Recent Developments in Thermally Insulating Materials Based on Geopolymers—a Review Article

[1]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[2]  Prinya Chindaprasirt,et al.  Use of crushed clay brick and pumice aggregates in lightweight geopolymer concrete , 2018, Construction and Building Materials.

[3]  Paolo Colombo,et al.  Processing, properties and applications of highly porous geopolymers: A review , 2018, Ceramics International.

[4]  X. Cui,et al.  Preparation of paraffin-based phase-change microcapsules and application in geopolymer coating , 2018, Journal of Coatings Technology and Research.

[5]  João A. Labrincha,et al.  Influence of water and aluminium powder content on the properties of waste-containing geopolymer foams , 2018 .

[6]  R. Cioffi,et al.  Mechanical and thermal properties of lightweight geopolymer composites , 2018 .

[7]  Xudong Cheng,et al.  Facile construction of the aerogel/geopolymer composite with ultra-low thermal conductivity and high mechanical performance , 2018, RSC advances.

[8]  M. Cyr,et al.  Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete , 2017 .

[9]  Muhammad Naveed,et al.  Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations , 2017 .

[10]  V. Medri,et al.  Production and thermomechanical characterization of wool–geopolymer composites , 2017 .

[11]  Paolo Colombo,et al.  High-porosity geopolymer foams with tailored porosity for thermal insulation and wastewater treatment , 2017 .

[12]  Tuan Ngo,et al.  Regulating the chemical foaming reaction to control the porosity of geopolymer foams , 2017 .

[13]  Zhen Li,et al.  Novel thermal insulating and lightweight composites from metakaolin geopolymer and polystyrene particles , 2017 .

[14]  R. M. Gutiérrez,et al.  A Novel MK-based Geopolymer Composite Activated with Rice Husk Ash and KOH: Performance at High Temperature , 2017 .

[15]  P. Colombo,et al.  High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant , 2017 .

[16]  Subaer,et al.  On The Physico-Mechanics , Thermal and Microstructure Properties of Hybrid Composite Epoxy-Geopolymer for Geothermal Pipe Application , 2017 .

[17]  Chunjie Yan,et al.  A facile method for preparation of floatable and permeable fly ash-based geopolymer block , 2016 .

[18]  X. Cui,et al.  Recent developments on inorganic polymers synthesis and applications , 2016 .

[19]  Angelo Vaccari,et al.  Porosity and insulating properties of silica-fume based foams , 2016 .

[20]  J. Labrincha,et al.  Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers , 2016 .

[21]  Liang Chen,et al.  Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer , 2016, Materials.

[22]  P. Palmero,et al.  Environmentally-Friendly Dense and Porous Geopolymers Using Fly Ash and Rice Husk Ash as Raw Materials , 2016, Materials.

[23]  P. Chindaprasirt,et al.  Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates , 2016 .

[24]  J. Labrincha,et al.  Porous biomass fly ash-based geopolymers with tailored thermal conductivity , 2016 .

[25]  Hjh Jos Brouwers,et al.  Design and performance evaluation of ultra-lightweight geopolymer concrete , 2016 .

[26]  K. Korniejenko,et al.  Thermal Insulation and Thermally Resistant Materials Made of Geopolymer Foams , 2016 .

[27]  J. Rämö,et al.  Metakaolin geopolymer characterization and application for ammonium removal from model solutions and landfill leachate , 2016 .

[28]  Dr. Shweta Saxena,et al.  STUDY OF CHEMICAL AND PHYSICAL PROPERTIES OF PERLITE AND ITS APPLICATION IN INDIA , 2016 .

[29]  Michele Rosano,et al.  A framework for a sustainable approach to mine tailings management: disposal strategies , 2015 .

[30]  Peiwen Li,et al.  Experimental study of geopolymer mortar with incorporated PCM , 2015 .

[31]  F. Pacheco-Torgal,et al.  Mix design, properties and cost analysis of fly ash-based geopolymer foam , 2015 .

[32]  A. Nazari,et al.  Physical and mechanical properties of lightweight aerated geopolymer , 2015 .

[33]  P. Chindaprasirt,et al.  Mechanical and Thermal Properties of Recycling Lightweight Pervious Concrete , 2015 .

[34]  A. Licciulli,et al.  Microwave synthesis of thermal insulating foams from coal derived bottom ash , 2015 .

[35]  Petr Hlaváček,et al.  Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties , 2015 .

