A seesaw-type approach for enhancing nonlinear energy harvesting

Harvesting sustainable mechanical energy is the ultimate objective of nonlinear energy harvesters. However, overcoming potential barriers, especially without the use of extra excitations, poses a great challenge for the development of nonlinear generators. In contrast to the existing methods, which typically modify the barrier height or utilize additional excitations, this letter proposes a seesaw-type approach to facilitate escape from potential wells by transfer of internal energy, even under low-intensity excitation. This approach is adopted in the design of a seesaw-type nonlinear piezoelectric energy harvester and the energy transfer process is analyzed by deriving expressions for the energy to reveal the working mechanism. Comparison experiments demonstrate that this approach improves energy harvesting in terms of an increase in the working frequency bandwidth by a factor of 60.14 and an increase in the maximum output voltage by a factor of 5.1. Moreover, the output power is increased by a factor of 51.3, which indicates that this approach significantly improves energy collection efficiency. This seesaw-type approach provides a welcome boost to the development of renewable energy collection methods by improving the efficiency of harvesting of low-intensity ambient mechanical energy.Harvesting sustainable mechanical energy is the ultimate objective of nonlinear energy harvesters. However, overcoming potential barriers, especially without the use of extra excitations, poses a great challenge for the development of nonlinear generators. In contrast to the existing methods, which typically modify the barrier height or utilize additional excitations, this letter proposes a seesaw-type approach to facilitate escape from potential wells by transfer of internal energy, even under low-intensity excitation. This approach is adopted in the design of a seesaw-type nonlinear piezoelectric energy harvester and the energy transfer process is analyzed by deriving expressions for the energy to reveal the working mechanism. Comparison experiments demonstrate that this approach improves energy harvesting in terms of an increase in the working frequency bandwidth by a factor of 60.14 and an increase in the maximum output voltage by a factor of 5.1. Moreover, the output power is increased by a factor of...

[1]  Michael Wang,et al.  Flexible and stretchable power sources for wearable electronics , 2017, Science Advances.

[2]  Pilkee Kim,et al.  A multi-stable energy harvester: Dynamic modeling and bifurcation analysis , 2014 .

[3]  Joan Daniel Prades,et al.  A review on efficient self-heating in nanowire sensors: Prospects for very-low power devices , 2018 .

[4]  Weiqing Yang,et al.  Harvesting energy from the natural vibration of human walking. , 2013, ACS nano.

[5]  Gursel Alici,et al.  A review on performance enhancement techniques for ambient vibration energy harvesters , 2017 .

[6]  B. Mann,et al.  Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator , 2010 .

[7]  Zhong Lin Wang,et al.  A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics , 2015, Nature Communications.

[8]  Zhong Lin Wang,et al.  Flutter-driven triboelectrification for harvesting wind energy , 2014, Nature Communications.

[9]  Won Keun Kim,et al.  An effective energy harvesting method from a natural water motion active transducer , 2014 .

[10]  Jun Li,et al.  Broadband and three-dimensional vibration energy harvesting by a non-linear magnetoelectric generator , 2016 .

[11]  Daniel J. Inman,et al.  Impact-induced high-energy orbits of nonlinear energy harvesters , 2015 .

[12]  Zhong Lin Wang,et al.  Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors , 2016, Science Advances.

[13]  Ryan L. Harne,et al.  A review of the recent research on vibration energy harvesting via bistable systems , 2013 .

[14]  Kangqi Fan,et al.  Scavenging energy from human walking through a shoe-mounted piezoelectric harvester , 2017 .

[15]  L. Gammaitoni,et al.  Nonlinear energy harvesting. , 2008, Physical review letters.

[16]  E. Pop,et al.  Bright visible light emission from graphene. , 2015, Nature nanotechnology.

[17]  Mengmeng Liu,et al.  Ultrastretchable, transparent triboelectric nanogenerator as electronic skin for biomechanical energy harvesting and tactile sensing , 2017, Science Advances.

[18]  Tianwei Ma,et al.  Enhancing mechanical energy harvesting with dynamics escaped from potential well , 2012 .

[19]  Wei Wang,et al.  Influence of potential well depth on nonlinear tristable energy harvesting , 2015 .

[20]  Mohammed F. Daqaq,et al.  A broadband bi-stable flow energy harvester based on the wake-galloping phenomenon , 2016 .

[21]  Zhong Lin Wang,et al.  Networks of triboelectric nanogenerators for harvesting water wave energy: a potential approach toward blue energy. , 2015, ACS nano.

[22]  Sheng-Bo Fan,et al.  An elastic-support model for enhanced bistable piezoelectric energy harvesting from random vibrations , 2015 .

[23]  Alper Erturk,et al.  Enhanced broadband piezoelectric energy harvesting using rotatable magnets , 2013 .

[24]  Rencheng Zheng,et al.  On square-wave-driven stochastic resonance for energy harvesting in a bistable system , 2014 .

[25]  Jie Wang,et al.  Sustainably powering wearable electronics solely by biomechanical energy , 2016, Nature Communications.

[26]  Na Li,et al.  Harvesting electrical energy from carbon nanotube yarn twist , 2017, Science.

[27]  Jiahai Yuan,et al.  Wind energy in China: Estimating the potential , 2016, Nature Energy.

[28]  Elisa De Ranieri,et al.  Marine energy: In deep water , 2016, Nature Energy.

[29]  Christopher R. Bowen,et al.  Piezoelectric and ferroelectric materials and structures for energy harvesting applications , 2014 .