Development of Composite Hydraulic Actuators: A Review

With the development of engineering materials, as well as the growing requirements for weight reduction and the reduction of energy consumption by mechanical systems, attempts have been made to utilize composite materials in the design of hydraulic cylinders. In many cases, the reduction in the weight of the actuators may lead to a reduction in the values of bending moments acting on the booms of working machines, as well as leading to a reduction in the power demand in drive systems. The use of composite materials can also increase the reliability of cylinders in corrosive environments and places with strong electromagnetic fields. This paper presents the development of hydraulic actuators made of composite materials, presenting both the achievements of research centers and commercial companies. The main research and engineering problems are presented along with the methods of solving them resulting from the literature available. The directions for further research that should be undertaken in order to increase reliability, improve efficiency, and reduce weight are also outlined.

[1]  O. Sahin,et al.  Design of the composite hydraulic cylinder with geodesic dome trajectory: A numerical study , 2022, Polymer Composites.

[2]  M. Lubecki,et al.  Effects of surface preparation on the adhesion of UV-aged polyurethane coatings , 2022, International Journal of Adhesion and Adhesives.

[3]  Y. Li,et al.  Design and Experiment on Light Weight Hydraulic Cylinder Made of Carbon Fiber Reinforced Polymer , 2022, Composite Structures.

[4]  Seok-Soon Lee,et al.  Design and Experimental Analyses of Hybrid Piston Rods Used in Hydraulic Cylinders under Axial Load , 2021, Applied Sciences.

[5]  L. Solazzi,et al.  Fatigue design of hydraulic cylinder made of composite material , 2021, Composite Structures.

[6]  L. Solazzi.  Stress variability in multilayer composite hydraulic cylinder , 2020 .

[7]  M. Lubecki,et al.  Numerical and Experimental Analysis of the Base of a Composite Hydraulic Cylinder Made of PET , 2020, Lecture Notes in Mechanical Engineering.

[8]  Justyna Skowrońska,et al.  Modern Materials and Surface Modification Methods Used in the Manufacture of Hydraulic Actuators , 2020, Lecture Notes in Mechanical Engineering.

[9]  Khanh Duong Tran,et al.  Dynamics Analysis and Numerical Simulation of Large-Scale Hydraulic Cylinder Actuators , 2020 .

[10]  Pierre Renaud,et al.  Multi-material 3D printed hydraulic actuator for medical robots , 2020, Rapid Prototyping Journal.

[11]  S. Mantovani.  Feasibility Analysis of a Double-Acting Composite Cylinder in High-Pressure Loading Conditions for Fluid Power Applications , 2020 .

[12]  L. Solazzi.  Design and experimental tests on hydraulic actuator made of composite material , 2020 .

[13]  T. Leśniewski,et al.  COMPARATIVE STUDIES OF TRIBOLOGICAL PROPERTIES OF SELECTED POLYMER RESINS FOR USE IN HYDRAULIC SYSTEMS , 2019, Tribologia.

[14]  L. Solazzi,et al.  Telescopic Hydraulic Cylinder Made of Composite Material , 2019, Applied Composite Materials.

[15]  L. Solazzi.  Feasibility study of hydraulic cylinder subject to high pressure made of aluminum alloy and composite material , 2019, Composite Structures.

[16]  Mohamad El Asswad,et al.  Experimental Estimation of Friction and Friction Coefficient of a Lightweight Hydraulic Cylinder Intended for Robotics Applications , 2018, International Journal of Applied Mechanics.

[17]  A. Abdellatif,et al.  Development of lightweight hydraulic cylinder for humanoid robots applications , 2018 .

[18]  Nan Li,et al.  Multi-degree-of-freedom Manipulator Driven by Micro Hydraulic System , 2017 .

[19]  T. Nowak,et al.  Theoretical, numerical and experimental analysis of thick walled fiber metal laminate tube under axisymmetric loads , 2015 .

[20]  T. Nowak,et al.  Prediction of elasto-plastic behavior of pressurized composite reinforced metal tube by means of Acoustic Emission measurements and theoretical investigation , 2014 .

[21]  L. Kroll,et al.  Nanocomposite glide surfaces for FRP hydraulic cylinders – Evaluation and test , 2014 .

[22]  William K. Durfee,et al.  Analysis of Small-Scale Hydraulic Actuation Systems , 2013 .

[23]  William J. Joost,et al.  Reducing Vehicle Weight and Improving U.S. Energy Efficiency Using Integrated Computational Materials Engineering , 2012 .

[24]  Jerzy Rojek,et al.  Practical fatigue analysis of hydraulic cylinders and some design recommendations , 2006 .

[25]  Gary W. Krutz,et al.  A displacement sensor for nonmetallic hydraulic cylinders , 2003 .

[26]  H. Takayanagi,et al.  Analysis of multi-layered filament-wound composite pipes under internal pressure , 2001 .

[27]  Autar Kaw,et al.  Mechanics of Composite Materials , 1997 .

[28]  Mahmood Husein Datoo,et al.  Mechanics of Fibrous Composites , 1991 .

[29]  C. Li,et al.  Composite Materials (I) , 1975 .

[30]  J. Kaufman,et al.  Fatigue and fracture characteristics of aluminum alloy cylinders under internal pressure , 1972 .

[31]  TRANSBALTICA XII: Transportation Science and Technology , 2022, Lecture Notes in Intelligent Transportation and Infrastructure.

[32]  Fatigue and Fracture of Materials and Structures , 2022, Structural Integrity.

[33]  Yibo Li,et al.  Experimental investigation of friction behaviors for double-acting hydraulic actuators with different reciprocating seals , 2021 .

[34]  Alexander Kaluza,et al.  Concurrent Design & Life Cycle Engineering in Automotive Lightweight Component Development , 2017 .

[35]  U. Mumtahina,et al.  ALTERNATIVE MATERIALS IN HYDRAULIC CYLINDER DESIGN-APPLICATION OF CARBON FIBRE COMPONENTS , 2015 .

[36]  T. Nowak,et al.  NON-LINEAR MECHANICAL ANALYSIS OF THE COMPOSITE OVERWRAPPED CYLINDER FOR HYDRAULIC APPLICATIONS , 2013 .

[37]  S. Beretta,et al.  Failure investigation and design improvements of Al 7075 piston for hydraulic actuators , 2006 .