Sensor development and optimization for a proton exchange membrane fuel cell system in automotive applications

Abstract This paper is on the subject of sensor development and sensor-set size optimization approaches for Proton Exchange Membrane Fuel Cell (PEMFC) system in Fuel Cell Electric Vehicles (FCEV) applications. Sensors are classified as physical sensors and gas sensors. Physical sensors are used to detect signals (pressure, mass flow, etc.) which are related to PEMFC system operating state and control. Gas sensors consist of the hydrogen leakage detector for safety reasons and the environment sensor system which is built with various gas sensors to detect gas contaminations (COx, SOx, etc.). Depending on the sensor development review and the sensor specifications comparisons, sensors owning low cost, small volume, fast response, high resolution, excellent stability and durability are favored in FCEV applications. Nevertheless, numerous sensors result in the increase of system complexity, cost, and even the reduction of effectiveness for the fuel cell prognostics and health management algorithms. Thus, sensor-set size optimization and capability validation approaches (model-based, data-driven and hybrid) are reviewed in detail. As a result, a sensor-set size optimization framework is proposed. Some future work on fuel cell sensor system development and optimization is also suggested to facilitate the move towards commercialization.

[1]  Zhen Jin,et al.  Metal Oxide Nanostructures and Their Gas Sensing Properties: A Review , 2012, Sensors.

[2]  N. Djilali,et al.  In situ measurement of relative humidity in a PEM fuel cell using fibre Bragg grating sensors , 2014 .

[3]  S. G. Chatterjee,et al.  Graphene–metal oxide nanohybrids for toxic gas sensor: A review , 2015 .

[4]  Arezoo Emadi,et al.  Advanced Micro- and Nano-Gas Sensor Technology: A Review , 2019, Sensors.

[5]  Roger C. Baker,et al.  Turbine flowmeters: II. Theoretical and experimental published information , 1993 .

[6]  Rachid Outbib,et al.  Adaptive Prognostic of Fuel Cells by Implementing Ensemble Echo State Networks in Time-Varying Model Space , 2020, IEEE Transactions on Industrial Electronics.

[7]  Hyunchul Park,et al.  Capacitive humidity sensor design based on anodic aluminum oxide , 2009 .

[8]  Wen-Quan Tao,et al.  Thin film thermocouple fabrication and its application for real-time temperature measurement inside PEMFC , 2019, International Journal of Heat and Mass Transfer.

[9]  S. Shi,et al.  High temperature CO2 sensing and its cross-sensitivity towards H2 and CO gas using calcium doped ZnO thin film coated langasite SAW sensor , 2019 .

[10]  G. Korotcenkov.  Metal oxides for solid-state gas sensors: What determines our choice? , 2007 .

[11]  Nicolae Barsan,et al.  Solid State Gas Sensor Research in Germany – a Status Report , 2009, Sensors.

[12]  Wei-Jung Hsieh,et al.  Embedded flexible micro-sensors in MEA for measuring temperature and humidity in a micro-fuel cell , 2008 .

[13]  Gunther Roelkens,et al.  On-Chip Non-Dispersive Infrared CO2 Sensor Based on an Integrating Cylinder † , 2019, Sensors.

[14]  Michael J. Tierney,et al.  Electrochemical gas sensor with extremely fast response times , 1993 .

[15]  Bowen Wang,et al.  Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology , 2020, Energy and AI.

[16]  Lei Mao,et al.  Application of the Sensor Selection Approach in Polymer Electrolyte Membrane Fuel Cell Prognostics and Health Management , 2017 .

[17]  Shimshon Gottesfeld,et al.  Effect of Ammonia as Potential Fuel Impurity on Proton Exchange Membrane Fuel Cell Performance , 2002 .

[18]  Grzegorz L. Pankanin,et al.  The vortex flowmeter: various methods of investigating phenomena , 2005 .

[19]  Julian W. Gardner,et al.  A low cost MEMS based NDIR system for the monitoring of carbon dioxide in breath analysis at ppm levels , 2016 .

[20]  Lei Mao,et al.  Selection of optimal sensors for predicting performance of polymer electrolyte membrane fuel cell , 2016 .

[21]  Marco Sorrentino,et al.  A review on non-model based diagnosis methodologies for PEM fuel cell stacks and systems , 2013 .

[22]  Z. Ahmad,et al.  Organic Thin‐Film Capacitive and Resistive Humidity Sensors: A Focus Review , 2018, Advanced Materials Interfaces.

[23]  Fei Gao,et al.  Data-driven proton exchange membrane fuel cell degradation predication through deep learning method , 2018, Applied Energy.

[24]  S. Kær,et al.  Thin film thermocouples for in situ membrane electrode assembly temperature measurements in a polybenzimidazole-based high temperature proton exchange membrane unit cell , 2010 .

