Analyzing the Performance of Thermoelectric Generators with Inhomogeneous Legs: Coupled Material–Device Modelling for Mg2X-Based TEG Prototypes

Thermoelectric generators (TEGs) possess the ability to generate electrical power from heat. As TEGs are operated under a thermal gradient, inhomogeneous material properties—either by design or due to inhomogeneous material degradation under thermal load—are commonly found. However, this cannot be addressed using standard approaches for performance analysis of TEGs in which spatially homogeneous materials are assumed. Therefore, an innovative method of analysis, which can incorporate inhomogeneous material properties, is presented in this study. This is crucial to understand the measured performance parameters of TEGs and, from this, develop means to improve their longevity. The analysis combines experimental profiling of inhomogeneous material properties, modelling of the material properties using a single parabolic band model, and calculation of device properties using the established Constant Property Model. We compare modeling results assuming homogeneous and inhomogeneous properties to the measurement results of an Mg2(Si,Sn)-based TEG prototype. We find that relevant discrepancies lie in the effective temperature difference across the TE leg, which decreases by ~10%, and in the difference between measured and calculated heat flow, which increases from 2–15% to 9–16% when considering the inhomogeneous material. The approach confirms additional resistances in the TEG as the main performance loss mechanism and allows the accurate calculation of the impact of different improvements on the TEG’s performance.

[1]  P. Ponnusamy,et al.  Grading studies for efficient thermoelectric devices using combined 1D material and device modeling , 2022, Journal of Applied Physics.

[2]  J. de Boor,et al.  Developing a two-parabolic band model for thermoelectric transport modelling using Mg2Sn as an example , 2022, Journal of Physics: Energy.

[3]  P. Ziółkowski,et al.  Efficiency Measurement and Modeling of a High‐Performance Mg2(Si,Sn)‐Based Thermoelectric Generator , 2022, Advanced Engineering Materials.

[4]  E. Müller,et al.  Impact of the Dopant Species on the Thermomechanical Material Properties of Thermoelectric Mg2Si0.3Sn0.7 , 2022, Materials.

[5]  J. Bhadra,et al.  Corrosion Behavior of Thermoelectric P- and N-Type Bismuth Telluride Alloys Developed Through Microwave Sintering Process , 2022, SSRN Electronic Journal.

[6]  Md. Nazibul Hasan,et al.  Thermoelectric Generator: Materials and Applications in Wearable Health Monitoring Sensors and Internet of Things Devices , 2021, Advanced Materials Technologies.

[7]  B. Ryu,et al.  Overcoming Asymmetric Contact Resistances in Al-Contacted Mg2(Si,Sn) Thermoelectric Legs , 2021, Materials.

[8]  T. Dasgupta,et al.  Fabrication and testing of Mg2Si1-xSnx based thermoelectric generator module , 2021 .

[9]  B. Iversen Breaking thermoelectric performance limits , 2021, Nature Materials.

[10]  E. Mueller,et al.  On the role of Mg content in Mg2(Si,Sn): Assessing its impact on electronic transport and estimating the phase width by in situ characterization and modelling , 2021 .

[11]  J. Boor On the applicability of the single parabolic band model to advanced thermoelectric materials with complex band structures , 2021, Journal of Materiomics.

[12]  T. Dasgupta,et al.  Generic Approach for Contacting Thermoelectric Solid Solutions: Case Study in n- and p-Type Mg2Si0.3Sn0.7. , 2021, ACS applied materials & interfaces.

[13]  E. Alleno,et al.  High Power Density Thermoelectric Generators with Skutterudites , 2021, Advanced Energy Materials.

[14]  Z. Ren,et al.  Towards tellurium-free thermoelectric modules for power generation from low-grade heat , 2021, Nature Communications.

[15]  Eckhard Müller,et al.  Heat flow measurement as a key to standardization of thermoelectric generator module metrology: A comparison of reference and absolute techniques , 2021, Measurement.

[16]  P. Ponnusamy,et al.  Efficiency as a performance metric for material optimization in thermoelectric generators , 2021, Journal of Physics: Energy.

[17]  B. Ryu,et al.  On the relevance of point defects for the selection of contacting electrodes: Ag as an example for Mg2(Si,Sn)-based thermoelectric generators , 2021 .

[18]  Kewen Li,et al.  Thermoelectric power generator: Field test at Bottle Rock geothermal power plant , 2020 .

[19]  Z. Ren,et al.  N-type Mg3Sb2-Bi with improved thermal stability for thermoelectric power generation , 2020 .

[20]  G. J. Snyder,et al.  Na doping in PbTe - Solubility, Band Convergence, Phase Boundary Mapping, and Thermoelectric properties. , 2020, Journal of the American Chemical Society.

[21]  J. de Boor,et al.  Analyzing thermoelectric transport in n-type Mg2Si0.4Sn0.6 and correlation with microstructural effects: An insight on the role of Mg , 2020 .

[22]  Lidong Chen,et al.  Electrode interface optimization advances conversion efficiency and stability of thermoelectric devices , 2020, Nature Communications.

[23]  Xinbing Zhao,et al.  Half‐Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density , 2020, Advanced Energy Materials.

[24]  P. Ponnusamy,et al.  Using the constant properties model for accurate performance estimation of thermoelectric generator elements , 2020 .

[25]  Zhijian Jin,et al.  Analysis of Peak Electromagnetic Torque Characteristics for Superconducting DC Induction Heaters , 2020, IEEE Access.

