Factors to be Considered in Bulk Heterojunction Polymer Solar Cells Fabricated by the Spray Process

One of the attractions of solution-processed polymer solar cells (PSCs) is the potential for low-cost production by high-throughput roll-to-roll processes. The spray process can be suggested as an elegant alternative for PSCs fabrication due to its high production speed. We highlight the effects of sprayed droplet sizes on the film topography and drying time of droplets. We relate the latter to the PSCs device performances. The transfer efficiency and deposition rate of the spray process as a function of the droplet size are investigated for the high production speed and lowering the cost. PSC device fabrication with an optimized spray-operating condition yielded a power conversion efficiency of 3.4%. The comparable efficiency of PSCs fabricated by a roll-to-roll compatible process compared to spin-coated one achieved in this paper brings these devices one step closer to the realization of low-cost PSCs production.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[3]  Keith Masters,et al.  Spray drying handbook , 1979 .

[4]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[5]  Manikandan Jayaraman,et al.  Self-orienting head-to-tail poly(3-alkylthiophenes): new insights on structure-property relationships in conducting polymers , 1993 .

[6]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[7]  Tian-An Chen,et al.  Regiocontrolled Synthesis of Poly(3-alkylthiophenes) Mediated by Rieke Zinc: Their Characterization and Solid-State Properties , 1995 .

[8]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.

[9]  C. Liew,et al.  The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids , 1995 .

[10]  H. Sirringhaus,et al.  Integrated optoelectronic devices based on conjugated polymers , 1998, Science.

[11]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[12]  Nasser N Peyghambarian,et al.  Fabrication of bulk heterojunction plastic solar cells by screen printing , 2001 .

[13]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[14]  Christoph J. Brabec,et al.  Organic photovoltaics: technology and market , 2004 .

[15]  D. Bradley,et al.  Composition and annealing effects in polythiophene/fullerene solar cells , 2005 .

[16]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[17]  Valentin D. Mihailetchi,et al.  Origin of the enhanced performance in poly"3-hexylthiophene…: †6,6‡-phenyl C 61 -butyric acid methyl ester solar cells upon slow drying of the active layer , 2006 .

[18]  Daniel Moses,et al.  Method for increasing the photoconductive response in conjugated polymer/fullerene composites , 2006 .

[19]  Christoph J. Brabec,et al.  Performance Analysis of Printed Bulk Heterojunction Solar Cells , 2006 .

[20]  Juhwan Kim,et al.  Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation , 2007 .

[21]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[22]  X. Hao,et al.  Control of the interchain pi-pi interaction and electron density distribution at the surface of conjugated poly(3-hexylthiophene) thin films. , 2007, The journal of physical chemistry. B.

[23]  Giyoong Tae,et al.  Efficient Polymer Solar Cells Fabricated by Simple Brush Painting , 2007 .

[24]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[25]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[26]  Christoph J. Brabec,et al.  Solution-Processed Organic Solar Cells , 2008 .

[27]  Klaus Meerholz,et al.  Controlling Morphology in Polymer–Fullerene Mixtures , 2008 .

[28]  K. Meerholz,et al.  Inside Front Cover: Controlling Morphology in Polymer–Fullerene Mixtures (Adv. Mater. 2/2008) , 2008 .

[29]  John E. Anthony,et al.  Spray-deposited poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) top electrode for organic solar cells , 2008 .

[30]  Garry Rumbles,et al.  Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition , 2008 .

[31]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[32]  Paolo Lugli,et al.  Fully spray coated organic photodiodes. , 2009, Nano letters.

[33]  Alex K.-Y. Jen,et al.  Spraycoating of silver nanoparticle electrodes for inverted polymer solar cells , 2009 .

[34]  Christoph J. Brabec,et al.  Topographical and morphological aspects of spray coated organic photovoltaics , 2009 .

[35]  M. Liberatore,et al.  Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells , 2009 .

[36]  Gang Li,et al.  Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells. , 2009, Journal of the American Chemical Society.

[37]  Reuben T. Collins,et al.  Ultrasonic spray deposition for production of organic solar cells , 2009 .

[38]  Jan Genoe,et al.  Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells , 2009 .

[39]  Soeren Steudel,et al.  Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells , 2009 .

[40]  Luping Yu,et al.  Development of new semiconducting polymers for high performance solar cells. , 2009, Journal of the American Chemical Society.

[41]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[42]  W. Marsden.  I and J , 2012 .