials.

[34]  Wangda Li,et al.  Extending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase , 2018, Advanced Energy Materials.

[35]  Alicia Koo,et al.  Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al 2 O 3 and LiAlO 2 coatings on LiNi 0.6 Co 0.2 Mn 0.2 O 2 , 2018 .

[36]  Ji‐Guang Zhang,et al.  Atomic Resolution Structural and Chemical Imaging Revealing the Sequential Migration of Ni, Co, and Mn upon the Battery Cycling of Layered Cathode. , 2017, Nano letters.

[37]  Wangda Li,et al.  Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries , 2017, Nature Communications.

[38]  Jianming Zheng,et al.  Electrolyte additive enabled fast charging and stable cycling lithium metal batteries , 2017, Nature Energy.

[39]  Kwangjin Park,et al.  Induced AlF3 segregation for the generation of reciprocal Al2O3 and LiF coating layer on self-generated LiMn2O4 surface of over-lithiated oxide based Li-ion battery , 2016 .

[40]  S. Ramesh,et al.  Conductivity and FTIR studies on PEO-LiX [X: CF3SO3(-), SO4(2-)] polymer electrolytes. , 2008, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[41]  Philip N. Ross,et al.  Thermal Stability of LiPF6 Salt and Li-ion Battery Electrolytes Containing LiPF6 , 2006 .

[42]  Prashanth Jampani Hanumantha,et al.  Sulfonic Acid Based Complex Framework Materials (CFM): Nanostructured Polysulfide Immobilization Systems for Rechargeable Lithium–Sulfur Battery , 2019, Journal of The Electrochemical Society.

[43]  Mengyun Nie,et al.  The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2 Electrodes , 2017 .

[44]  Hubert A. Gasteiger,et al.  Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries , 2017 .

[45]  Shizhao Xiong,et al.  Insights into Li-S Battery Cathode Capacity Fading Mechanisms: Irreversible Oxidation of Active Mass during Cycling , 2012 .

[46]  Highly Fluorinated Al-Centered Lithium Salt Boosting the Interfacial Compatibility of Li-Metal Batteries , 2022 .