论文信息 - Brillouin Erbium Ytterbium Fiber Laser

Brillouin Erbium Ytterbium Fiber Laser

This paper presents properties and characterizations of the Brillouin Erbium-Ytterbium Doped Fiber Laser (BEYDFL) system. BEYDFL systems have the potential to become multi-channel source in Dense Wavelength Division Multiplexing (DWDM) system. BEYDFL is a unique laser source that can produces multiple channels simultaneously with dense and constant channel spacing of about 0.084 nm. This system utilizes the combination of two gain medium which are Brillouin gain and Erbium-Ytterbium gain to produce laser comb through cascading process. In the characterization stage of BEYDFL, laser comb consists of 22 channels with 1.34 dB of channelpsilas power variation operating in 1535 nm region was obtained.

S. Harun | L.T.S. Ying | L. T. Fat

[1] G. Theophilopoulos,et al. 50 channel and 50 GHz multi-wavelength laser source , 2001, Proceedings 27th European Conference on Optical Communication (Cat. No.01TH8551).

[2] Peter J. Delfyett,et al. 20/spl times/5 Gbit/s optical WDM-TDM transmitter using a single-stripe multiwavelength mode-locked semiconductor laser , 1998 .

[3] John M. Senior,et al. Wavelength division multiplexed optical point-sensor networks using injection laser diode sources , 1996 .

[4] Anne C. Tropper,et al. CW room temperature upconversion lasing at blue, green and red wavelengths in infrared-pumped Pr3+-doped fluoride fibre , 1991 .

[5] H. Poignant,et al. Red upconversion Yb-sensitised Pr fluoride fibre laser pumped in 0.8 mu m region , 1991 .

[6] L. Bickers,et al. LED spectral slicing for single-mode local loop applications , 1988 .

[7] R. Smith. Optical power handling capacity of low loss optical fibers as determined by stimulated Raman and brillouin scattering. , 1972, Applied optics.

[8] H. Avramopoulos,et al. 10 x 30 GHz pulse train generation from semiconductor amplifier fiber ring laser , 2000, IEEE Photonics Technology Letters.