High-speed hydrogen pellet acceleration using an electromagnetic railgun system

Abstract Using a low electric energy railgun system, solid hydrogen pellet acceleration tests have been conducted to investigate the application of the electromagnetic railgun system for high-speed pellet injection into fusion plasmas. Pneumatically pre-accelerated hydrogen pellets measuring 3 mm in diameter and 4–9 mm in length were successfully accelerated by a railgun system that uses a laser-induced plasma armature formation. A 2 m long single railgun with ceramic insulators accelerated the hydrogen pellet to 2.6 km s−1 with a supplied energy of 1.7 kJ. The average acceleration rate and the energy conversion coefficient were improved to about 1.6×106m s−2 and 0.37%, which is 1.6 times and three times as large as that using a railgun with plastic insulators, respectively. Furthermore, using the 1 m long augment railgun with ceramic insulators, the energy conversion coefficient was improved to about 0.55% while the acceleration rate was increased to 2.4×106 m s−2. The highest hydrogen pellet velocity attained was about 2.3 km s−1 for the augment railgun under an energy supply of 1.1 kJ. Based on the findings, it is expected that the acceleration efficiency and the pellet velocity can be further improved by using a longer augment railgun with ceramic insulators and by applying an optimal power supply.

[1]  K. Kim,et al.  Hydrogen pellet acceleration with a two‐stage system consisting of a gas gun and a fuseless electromagnetic railgun , 1986 .

[2]  C. Bishop,et al.  Proceedings of the 17th Symposium on Fusion Technology , 1992 .

[3]  K. Azuma,et al.  Development of Railgun Pellet Injector Using a Laser-Induced Plasma Armature: Results of Dummy Pellet Acceleration Tests , 1995 .

[4]  A. Reggiori,et al.  DEVELOPMENT OF A TWO-STAGE INJECTOR FOR SOLID H 2 PELLETS , 1986 .

[5]  K. Sato,et al.  Railgun using plasma initiation separated from the projectile , 1993 .

[6]  K. Kim,et al.  Application of railgun principle to high-velocity hydrogen pellet injection for magnetic fusion reactor refueling , 1984 .

[7]  S. L. Milora,et al.  Review of hydrogen pellet injection technology for plasma fueling applications , 1989 .

[8]  S. Kasai,et al.  DEVELOPMENT OF RAILGUN SYSTEM FOR HIGH-SPEED PELLET INJECTION , 1993 .

[9]  K. Kim,et al.  Development of a fuseless small-bore railgun for injection of high-speed hydrogen pellets into magnetically confined plasmas , 1993 .

[10]  R. Hawke.  Fusion fuel pellet injection with a railgun , 1983 .

[11]  K. Kim,et al.  Investigation of the behavior of a plasma‐arc armature inside a two‐stage railgun and methods for preventing arcing , 1989 .

[12]  P. Kupschus,et al.  Upgrading the JET pellet injector with a two-stage light gas gun prototype and future planning , 1989, IEEE Thirteenth Symposium on Fusion Engineering.

[13]  S. Kasai,et al.  Development of railgun pellet injector using a laser-induced plasma armature , 1993, 15th IEEE/NPSS Symposium. Fusion Engineering.

[14]  S. Kasai,et al.  Railgun pellet injection system for fusion experimental devices , 1995 .

[15]  P. Kupschus,et al.  PROTOTYPE OF A HIGH SPEED PELLET LAUNCHER FOR JET , 1989 .

[17]  P. Souers,et al.  Hydrogen Properties for Fusion Energy , 1986 .

[18]  S. K. Combs,et al.  Pellet injection technology , 1993 .

[19]  P. W. Fisher.  Tritium proof-of-principle pellet injector , 1991 .

[20]  S. Kasai,et al.  Railgun pellet injection system using a laser-induced plasma armature , 1996 .

[21]  K. Shimizu,et al.  Laser-prearc railgun: Development for the application to a fuel pellet injector of a nuclear fusion reactor , 1992 .

[22]  S. L. Milora,et al.  Rview of pellet fueling , 1981 .