[36]  L. Petrik,et al.  New synthesis method for the production of coal fly ash-based foamed geopolymers , 2015 .

[37]  Xudong Cheng,et al.  Development of porous fly ash-based geopolymer with low thermal conductivity , 2015 .

[38]  Ludger Fischer,et al.  Rigid polyurethane foams incorporated with phase change materials: A state-of-the-art review and future research pathways , 2015 .

[39]  X. Cui,et al.  Preparation and characterization of a reflective and heat insulative coating based on geopolymers , 2015 .

[40]  Saffa Riffat,et al.  Toward aerogel based thermal superinsulation in buildings: A comprehensive review , 2014 .

[41]  Paolo Colombo,et al.  Geopolymer foams by gelcasting , 2014 .

[42]  Hao Wang,et al.  Geopolymer foam concrete: An emerging material for sustainable construction , 2014 .

[43]  U. J. Alengaram,et al.  Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete , 2014 .

[44]  Antonio Licciulli,et al.  Synthesis and characteristics of fly ash and bottom ash based geopolymers–A comparative study , 2014 .

[45]  J. Deventer,et al.  Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash , 2014 .

[46]  Robert Černý,et al.  Hygric, thermal and durability properties of autoclaved aerated concrete , 2013 .

[47]  W. Gu,et al.  Characterization of a monoclonal antibody to Spiroplasma eriocheiris and identification of a motif expressed by the pathogen. , 2013, Veterinary microbiology.

[48]  L. Petrik,et al.  Synthesis and characterization of coal fly ash-based foamed geopolymer , 2013 .

[49]  B. Singh,et al.  Lightweight Geopolymer Concrete with EPS Beads , 2013 .

[50]  C. Natarajan,et al.  Strength, Economic and Sustainability Characteristics of Coal Ash -GGBS Based Geopolymer Concrete. , 2013 .

[51]  David S. Smith,et al.  Potassium geopolymer foams made with silica fume pore forming agent for thermal insulation , 2013, Journal of Porous Materials.

[52]  David S. Smith,et al.  Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements , 2012 .

[53]  Saeed Ahmari,et al.  Effects of activator type/concentration and curing temperature on alkali-activated binder based on copper mine tailings , 2012, Journal of Materials Science.

[54]  Lin Pan,et al.  Preparation, characterization and thermal properties of micro-encapsulated phase change materials , 2012 .

[55]  É. Guillaume,et al.  Aerosols emitted by the combustion of polymers containing nanoparticles , 2012, Journal of Nanoparticle Research.

[56]  H. Esmaily,et al.  Non-autoclaved high strength cellular concrete from alkali activated slag , 2012 .

[57]  E. Leonelli,et al.  Insulating behavior of metakaolin-based geopolymer materials assess with heat flux meter and laser flash techniques , 2012, Journal of Thermal Analysis and Calorimetry.

[58]  Changying Zhao,et al.  Thermal and rheological properties of microencapsulated phase change materials , 2011 .

[59]  Changying Zhao,et al.  Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications , 2011 .

[60]  Robert F. Boehm,et al.  Passive building energy savings: A review of building envelope components , 2011 .

[61]  Wei Han,et al.  Preparation and Properties of Alkali Stimulated Geopolymer and its Application in Thermal Insulation Coating , 2011 .

[62]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[63]  Dimitrios Panias,et al.  Thermal insulating foamy geopolymers from perlite , 2010 .

[64]  P. Michaud,et al.  Silica fume as porogent agent in geo-materials at low temperature , 2010 .

[65]  Hossein Omidian,et al.  Environmental, health and safety concerns of decorative mouldings made of expanded polystyrene in buildings , 2010 .

[66]  T. Tritt.  Thermal Conductivity: Theory, Properties, and Applications , 2010 .

[67]  C. Kaps,et al.  Geopolymeric binders with different fine fillers — Phase transformations at high temperatures , 2009 .

[68]  Behzad Majidi,et al.  Geopolymer technology, from fundamentals to advanced applications: a review , 2009 .

[69]  C. Xie,et al.  Preparation and properties of hollow glass microsphere-filled epoxy-matrix composites , 2009 .

[70]  S. Barg,et al.  Cellular ceramics by direct foaming of emulsified ceramic powder suspensions , 2008 .

[71]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[72]  Tayfun Uygunoğlu,et al.  Properties of autoclaved lightweight aggregate concrete , 2007 .

[73]  Kostas Komnitsas,et al.  Geopolymerisation: A review and prospects for the minerals industry , 2007 .

