论文信息 - Study of high-coercivity sintered NdFeB magnets

Study of high-coercivity sintered NdFeB magnets

Abstract Magnetic powders for sintered NdFeB magnets have been prepared by using an advanced processing method including strip casting, hydrogen decrepitation, jet milling and rubber isotropic press. The effects of Dy, Ga and Co addition on the microstructure and magnetic properties of sintered magnets have been investigated. By adopting a suitable component ratio and adjusting proper technological parameters, we have prepared high-coercivity sintered NdFeB magnets with hard magnetic properties of j H c =25.6 kOe, B r =13.2 kG and ( BH ) max =39.9 MGOe. The temperature coefficient of coercivity of the magnets (between 20 and 150 °C) is –0.53%/°C. The magnetic properties at high temperature satisfy the needs of permanent magnet motors.

[1] W. Li,et al. The magnetic properties, thermal stability and microstructure of Nd–Fe–B/Ga sintered magnets prepared by blending method , 2001 .

[2] H. Kirchmayr,et al. The effect of substitutions on the hard magnetic properties of Nd-Fe-B based materials , 1989 .

[3] A. Kim,et al. HYDROGEN INDUCED CORROSION MECHANISM IN NDFEB MAGNETS , 1996 .

[4] M. Sagawa,et al. New material for permanent magnets on a base of Nd and Fe (invited) , 1984 .

[5] Haizeng Liu,et al. Grain alignment and microstructure of (Nd,Dy) 12.8(Fe,M) 80.7B 6.5 by strip casting , 2005 .

[6] Lianqing Yu,et al. Effects of Dy and Nb on the magnetic properties and corrosion resistance of sintered NdFeB , 2004 .

[7] M. Katter,et al. Top Nd-Fe-B magnets with greater than 56 MGOe energy density and 9.8 kOe coercivity , 2002 .

[8] Satoshi Hirosawa,et al. Magnetization and magnetic anisotropy of R2Fe14B measured on single crystals , 1986 .