A Novel Nested Reconfigurable Approach for a Glass Façade Cleaning Robot

The facade cleaning of high rise buildings is one of the hazardous tasks that is performed by human operators. Even after a significant advancement in construction technologies, several newfangled skyscrapers are still using the manual method for cleaning the glass panels. This research is aimed at the development of a glass facade cleaning robot, capable of adapting to any kind of building architecture. A robotic system capable of cleaning vertical glass surfaces demands a transformable morphology. A self-reconfigurable robot is one of the potential solutions to realize high degrees of adaptability. Following the design principles we derived, we propose a nested reconfigurable design approach for glass facade cleaning and develope a system of robot modules that performs glass facade cleaning. Throughout this research article, we discuss the brief concept and scheme of nested reconfigurable design principle and the hardware-software challenges associated with it. This article also discusses the capability to maximize the flexibility and modularity of the robot by using intra- and inter-reconfigurations. The effectiveness of the designed system is verified by experimental means.

[1]  Metin Sitti,et al.  Series of Multilinked Caterpillar Track-type Climbing Robots , 2016, J. Field Robotics.

[2]  Mohamed A. Sheriff,et al.  Burj Dubai: an architectural technical design case study , 2007 .

[3]  Jianwei Zhang,et al.  Effective Nonlinear Control Algorithms for a Series of Pneumatic Climbing Robots , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[4]  Kunchan Seo,et al.  MultiTrack: A multi-linked track robot with suction adhesion for climbing and transition , 2015, Robotics Auton. Syst..

[5]  Norbert Elkmann,et al.  Innovative service robot systems for facade cleaning of difficult-to-access areas , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Norbert Elkmann,et al.  Kinematics, sensors and control of the fully automated façade-cleaning robot SIRIUSc for the Fraunhofer headquarters building, Munich , 2008, Ind. Robot.

[7]  Gao,et al.  Adsorption Performance of Sliding Wall-Climbing Robot , 2010 .

[8]  Jianwei Zhang,et al.  Requirements of glass cleaning and development of climbing robot systems , 2004, 2004 International Conference on Intelligent Mechatronics and Automation, 2004. Proceedings..

[9]  X. Zhaoa,et al.  Structural Design of Shanghai Tower for Wind Loads , 2011 .

[10]  T. Kim,et al.  Adaptive impedance control of a cleaning unit for a novel wall-climbing mobile robotic platform (ROPE RIDE) , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[11]  Koki Kikuchi,et al.  Development of a Small Legged Wall Climbing Robot with Passive Suction Cups , 2014 .

[12]  Norbert Elkmann,et al.  Cleaning Automation , 2009, Handbook of Automation.

[13]  Rajesh Elara Mohan,et al.  Reconfiguration in linkages by variable allocation of joint positions: a modular design approach , 2013 .

[14]  M. Murakami,et al.  Development of a semi self-contained wall climbing robot with scanning type suction cups , 1997, Proceedings of the 1997 IEEE/RSJ International Conference on Intelligent Robot and Systems. Innovative Robotics for Real-World Applications. IROS '97.

[15]  Norbert Elkmann,et al.  SIRIUSc — Facade Cleaning Robot for a High-Rise Building in Munich, Germany , 2005 .

[16]  Jongwon Kim,et al.  Design and stability analysis of a novel wall-climbing robotic platform (ROPE RIDE) , 2013 .

[17]  William F. Baker,et al.  Burj Dubai: engineering the world's tallest building , 2007 .

[18]  KimJongwon,et al.  Series of Multilinked Caterpillar Track-type Climbing Robots , 2016 .

[19]  JongWon Kim,et al.  Design and Control of a Cleaning Unit for a Novel Wall-Climbing Robot , 2014 .

[20]  Ricardo Sosa,et al.  Nested Reconfigurable Robots: Theory, Design, and Realization , 2015 .

[21]  James Aldred,et al.  Burj Khalifa – a new high for high-performance concrete , 2010 .

[22]  Michael A. Osborne,et al.  The future of employment: How susceptible are jobs to computerisation? , 2017 .

[23]  Tomoaki Yano,et al.  Development of a self-contained wall climbing robot with scanning type suction cups , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[24]  Jianwei Zhang,et al.  Sky Cleaner 3: a real pneumatic climbing robot for glass-wall cleaning , 2006, IEEE Robotics & Automation Magazine.

[25]  Nicolás Rojas,et al.  Hinged-Tetro: A self-reconfigurable module for nested reconfiguration , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[26]  T. Bohme,et al.  Service robots for facade cleaning , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[27]  Hidenori Ishihara,et al.  Mechanisms and basic properties of window cleaning robot , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[28]  Xu Dianguo,et al.  Development & Application of Wall-Climbing Robots , 1999, ICRA.