Analysis of Thermal Stress in a Solid Oxide Fuel Cell Due to the Sulfur Poisoning Interface of the Electrolyte and Cathode

The interface of an electrolyte and cathode strongly determines the oxygen reduction reaction and cell stability, but it is susceptible to sulfur impurities like SO2 in air. In this study, a 3D sol...

[1]  S. Singhal,et al.  Thermal Stress Analysis of Solid Oxide Fuel Cell with Z-type and Serpentine-Type Channels Considering Pressure Drop , 2020 .

[2]  H. Iwai,et al.  Numerical Model of Sulfur Poisoning on LSCF Cathode and Its Application to a 2-D Single Cell Simulation , 2019, ECS Transactions.

[3]  James B. Robinson,et al.  Thermally Driven SOFC Degradation in 4D: Part II. Macroscale , 2018 .

[4]  M. Andersson,et al.  Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells , 2018 .

[5]  M. Andersson,et al.  Thermal stress analysis of sulfur deactivated solid oxide fuel cells , 2018 .

[6]  Minfang Han,et al.  A short review of cathode poisoning and corrosion in solid oxide fuel cell , 2017 .

[7]  Tohru Yamamoto,et al.  Degradation Analysis of SOFC Stack Performance: Investigation of Cathode Sulfur Poisoning Due to Contamination in Air , 2017 .

[8]  P. Jasiński,et al.  Nanocrystalline cathode functional layer for SOFC , 2017 .

[9]  Min Xu,et al.  Modeling of an anode supported Solid Oxide Fuel Cell focusing on Thermal Stresses , 2016 .

[10]  K. Sasaki,et al.  Atomic-resolution analysis of degradation phenomena in SOFCS: A case study of SO2 poisoning in LSM cathodes , 2016 .

[11]  Min Xu,et al.  Solid oxide fuel cell interconnect design optimization considering the thermal stresses , 2016, Science bulletin.

[12]  N. Haque,et al.  Energy Technology 2016: Carbon Dioxide Management and Other Technologies: TMS/Energy , 2016 .

[13]  H. Yokokawa.  Towards Comprehensive Description of Stack Durability/Reliability Behavior , 2015 .

[14]  C. Wang.  Microscale Correlations Adoption in Solid Oxide Fuel Cell , 2015 .

[15]  Cheng-Cheng Wang,et al.  Mechanism of SO2 Poisoning on the Electrochemical Activity of LSCF and LSM Electrodes , 2015 .

[16]  B. Sundén,et al.  Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics , 2014 .

[17]  S. Jiang,et al.  Chromium deposition and poisoning of cathodes of solid oxide fuel cells – A review , 2014 .

[18]  K. Yamaji,et al.  Evaluation of Sulfur Dioxide Poisoning for LSCF Cathodes , 2013 .

[19]  B. Sundén,et al.  SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants , 2013 .

[20]  Caroline Calderone,et al.  Combined Cr and S poisoning in solid oxide fuel cell cathodes , 2012 .

[21]  K. Yamaji,et al.  General considerations on degradation of Solid Oxide Fuel Cell anodes and cathodes due to impurities in gases , 2011 .

[22]  Norbert H. Menzler,et al.  Degradation of anode supported cell (ASC) performance by Cr-poisoning , 2011 .

[23]  M. Soroush,et al.  Mathematical modeling of solid oxide fuel cells: A review , 2011 .

[24]  P. Chinda,et al.  Microscale Modeling of an Anode‐Supported Planar Solid Oxide Fuel Cell , 2011 .

[25]  Kohei Ito,et al.  Influence of SO2 on the Long-Term Durability of SOFC Cathodes , 2011 .

[26]  Tingshuai Li,et al.  Hydrogen sulfide poisoning in solid oxide fuel cells under accelerated testing conditions , 2010 .

[27]  Toru Inagaki,et al.  Sulfur Poisoning of SOFC Cathodes , 2009 .

[28]  B. Sundén,et al.  CFD Approach to Analyze Transport Phenomena Coupled Chemical Reactions Relevant for Methane Reformers , 2009 .

[29]  Bengt Sundén,et al.  Analysis of parameter effects on chemical reaction coupled transport phenomena in SOFC anodes , 2009 .

[30]  Amornchai Arpornwichanop,et al.  Electrochemical study of a planar solid oxide fuel cell: Role of support structures , 2008 .

[31]  D. Leung,et al.  Parametric study of solid oxide fuel cell performance , 2007 .

[32]  Ji-won Son,et al.  Characterization of the electrode and electrolyte interfaces of LSGM-based SOFCs , 2006 .

[33]  Jin Hyun Nam,et al.  Microstructural Optimization of Anode-Supported Solid Oxide Fuel Cells by a Comprehensive Microscale Model , 2006 .

[34]  S. Cocchi,et al.  A global thermo-electrochemical model for SOFC systems design and engineering , 2003 .

[35]  M. Mori,et al.  Thermal‐Expansion Behaviors and Mechanisms for Ca‐ or Sr‐Doped Lanthanum Manganite Perovskites under Oxidizing Atmospheres , 2000 .

[36]  M. Andersson,et al.  Thermal stress analysis of solid oxide fuel cells with chromium poisoning cathodes , 2018 .

[37]  S. Jiang,et al.  Mechanism and Kinetics of SO2 Poisoning on the Electrochemical Activity of La0.8Sr0.2MnO3 Cathodes of Solid Oxide Fuel Cells , 2016 .

[38]  Andrea Lanzini,et al.  Sulfur poisoning in Ni-anode solid oxide fuel cells (SOFCs): Deactivation in single cells and a stack , 2016 .

[39]  Vinod M. Janardhanan,et al.  Modeling Sulfur Poisoning of Ni-Based Anodes in Solid Oxide Fuel Cells , 2014 .