Simultaneous pulsed current activated combustion synthesis and densification of NbSi2–SiC composite

[1]  L. Daemen,et al.  Hardness and fracture toughness of moissanite , 2005 .

[2]  I. Shon,et al.  One step synthesis of dense MoSi2–SiC composite by high-frequency induction heated combustion and its mechanical properties , 2005 .

[3]  J. Han,et al.  Low-temperature cyclic oxidation behavior of MoSi2/SiC nanocomposite coating formed on Mo substrate , 2004 .

[4]  W. Pan,et al.  Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS , 2004 .

[5]  F. L. Zhang,et al.  Nanostructured WC/Co composite powder prepared by high energy ball milling , 2003 .

[6]  Z. A. Munir,et al.  One-step synthesis of dense tungsten carbide-cobalt hard materials , 2002 .

[7]  Z. A. Munir,et al.  Dense WSi2 and WSi2–20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion , 2001 .

[8]  I. Shon,et al.  Simultaneous synthesis and densification of WSi2 and WSi2-20vol.%Nb composite by field-activated and pressure-assisted combustion , 2000 .

[9]  G. S. Upadhyaya,et al.  Synthesis and sintering of TiB2 and TiB2–TiC composite under high pressure , 2000 .

[10]  J. Eckert,et al.  In-situ explosive formation of NbSi2-based nanocomposites by mechanical alloying , 1999 .

[11]  Zuhair A. Munir,et al.  Simultaneous synthesis and densification of Ti5Si3 and Ti5Si3–20 vol% ZrO2 composites by field-activated and pressure-assisted combustion , 1999 .

[12]  N. Stoloff.  An overview of powder processing of silicides and their composites , 1999 .

[13]  Kazuo Yamazaki,et al.  Simultaneous Synthesis and Densification of MoSi2 by Field‐Activated Combustion , 1996 .

[14]  M. Hoffmann,et al.  Mechanical properties of hot-pressed SiC-TiB2/TiC composites synthesizedin situ , 1993 .

[15]  M. Hoffmann,et al.  Sintering of in‐Situ Synthesized Sic–TiB2 Composites with Improved Fracture Toughness , 1992 .

[16]  J. Petrovic,et al.  Hardness and Fracture Toughness of SiC‐Particle‐Reinforced MoSi2 Composites , 1991 .

[17]  L. Matini,et al.  Microindentation characterization of silicide coatings on niobium and titanium , 1988 .