Iron-containing intermetallic phases in Al-Si based casting alloys

Iron is the most common impurity in aluminium and its alloys. It is not easily removed and it can cause adverse effects to ductility and castability, particularly in the popular Al-Si based casting alloys. The choice of whether to use alloys based on primary aluminium (low Fe levels, high cost) or secondary aluminium (moderate/high Fe levels, cheaper) for a cast product is often a commercial decision. However, a compromise may be necessary between the desire for reduced metal cost and the need to maximise casting productivity via reduced defect formation and to minimise the deleterious effect of iron on mechanical properties. This paper discusses the various sources of iron, how it enters aluminium alloys, the way that iron leads to the formation of complex intermetallic phases during solidification and how these phases can adversely affect mechanical properties (especially ductility) and lead to the formation of excessive shrinkage defects. The formation of the iron-containing β phase will be highlighted using the latest in situ solidification study using synchrotron X-radiation. The paper offers guidelines to the practical levels of iron that can be tolerated and how to minimise the negative effects of iron.

[1]  C. Dinnis,et al.  Manganese as a "neutraliser" of iron-related porosity in Al-Si foundry alloys , 2007 .

[2]  C. H. Cáceres,et al.  Enhanced ductility in Al-Si-Cu-Mg foundry alloys with high Si content , 2006 .

[3]  H. Phillips.  Annotated equilibrium diagrams of some aluminium alloy systems , 1959 .

[4]  D. StJohn,et al.  The role of iron in the formation of porosity in Al-Si-Cu-based casting alloys: Part II. A phase-diagram approach , 1999 .

[5]  J. A. Taylor,et al.  The role of iron in the formation of porosity in Al-Si-Cu-based casting alloys: Part III. A microstructural model , 1999 .

[6]  John A. Taylor,et al.  Porosity formation and eutectic growth in Al-SI-Cu-Mg alloys containing iron and manganese , 2004 .

[7]  D. Lloyd,et al.  Review of the techniques for the extraction of second-phase particles from aluminum alloys , 1996 .

[8]  M. Suéry,et al.  In situ study of nucleation and growth of the irregular alpha-Al/beta-Al5FeSi eutectic by 3-D synchrotron X-ray microtomography , 2010 .

[9]  M. Couper,et al.  An empirical analysis of trends in mechanical properties of T6 heat treated Al-Si-Mg casting alloys , 2000 .

[10]  S. Murali,et al.  Effect of Trace Additions (Be, Cr, Mn and Co) on the Mechanical Properties and Fracture Toughness of Fe-containing Al-7Si-0.3Mg Alloy , 1994 .

[11]  F. H. Samuel,et al.  Porosity formation in AI-9 Wt Pct Si-3 Wt Pct Cu alloy systems: Metallographic observations , 1996 .

[12]  F. Samuel,et al.  Crystallization behavior of iron-containing intermetallic compounds in 319 aluminum alloy , 1994 .

[13]  S. P. Ng’ang’a,et al.  Influence of iron on castability and properties of aluminium silicon alloys: literature review , 2003 .

[14]  A. K. Dahle,et al.  As-cast morphology of iron-intermetallics in Al–Si foundry alloys , 2005 .

[15]  J. Gruzleski,et al.  The Effect of Solidification Condition and Chemistry on the Formation and Morphology of Complex Intermetallic Compounds in Aluminium—Silicon Alloys , 1994 .

[16]  C. Dinnis,et al.  Iron-related porosity in Al–Si–(Cu) foundry alloys , 2006 .

[17]  J. A. Taylor.  Metal-related castability effects in aluminium foundry alloys , 1996 .

[18]  G. Dunlop,et al.  The influence of Fe and Cr on the microstructure of cast Al-Si-Mg alloys , 1986 .

[19]  C. Simensen,et al.  Analysis of intermetallic particles in aluminium by dissolution of the sample in butanol , 1984 .

[20]  G. B. Schaffer,et al.  The role of iron in the formation of porosity in Al-Si-Cu-based casting alloys: Part I. Initial experimental observations , 1999 .

[21]  D. StJohn,et al.  Influence of Mg Content on the Microstructure and Solid Solution Chemistry of Al-7%Si-Mg Casting Alloys During Solution Treatment , 2000 .

[22]  C. H. Cáceres,et al.  Strength-Ductility Behaviour of Al-Si-Cu-Mg Casting Alloys in T6 Temper , 2003 .

[23]  A. Samuel,et al.  Precipitation of β-Al5FeSi Phase Platelets in Al-Si Based Casting Alloys , 2009 .

[24]  M. Kral.  A crystallographic identification of intermetallic phases in Al–Si alloys , 2005 .