Nanothermal Interface Materials: Technology Review and Recent Results

Thermal interface materials (TIMs) play a critical role in conventionally packaged electronic systems and often represent the highest thermal resistance and/or least reliable element in the heat flow path from the chip to the external ambient. In defense applications, the need to accommodate large differences in the coefficients of thermal expansion (CTE) among the packaging materials, provide for in-field reworkability, and assure physical integrity as well as long-term reliability further exacerbates this situation. Epoxy-based thermoplastic TIMs are compliant and reworkable at low temperature, but their low thermal conductivities pose a significant barrier to the thermal packaging of high-power devices. Alternatively, while solder TIMs offer low thermal interface resistances, their mechanical stiffness and high melting points make them inappropriate for many of these applications. Consequently, Defense Advanced Research Projects Agency (DARPA) initiated a series of studies exploring the potential of nanomaterials and nanostructures to create TIMs with solderlike thermal resistance and thermoplasticlike compliance and reworkability. This paper describes the nano-TIM approaches taken and results obtained by four teams responding to the DARPA challenge of pursuing the development of low thermal resistance of 1 mm2 K/W and high compliance and reliability TIMs. These approaches include the use of metal nanosprings (GE), laminated solder and flexible graphite films (Teledyne), multiwalled carbon nanotubes (CNTs) with layered metallic bonding materials (Raytheon), and open-ended CNTs (Georgia Tech (GT)). Following a detailed description of the specific nano-TIM approaches taken and of the metrology developed and used to measure the very low thermal resistivities, the thermal performance achieved by these nano-TIMs, with constant thermal load, as well as under temperature cycling and in extended life testing (aging), will be presented. It has been found that the nano-TIMs developed by all four teams can provide thermal interface resistivities well below 10 mm2 K/W and that GE's copper nanospring TIMs can consistently achieve thermal interface resistances in the range of 1 mm2 K/W. This paper also introduces efforts undertaken for next generation TIMs to reach thermal interface resistance of just 0.1 mm2 K/W.

[1]  Thomas L. Bougher,et al.  Postgrowth Microwave Treatment to Align Carbon Nanotubes , 2013 .

[2]  Gang Chen,et al.  Effects of surface chemistry on thermal conductance at aluminum–diamond interfaces , 2010 .

[3]  Mechanism of thermal conductivity reduction in few-layer graphene , 2011, 1104.4964.

[4]  J. Murthy,et al.  An atomistic study of thermal conductance across a metal-graphene nanoribbon interface , 2011 .

[5]  J. Qu,et al.  Kapitza conductance of symmetric tilt grain boundaries in graphene , 2012 .

[6]  Julia R. Greer,et al.  Buckling-driven delamination of carbon nanotube forests , 2013 .

[7]  Gang Chen,et al.  Surface phonon polaritons mediated energy transfer between nanoscale gaps. , 2009, Nano letters.

[8]  Water Vapor Treatment for Decreasing the Adhesion between Vertically Aligned Carbon Nanotubes and the Growth Substrate , 2013 .

[9]  J. Murthy,et al.  Simulation of phonon transmission through graphene and graphene nanoribbons with a Green’s function method , 2010 .

[10]  J. Murthy,et al.  Spectral phonon conduction and dominant scattering pathways in graphene , 2011 .

[11]  J. Murthy,et al.  Simulation of thermal conductance across dimensionally mismatched graphene interfaces , 2010 .

[12]  F. Gao,et al.  Interfacial thermal resistance between metallic carbon nanotube and Cu substrate , 2011 .

[13]  Gang Chen,et al.  Polyethylene nanofibres with very high thermal conductivities. , 2010, Nature nanotechnology.

[14]  Sreekant Narumanchi,et al.  Thermal performance and reliability characterization of bonded interface materials (BIMs) , 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

[15]  Jun Xu,et al.  Enhancement of thermal interface materials with carbon nanotube arrays , 2006 .

[16]  Young Hee Lee,et al.  Crystalline Ropes of Metallic Carbon Nanotubes , 1996, Science.

[17]  A. Majumdar,et al.  Dense Vertically Aligned Multiwalled Carbon Nanotube Arrays as Thermal Interface Materials , 2007, IEEE Transactions on Components and Packaging Technologies.

[18]  Samuel Graham,et al.  Characterization of Metallically Bonded Carbon Nanotube-Based Thermal Interface Materials Using a High Accuracy 1D Steady-State Technique , 2012 .

[19]  S. Sitaraman,et al.  The experimental measurement of effective compressive modulus of carbon nanotube forests and the nature of deformation , 2013 .

[20]  Gang Chen,et al.  Thermal conductance of bimaterial microcantilevers , 2008 .

[21]  Xianfan Xu,et al.  Heat Transfer Across Metal-Dielectric Interfaces During Ultrafast-Laser Heating , 2012 .

[22]  Jianmin Qu,et al.  Size dependent thermal conductivity of single-walled carbon nanotubes , 2012 .

[23]  R. Prasher Thermal boundary resistance and thermal conductivity of multiwalled carbon nanotubes , 2008 .

[24]  Darin J. Sharar,et al.  Two-Phase Thermal Ground Planes: Technology Development and Parametric Results , 2015 .

[25]  Yagang Yao,et al.  Quality Control of Vertically Aligned Carbon Nanotubes Grown by Chemical Vapor Deposition , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[26]  S. Sitaraman,et al.  Waviness reduces effective modulus of carbon nanotube forests by several orders of magnitude , 2014 .

[27]  EXPERIMENTAL STUDY OF COEFFICIENT OF THERMAL EXPANSION OF ALIGNED GRAPHITE THERMAL INTERFACE MATERIALS , 2013 .

[28]  Avram Bar-Cohen,et al.  Advanced thermal management technologies for defense electronics , 2012, Defense, Security, and Sensing.