Residual stresses in alumina–zirconia laminates

[1]  D. J. Green,et al.  Damage in Al2O3 sintering compacts under very low tensile stress , 1999 .

[2]  G. Messing,et al.  Mechanical characterization of Al2O3/ZrO2 hybrid laminates , 1998 .

[3]  H. M. Chan.  LAYERED CERAMICS: Processing and Mechanical Behavior , 1997 .

[4]  Zhigang Suo,et al.  Cracking of Laminates Subjected to Biaxial Tensile Stresses , 1996 .

[5]  M. Oechsner,et al.  Crack Bifurcation in Laminar Ceramic Composites , 1996 .

[6]  Xiaozhi Hu,et al.  Surface Properties of Ceramic Laminates Fabricated by Die Pressing , 1996 .

[7]  Raymond A. Cutler,et al.  Toughening of Layered Ceramic Composites with Residual Surface Compression , 1996 .

[8]  Z. Suo,et al.  Surface cracking in layers under biaxial, residual compressive stress , 1995 .

[9]  O. Prakash,et al.  Crack deflection in ceramic/ceramic laminates with strong interfaces , 1995 .

[10]  D. J. Green,et al.  Strength and Young's Modulus Behavior of a Partially Sintered Porous Alumina , 1995 .

[11]  K. Zeng,et al.  Residual stress and crack propagation in laminated composites , 1994 .

[12]  A. Evans,et al.  Mechanical Properties of Partially Dense Alumina Produced from Powder Compacts , 1994 .

[13]  T. Watkins,et al.  Fracture Behavior of CVD SiC‐Coated Graphite: II, Conditions for the Onset of Multiple Cracking , 1994 .

[14]  T. Watkins,et al.  Fracture Behavior of Chemically‐Vapor‐Deposited SiC‐Coated Graphite: I, Experimental Results , 1993 .

[15]  Z. Suo,et al.  Tunneling Cracks in Constrained Layers , 1993 .

[16]  J. J. Mecholsky,et al.  Toughening by metallic lamina in nickel/alumina composites , 1993 .

[17]  David B. Marshall,et al.  Enhanced Fracture Toughness in Layered Microcomposites of Ce‐ZrO2 and Al2O3 , 1991 .

[18]  G. Messing,et al.  Processing and Characterization of Laminated SiC Whisker Reinforced Al2O3 , 1991 .

[19]  Craig A. Rogers,et al.  Laminate Plate Theory for Spatially Distributed Induced Strain Actuators , 1991 .

[20]  K. Kendall,et al.  A simple way to make tough ceramics , 1990, Nature.

[21]  Rajendra K. Bordia,et al.  On constrained sintering—I. Constitutive model for a sintering body , 1988 .