[25]  Sung Hyun Kim,et al.  Sodium borohydride as the hydrogen supplier for proton exchange membrane fuel cell systems , 2006 .

[26]  Walter Lang,et al.  Detection limit improvement for NDIR ethylene gas detectors using passive approaches , 2012 .

[27]  Ignaz Eisele,et al.  Polyimide-Based Capacitive Humidity Sensor , 2018, Sensors.

[28]  Lisa M. Jackson,et al.  Effect of Sensor Set Size on Polymer Electrolyte Membrane Fuel Cell Fault Diagnosis , 2018, Sensors.

[29]  P. Paranthoen,et al.  The effect of the thermal prong—wire interaction on the response of a cold wire in gaseous flows (air, argon and helium) , 1982, Journal of Fluid Mechanics.

[30]  T. Loučka.  Adsorption and oxidation of sulphur and of sulphur dioxide at the platinum electrode , 1971 .

[31]  R. Moradi,et al.  Calibration of low-pressure MEMS gas sensor for detection of hydrogen gas , 2018 .

[32]  Chi-Yuan Lee,et al.  In-Situ Measurement of High-Temperature Proton Exchange Membrane Fuel Cell Stack Using Flexible Five-in-One Micro-Sensor , 2016, Sensors.

[33]  Chih-Ping Chang,et al.  A Novel Method for In-Situ Monitoring of Local Voltage, Temperature and Humidity Distributions in Fuel Cells Using Flexible Multi-Functional Micro Sensors , 2011, Sensors.

[34]  Ananya Dey,et al.  Semiconductor metal oxide gas sensors: A review , 2018 .

[35]  Hithesh K. Gatty,et al.  MEMS-based electrochemical gas sensors and wafer-level methods , 2015 .

[36]  Trieu-Vuong Dinh,et al.  A review on non-dispersive infrared gas sensors: Improvement of sensor detection limit and interference correction , 2016 .

[37]  Kazuhiko Shinohara,et al.  The impact of air contaminants on PEMFC performance and durability , 2008 .

[38]  R. Rocheleau,et al.  Environmental sensor system for expanded capability of PEM fuel cell use in high air contaminant conditions , 2018, International Journal of Hydrogen Energy.

[39]  Xinmin Lai,et al.  In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells , 2019, Journal of Power Sources.

[40]  Z. Qi,et al.  Poisoning of Proton Exchange Membrane Fuel Cell Cathode by CO in the Anode Fuel , 2001 .

[41]  P. Vie,et al.  Influence of Ammonium on Conductivity and Water Content of Nafion 117 Membranes , 2004 .

[42]  M. Gong,et al.  Thick films of copper-titanate resistive humidity sensor , 2005 .

[43]  K. Hill,et al.  Fiber Bragg grating technology fundamentals and overview , 1997 .

[44]  Yuelin Wang,et al.  Micro/Nano Gas Sensors: A New Strategy Towards In-Situ Wafer-Level Fabrication of High-Performance Gas Sensing Chips , 2015, Scientific Reports.

[45]  Kensall D. Wise,et al.  A high-speed capacitive humidity sensor with on-chip thermal reset , 2000 .

[47]  H. Lal,et al.  The nature of species adsorbed on platinum from SO2 solutions , 1978 .

[48]  Andrew Dicks,et al.  Hydrogen generation from natural gas for the fuel cell systems of tomorrow , 1996 .

[49]  W. Xing,et al.  Greedy nonlinear autoregression for multifidelity computer models at different scales , 2020 .

[50]  Zhichun Liu,et al.  In situ measurement of temperature distribution in proton exchange membrane fuel cell I a hydrogen–air stack , 2013 .

[51]  Salah Laghrouche,et al.  Degradation prediction of proton exchange membrane fuel cell based on grey neural network model and particle swarm optimization , 2019, Energy Conversion and Management.

[52]  A. Bitadze,et al.  A combined ultrasonic flow meter and binary vapour mixture analyzer for the ATLAS silicon tracker , 2012, 1210.4835.

[53]  Dnyandeo Pawar,et al.  A review on nanomaterial-modified optical fiber sensors for gases, vapors and ions , 2019, Microchimica Acta.

[54]  Liangfei Xu,et al.  Multi-objective component sizing based on optimal energy management strategy of fuel cell electric vehicles , 2015 .

[55]  Chi-Yuan Lee,et al.  Use of flexible micro-temperature sensor to determine temperature in situ and to simulate a proton exchange membrane fuel cell , 2011 .

[56]  Young-Jin Choi,et al.  Novel fabrication of an SnO2 nanowire gas sensor with high sensitivity , 2008, Nanotechnology.