[26]  T. Dasgupta,et al.  Critical Analysis of Single Band Modeling of Thermoelectric Materials , 2020 .

[27]  Mohammed Ismail,et al.  A comprehensive review of Thermoelectric Generators: Technologies and common applications , 2019, Energy Reports.

[28]  E. Müller,et al.  High efficiency Mg2(Si,Sn)-based thermoelectric materials: scale-up synthesis, functional homogeneity, and thermal stability , 2019, RSC advances.

[29]  J. Arbiol,et al.  Ge‐Doped ZnSb/β‐Zn4Sb3 Nanocomposites with High Thermoelectric Performance , 2019, Advanced Materials Interfaces.

[30]  P. Rogl,et al.  Study of thermal stability of CoSb3 skutterudite by Knudsen effusion mass spectrometry , 2019, Calphad.

[31]  Akanksha K. Menon,et al.  A Textile‐Integrated Polymer Thermoelectric Generator for Body Heat Harvesting , 2019, Advanced Materials Technologies.

[32]  E. Müller,et al.  Ni and Ag electrodes for magnesium silicide based thermoelectric generators , 2019, Materials Today Energy.

[33]  Trisha L. Andrew,et al.  A Wearable All‐Fabric Thermoelectric Generator , 2019, Advanced Materials Technologies.

[34]  Prashant Sahu,et al.  Analyzing transport properties of p-type Mg2Si–Mg2Sn solid solutions: optimization of thermoelectric performance and insight into the electronic band structure , 2019, Journal of Materials Chemistry A.

[35]  E. Mueller,et al.  Synthesis of p-type Mg2Si1-xSnx with x = 0-1 and optimization of the synthesis parameters , 2019, Materials Today: Proceedings.

[36]  M. Battabyal,et al.  Microstructure and doping effect on the enhancement of the thermoelectric properties of Ni doped Dy filled CoSb3 skutterudites , 2018 .

[37]  M. Kanatzidis,et al.  Excessively Doped PbTe with Ge-Induced Nanostructures Enables High-Efficiency Thermoelectric Modules , 2018, Joule.

[38]  Tomoaki Yamada,et al.  Control of Mg content and carrier concentration via post annealing under different Mg partial pressures for Sb-doped Mg2Si thermoelectric material , 2018 .

[39]  Nader Farahi,et al.  Mechanical Alloying of Optimized Mg2(Si,Sn) Solid Solutions: Understanding Phase Evolution and Tuning Synthesis Parameters for Thermoelectric Applications , 2018 .

[40]  R. C. Singh,et al.  Significant enhancement in thermoelectric performance of nanostructured higher manganese silicides synthesized employing a melt spinning technique. , 2018, Nanoscale.

[41]  Hongbo Zhao,et al.  Thermal investigation of nanostructured bulk thermoelectric materials with hierarchical structures: An effective medium approach , 2018 .

[42]  Vladan Stevanović,et al.  Computationally guided discovery of thermoelectric materials , 2017 .

[43]  Z. Ren,et al.  Recent progress in p-type thermoelectric magnesium silicide based solid solutions , 2017 .

[44]  Jie Zhu,et al.  A comprehensive review of thermoelectric technology: materials, applications, modelling and performance improvement , 2016 .

[45]  D. Ebling,et al.  Development of a System for Thermoelectric Heat Recovery from Stationary Industrial Processes , 2016, Journal of Electronic Materials.

[46]  Soonil Lee,et al.  Synthesis and Thermoelectric Properties of Ce1−zPrzFe4−xCoxSb12 Skutterudites , 2016, Journal of Electronic Materials.

[47]  K. Zabrocki,et al.  Iron Disilicide as High-Temperature Reference Material for Traceable Measurements of Seebeck Coefficient Between 300 K and 800 K , 2016, Journal of Electronic Materials.

[48]  A. P. Gonçalves,et al.  Effective medium theory based modeling of the thermoelectric properties of composites: comparison between predictions and experiments in the glass–crystal composite system Si10As15Te75–Bi0.4Sb1.6Te3 , 2015 .

[49]  Heng Wang,et al.  Measuring thermoelectric transport properties of materials , 2015 .

[50]  Minoru Taya,et al.  Design of segmented thermoelectric generator based on cost-effective and light-weight thermoelectric alloys , 2014 .

[51]  W. Liu,et al.  Advanced thermoelectrics governed by a single parabolic band: Mg2Si(0.3)Sn(0.7), a canonical example. , 2014, Physical chemistry chemical physics : PCCP.

[52]  Emmanuel Kakaras,et al.  Energetic and exergetic analysis of waste heat recovery systems in the cement industry , 2013 .

[53]  J. de Boor,et al.  Data analysis for Seebeck coefficient measurements. , 2013, The Review of scientific instruments.

[54]  F. Edler,et al.  High-Temperature Measurement of Seebeck Coefficient and Electrical Conductivity , 2013, Journal of Electronic Materials.

[55]  P. Ziółkowski,et al.  Probing thermopower on the microscale , 2013 .

[56]  Joshua Martin Apparatus for the high temperature measurement of the Seebeck coefficient in thermoelectric materials. , 2012, The Review of scientific instruments.

[57]  P. Ziolkowski,et al.  Estimation of Thermoelectric Generator Performance by Finite Element Modeling , 2010 .

[58]  I. Webman,et al.  Thermoelectric power in inhomogeneous materials , 1977 .

[59]  G. Vineyard,et al.  Semiconductor Thermoelements and Thermoelectric Cooling , 1957 .