Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing

Abstract Complex thermal behaviour during fabrication plays an import role in the geometrical formation and mechanical properties of Ti6Al4V components manufactured using Wire Arc Additive Manufacturing (WAAM) technology. In this study, through in-situ temperature measurement, the heat accumulation and thermal behaviour during the gas tungsten wire arc additive manufacturing (GT-WAAM) process are presented. The effects of heat accumulation on microstructure and mechanical properties of additively manufactured Ti6Al4V parts were studied by means of optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and standard tensile tests, aiming to explore the feasibility of fabricating Ti6Al4V parts by GT-WAAM using localized gas shielding. The results show that due to the influences of thermal accumulation, the layer’s surface oxidation, microstructural evolution, grain size, and crystalline phase vary along the building direction of the as-fabricated wall, which creates variations in mechanical properties and fracture features. It has also been found that it is necessary to maintain the process interpass temperature below 200 °C to ensure an acceptable quality of Ti6Al4V part fabricated using only localized gas shielding in an otherwise open atmosphere. This research provides a better understanding of the effects of heat accumulation on targeted deposition properties during the WAAM process, which will benefit future process control, improvement, and optimization.

[1]  P. Colegrove,et al.  Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V , 2013, Metallurgical and Materials Transactions A.

[2]  Q. Pei,et al.  Erratum to: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting , 2016 .

[3]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[4]  Zengxi Pan,et al.  Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing , 2016, Materials.

[5]  Hui Chen,et al.  Heat propagation of circular thin-walled parts fabricated in additive manufacturing using gas metal arc welding , 2018 .

[6]  S. L. Semiatin,et al.  Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V , 2003 .

[7]  Dominic Cuiuri,et al.  Adaptive path planning for wire-feed additive manufacturing using medial axis transformation , 2016 .

[8]  A. Addison,et al.  Wire + Arc Additive Manufacturing , 2016 .

[9]  S. S. Al-Bermani,et al.  The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V , 2010 .

[10]  F. Froes,et al.  Chapter 1 – The Additive Manufacturing of Titanium Alloys , 2016 .

[11]  Jian Han,et al.  Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V , 2017 .

[12]  Q. Pei,et al.  Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting , 2016 .

[13]  Bintao Wu,et al.  The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution , 2018, Corrosion Science.

[14]  Paul A. Colegrove,et al.  The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V , 2016 .

[15]  Jafar Razmi,et al.  Temperature distribution and melt geometry in laser and electron-beam melting processes – A comparison among common materials , 2015 .

[16]  H. J. Rack,et al.  Phase transformations during cooling in α+β titanium alloys , 1998 .

[17]  Zengxi Pan,et al.  Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing , 2016 .

[18]  Ma Qian,et al.  Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition , 2015 .

[19]  D. Gu,et al.  Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study , 2014 .

[20]  Francis H. Froes,et al.  Additive Manufacturing of Titanium Alloys , 2014, Additive Manufacturing Processes.

[21]  Christoph Leyens,et al.  Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM) , 2012 .

[22]  Bintao Wu,et al.  The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy , 2018, Journal of Materials Processing Technology.

[23]  G. Lütjering.  Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys , 1998 .

[24]  Zengxi Pan,et al.  The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process , 2016 .

[25]  Zengxi Pan,et al.  Wire-feed additive manufacturing of metal components: technologies, developments and future interests , 2015 .

[26]  Marta-Lena Antti,et al.  Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V , 2016 .

[27]  Sung Ho Lee,et al.  Microstructure and intermediate-temperature mechanical properties of powder metallurgy Ti–6Al–4V alloy prepared by the prealloyed approach , 2015 .