A new estimator for vector velocity estimation [medical ultrasonics]

A new estimator for determining the two-dimensional velocity vector using a pulsed ultrasound field is derived. The estimator uses a transversely modulated ultrasound field for probing the moving medium under investigation. A modified autocorrelation approach is used in the velocity estimation. The new estimator automatically compensates for the axial velocity when determining the transverse velocity. The estimation is optimized by using a lag different from one in the estimation process, and noise artifacts are reduced by averaging RF samples. Further, compensation for the axial velocity can be introduced, and the velocity estimation is done at a fixed depth in tissue to reduce the influence of a spatial velocity spread. Examples for different velocity vectors and field conditions are shown using both simple and more complex field simulations. A relative accuracy of 10.1% is obtained for the transverse velocity estimates for a parabolic velocity profile for flow transverse to the ultrasound beam and a SNR of 20 dB using 20 pulse-echo lines. The overall bias in the estimates was -4.3%.

[1]  Performance of a vector velocity estimator [in ultrasound blood flow measurement] , 1998, 1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102).

[2]  V. Newhouse,et al.  Ultrasound Doppler Probing of Flows Transverse with Respect to Beam Axis , 1987, IEEE Transactions on Biomedical Engineering.

[3]  M. E. Anderson,et al.  Spatial quadrature: a novel technique for multi-dimensional velocity estimation , 1997, 1997 IEEE Ultrasonics Symposium Proceedings. An International Symposium (Cat. No.97CH36118).

[4]  J. Jensen,et al.  A new method for estimation of velocity vectors , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  M. Fox.  Multiple crossed-beam ultrasound Doppler velocimetry , 1978 .

[6]  G. Trahey,et al.  Angle Independent Ultrasonic Detection of Blood Flow , 1987, IEEE Transactions on Biomedical Engineering.

[7]  M.E. Aderson,et al.  Multi-dimensional velocity estimation with ultrasound using spatial quadrature , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[9]  J. Jensen,et al.  Calculation of pressure fields from arbitrarily shaped, apodized, and excited ultrasound transducers , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  K W Beach,et al.  Should results of ultrasound Doppler studies be reported in units of frequency or velocity? , 1989, Ultrasound in medicine & biology.

[11]  J. Jensen.  Estimation of Blood Velocities Using Ultrasound: A Signal Processing Approach , 1996 .

[12]  C. Kasai,et al.  Real-Time Two-Dimensional Blood Flow Imaging Using an Autocorrelation Technique , 1985, IEEE Transactions on Sonics and Ultrasonics.

[13]  O. Bonnefous.  Measurement of the complete (3D) velocity vector of blood flows , 1988, IEEE 1988 Ultrasonics Symposium Proceedings..

[14]  J.T. Powers,et al.  An axial velocity estimator for ultrasound blood flow imaging, based on a full evaluation of the Doppler equation by means of a two-dimensional autocorrelation approach , 1995, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  J. Arendt.  Paper presented at the 10th Nordic-Baltic Conference on Biomedical Imaging: Field: A Program for Simulating Ultrasound Systems , 1996 .