[74]  D. Bentz,et al.  Potential applications of phase change materials in concrete technology , 2007 .

[75]  M. Weil,et al.  The influence of calcium content on the structure and thermal performance of fly ash based geopolymers , 2007 .

[76]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[77]  Grant C. Lukey,et al.  Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C , 2007 .

[78]  J. Deventer,et al.  The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers , 2007 .

[79]  I. Giannopoulou,et al.  Structure, Design and Applications of Geopolymeric Materials , 2007 .

[80]  Grant C. Lukey,et al.  Thermal Conductivity of Metakaolin Geopolymers Used as a First Approximation for Determining Gel Interconnectivity , 2006 .

[81]  G. Cruciani.  Zeolites upon heating: Factors governing their thermal stability and structural changes , 2006 .

[82]  Iwan Sumirat,et al.  Theoretical consideration of the effect of porosity on thermal conductivity of porous materials , 2006 .

[83]  F. Li,et al.  Measurement of thermal conductivity of hollow glass-bead-filled polypropylene composites , 2006 .

[84]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[85]  Haihong Li,et al.  Synthesis and mechanical properties of metakaolinite-based geopolymer , 2005 .

[86]  J. Deventer,et al.  Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results , 2005 .

[87]  J. Provis,et al.  29Si NMR study of structural ordering in aluminosilicate geopolymer gels. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[88]  Mohammad S. Al-Homoud,et al.  Performance characteristics and practical applications of common building thermal insulation materials , 2005 .

[89]  Martin Schmücker,et al.  Microstructure of sodium polysialate siloxo geopolymer , 2005 .

[90]  Agis M. Papadopoulos,et al.  State of the art in thermal insulation materials and aims for future developments , 2005 .

[91]  Zongjin Li,et al.  Development of thermal energy storage concrete , 2004 .

[92]  A. G. Pasamehmetoglu,et al.  The Effects Of Gradation And Admixture On The Pumice Lightweight Aggregate Concrete , 2004 .

[93]  Á. Palomo,et al.  Characterisation of fly ashes. Potential reactivity as alkaline cements , 2003 .

[94]  Brian H. O'Connor,et al.  Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite , 2003 .

[95]  C. Shi,et al.  Alkali-Activated Cements and Concretes , 2003 .

[96]  Hua Xu,et al.  Effect of Source Materials on Geopolymerization , 2003 .

[97]  T. Cheng,et al.  Fire-resistant geopolymer produced by granulated blast furnace slag , 2003 .

[98]  J.S.J. van Deventer,et al.  THE EFFECT OF COMPOSITION AND TEMPERATURE ON THE PROPERTIES OF FLY ASH- AND KAOLINITE -BASED GEOPOLYMERS , 2002 .

[99]  N. Kuhnert.  Microwave-assisted reactions in organic synthesis--are there any nonthermal microwave effects? , 2002, Angewandte Chemie.

[100]  C. Kappe,et al.  Microwave-enhanced reactions under open and closed vessel conditions. A case study , 2002 .

[101]  M. Blanco-Varela,et al.  Influence of the starting kaolin on alkali-activated materials based on metakaolin. Study of the reaction parameters by isothermal conduction calorimetry , 2000 .

[102]  L. T. Zhuravlev.  The surface chemistry of amorphous silica. Zhuravlev model , 2000 .

[103]  María Teresa Blanco-Varela,et al.  Chemical stability of cementitious materials based on metakaolin , 1999 .

[104]  H. Chu,et al.  Thermal conductivity of polyurethane foams , 1999 .

[105]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part II. Material and leaching characteristics , 1999 .

[106]  T. Panagiotou,et al.  Observations on the Combustion of Polymers (Plastics): From Single Particles to Groups of Particles , 1998 .

[107]  Xiaohui Lu,et al.  Microwave-assisted catalytic combustion of diesel soot , 1997 .

[108]  J.S.J. van Deventer,et al.  The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications☆ , 1997 .

[109]  J. Wastiels,et al.  Low-temperature synthesized aluminosilicate glasses , 1996 .

[110]  M. Harmer,et al.  Effect of Pore Distribution on Microstructure Development: I, Matrix Pores , 1988 .

[111]  B. Schulz,et al.  Thermal conductivity of porous and highly porous materials , 1982 .

[112]  Г И Епифанов.  Физика твердого тела , 1977 .

[113]  C. Hilado.  Flammability Characteristics of Cellular Plastics , 1967 .