Development of One-part geopolymers based on industrial carbonate waste

[1]  M. M. Mohd Hasan,et al.  Potential of industrial By-Products based geopolymer for rigid concrete pavement application , 2022, Construction and Building Materials.

[2]  Shaymaa M. Nagi,et al.  Hydration behavior and formation of strätlingite compound (C2ASH8) in a bio-cement based on tri-calcium silicate and mono-calcium aluminate for dental applications: influence of curing medium , 2022, Bulletin of the National Research Centre.

[3]  R. Suryanita,et al.  The effect of silica fume admixture on the compressive strength of the cellular lightweight concrete , 2022, Results in Engineering.

[4]  N. Shariatmadari,et al.  Compressive Strength of Sandy Soils Stabilized with Alkali-Activated Volcanic Ash and Slag , 2021 .

[5]  J. Thamboo,et al.  Compressive strength and deformation characteristics of concrete block masonry made with different mortars, blocks and mortar beddings types , 2021 .

[6]  L. E. Tan,et al.  Recent advances in slag-based binder and chemical activators derived from industrial by-products – A review , 2020 .

[7]  Shaoxian Song,et al.  Eco-friendly geopolymer prepared from solid wastes: A critical review. , 2020, Chemosphere.

[8]  C. Gruber,et al.  Interaction between spent fuel components and carbonate rocks. , 2019, The Science of the total environment.

[9]  Yonghua Du,et al.  Local Ca-structure variation and microstructural characteristics on one-part activated slag system with various activators , 2019, Cement and Concrete Composites.

[10]  A. Peled,et al.  Dolomite-based quarry-dust as a substitute for fly-ash geopolymers and cement pastes , 2019, Journal of Cleaner Production.

[11]  P. G. Asteris,et al.  Compressive strength of natural hydraulic lime mortars using soft computing techniques , 2019, Procedia Structural Integrity.

[12]  K. Ohenoja,et al.  One-part geopolymer cement from slag and pretreated paper sludge , 2018, Journal of Cleaner Production.

[13]  M. Illikainen,et al.  One-part alkali-activated materials : a review , 2018 .

[14]  Shubham Bansal,et al.  Evaluation of modified bituminous concrete mix developed using rubber and plastic waste materials , 2017 .

[15]  W. Kriven,et al.  Fully reacted high strength geopolymer made with diatomite as a fumed silica alternative , 2017 .

[16]  Aldo R. Boccaccini,et al.  Fly ash-based geopolymers containing added silicate waste. A review , 2017 .

[17]  D. Hardjito,et al.  A review on the effect of fly ash characteristics and their variations on the synthesis of fly ash based geopolymer , 2017 .

[18]  Sébastien Lasvaux,et al.  Buildings environmental impacts' sensitivity related to LCA modelling choices of construction materials , 2017 .

[19]  Mizi Fan,et al.  Effect of manufacturing process on the mechanisms and mechanical properties of fly ash-based geopolymer in ambient curing temperature , 2017 .

[20]  Zheng Hong Wang,et al.  Effects of alkali on one-part alkali-activated cement synthesized by calcining bentonite with dolomite and Na2CO3 , 2017 .

[21]  Ailar Hajimohammadi,et al.  Characterisation of One-Part Geopolymer Binders Made from Fly Ash , 2016, Waste and Biomass Valorization.

[22]  Wenda Wu,et al.  Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement , 2017 .

[23]  Ankur Mehta,et al.  An overview of geopolymers derived from industrial by-products , 2016 .

[24]  Hans-Carsten Kühne,et al.  Synthesizing one-part geopolymers from rice husk ash , 2016 .

[25]  Hans-Carsten Kühne,et al.  The effect of heat treatment on the mechanical and structural properties of one-part geopolymer-zeolite composites , 2016 .

[26]  Hao Wang,et al.  Fly ash-based geopolymer: clean production, properties and applications , 2016 .

[27]  F. Glasser,et al.  Stability of strätlingite in the CASH system , 2016 .

[28]  Jay G. Sanjayan,et al.  Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate , 2015 .

[29]  Shishir H. Singh,et al.  Solubility of a new calcium silicate-based root-end filling material , 2015, Journal of conservative dentistry : JCD.

[30]  John L. Provis,et al.  Alkali activated materials : state-of-the-art report, RILEM TC 224-AAM , 2014 .

[31]  J. Provis.  Geopolymers and other alkali activated materials: why, how, and what? , 2014 .

[32]  Yubin Jun,et al.  Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag , 2013 .

[33]  Z. Wang,et al.  Influence of Curing on the Strength Development of Calcium-Containing Geopolymer Mortar , 2013, Materials.

[34]  Ángel Palomo,et al.  Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends , 2013 .

[35]  B. Samet,et al.  EFFECTS OF THE SECONDARY MINERALS ON THE POZZOLANIC ACTIVITY OF CALCINED CLAY: CASE OF QUARTZ , 2012 .

[36]  Mingkai Zhou,et al.  Magnesia modification of alkali-activated slag fly ash cement , 2011 .

[37]  Longtu Li,et al.  A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements , 2010 .

[38]  C. Meyer.  The greening of the concrete industry , 2009 .

[39]  C. Rodriguez-Navarro,et al.  Thermal decomposition of calcite: Mechanisms of formation and textural evolution of CaO nanocrystals , 2009 .

[40]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .