Modelling and control of an unmanned excavator vehicle

Abstract This paper investigates the modelling and control of a full-scale excavator vehicle. A detailed analytical model for an unmanned excavator vehicle is developed. The model takes into account the kinematics and dynamics of the mobile platform (vehicle) and the excavation arm (links and hydraulic system). The model describes the dynamic relationship between the operator input commands (fuelling and joystick commands to excavation arm and steering lever) and the trajectories and forces of the excavator vehicle. The dynamic model of the excavation arm system is validated against measured data. The validation of the model is conducted in collaboration with QinetiQ Limited (the new science and technology company formed from the major part of DERA, the British Government's defence research and development organization). A unified model is important for design of control strategies, since in order to move the bucket of a mobile excavator, movements of the entire vehicle are required. A key requirement for automating the excavation task is automated trajectory tracking, and a proportional-integral-derivative (PID) controller for trajectory tracking is developed and tested. It is noted that even though the results presented in this paper are focused on a particular excavator, the research is generic and can be adapted to any tracked ground vehicle with an on-board closed-chain manipulator.

[1]  Leonhard E. Bernold,et al.  Experimental Studies on Mechanics of Lunar Excavation , 1991 .

[2]  J. Fourquet,et al.  Coordinating mobility and manipulation using nonholonomic mobile manipulators , 1999 .

[3]  M. de Mathelin,et al.  Robust control of robot manipulators: A survey , 1999 .

[4]  Fei-Yue Wang,et al.  Fuzzy behavior integration and action fusion for robotic excavation , 1996, IEEE Trans. Ind. Electron..

[5]  Darcy M. Bullock,et al.  Force and Geometry Constraints in Robot Excavation , 1990 .

[6]  Leonhard E. Bernold,et al.  Motion and Path Control for Robotic Excavation , 1993 .

[7]  T. I. James Tsay,et al.  Robust nonlinear control of robot manipulators , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[8]  Ahmad Hemami,et al.  Modelling, analysis and preliminary studies for automatic scooping , 1993, Adv. Robotics.

[9]  Rob H. Bracewell,et al.  The Development of Research Models for Automatic Excavation , 1988 .

[10]  R. M. DeSantis.  Modeling and path-tracking for a load-haul-dump mining vehicle , 1997 .

[11]  Sanjiv Singh,et al.  A Robotic Excavator for Autonomous Truck Loading , 1999, Auton. Robots.

[12]  Kaspar Althoefer,et al.  A generalized Newton method for identification of closed-chain excavator arm parameters , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[13]  Sabri Cetinkunt,et al.  Modeling, identification, and real-time control of bucket hydraulic system for a wheel type loader earth moving equipment , 1998 .

[14]  Antti J. Koivo.  Kinematics of Excavators (Backhoes) for Transferring Surface Material , 1994 .

[15]  Murali Krishna,et al.  Constructing Hydraulic Robot Models Using Memory-Based Learning , 1999 .

[16]  Juan Andrade-Cetto,et al.  Modeling and Control of Excavator Dynamics during Digging Operation , 1996 .

[17]  Hugh Durrant-Whyte,et al.  Impedance control of a hydraulically actuated robotic excavator , 2000 .

[18]  Miroslaw J. Skibniewski,et al.  Dynamic Model of Excavator , 1993 .

[19]  Hugh F. Durrant-Whyte,et al.  Robotic excavation in construction automation , 2002, IEEE Robotics Autom. Mag..

[20]  M. Vidyasagar,et al.  Roboust nonlinear control of robot manipulators , 1985, 1985 24th IEEE Conference on Decision and Control.