[57]  Lei Mao,et al.  Effectiveness of a Novel Sensor Selection Algorithm in PEM Fuel Cell On-Line Diagnosis , 2018, IEEE Transactions on Industrial Electronics.

[58]  Loreto Daza,et al.  Assessment of the performance of a PEMFC in the presence of CO , 2005 .

[59]  Daniel Hissel,et al.  A review of DC/DC converter-based electrochemical impedance spectroscopy for fuel cell electric vehicles , 2019, Renewable Energy.

[60]  K. S. Dhathathreyan,et al.  Effect of Carbon Dioxide and Ammonia on Polymer Electrolyte Membrane Fuel Cell Stack Performance , 2003 .

[61]  Winfried Vonau,et al.  Recent developments in electrochemical sensor application and technology—a review , 2009 .

[62]  Nafiz Kahraman,et al.  Experimental study of gasoline-ethanol-hydrogen blends combustion in an SI engine , 2017 .

[63]  Y. B. Kim,et al.  Analyzing in-plane temperature distribution via a micro-temperature sensor in a unit polymer electrolyte membrane fuel cell , 2014 .

[64]  G. Bidan,et al.  Electroconducting conjugated polymers: New sensitive matrices to build up chemical or electrochemical sensors. A review☆ , 1992 .

[65]  Noureddine Zerhouni,et al.  Proton exchange membrane fuel cell ageing forecasting algorithm based on Echo State Network , 2017 .

[66]  Zhongliang Li,et al.  Data-driven fault diagnosis for PEMFC systems , 2014 .

[67]  Daniel Hissel,et al.  Fuel cell operation under degraded working modes and study of diode by-pass circuit dedicated to multi-stack association , 2008 .

[68]  Xianguo Li,et al.  Carbon monoxide poisoning of proton exchange membrane fuel cells , 2001 .

[69]  J. W. Van Zee,et al.  Effects of Hydrogen Sulfide on the Performance of a PEMFC , 2003 .

[70]  Hao Liu,et al.  Prognostics methods and degradation indexes of proton exchange membrane fuel cells: A review , 2020 .

[71]  L. Boon-Brett,et al.  Developments in gas sensor technology for hydrogen safety , 2014 .

[72]  P R Warburton,et al.  Amperometric gas sensor response times. , 1998, Analytical chemistry.

[73]  Mohd Nizar Hamidon,et al.  Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review , 2014, Sensors.

[74]  Zezhou Ye,et al.  Hydrogen fuel cell diagnostics using random forest and enhanced feature selection , 2020 .

[75]  N. Djilali,et al.  In-fibre Bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell , 2009 .

[76]  Tim Gilles.  Automotive Service: Inspection, Maintenance, Repair , 2007 .

[77]  Y. Rao,et al.  Fiber Bragg grating sensors: principles and applications , 1998 .

[78]  P. Moseley,et al.  Solid state gas sensors , 1997 .

[79]  Stefan Bauer,et al.  Air Flow Meter 8. Generation: A Modular Approach for New Diesel System Challenges , 2013 .

[80]  Jean-Louis Ouvrier-Buffet,et al.  Low power CO2 NDIR sensing using a micro-bolometer detector and a micro-hotplate IR-source , 2013 .

[81]  Daniel Hissel,et al.  Characterisation and modelling of a 5 kW PEMFC for transportation applications , 2006 .

[82]  Peyman Servati,et al.  Room temperature ultra-sensitive resistive humidity sensor based on single zinc oxide nanowire , 2012 .

[83]  C. Langhammer,et al.  A fiber-optic nanoplasmonic hydrogen sensor via pattern-transfer of nanofabricated PdAu alloy nanostructures. , 2018, Nanoscale.

[84]  J. W. Van Zee,et al.  The Effect of Temperature and Pressure on the Performance of a PEMFC Exposed to Transient CO Concentrations , 2003 .

[85]  Lena Spitthoff,et al.  Influence of operating conditions on permeation of CO2 through the membrane in an automotive PEMFC system , 2019, International Journal of Hydrogen Energy.

[86]  Byeong Kwon Ju,et al.  Micromachined catalytic combustible hydrogen gas sensor , 2011 .

[87]  San-Shan Hung,et al.  A Portable Array-Type Optical Fiber Sensing Instrument for Real-Time Gas Detection , 2016, Sensors.

[88]  Nigel A. David.  Fibre optic sensors for PEM fuel cells , 2011 .

[89]  A. Heinzel,et al.  Influence of urban air on proton exchange membrane fuel cell vehicles – Long term effects of air contaminants in an authentic driving cycle , 2018, Journal of Power Sources.

[90]  Brigitte Chebel-Morello,et al.  Direct Remaining Useful Life Estimation Based on Support Vector Regression , 2017, IEEE Transactions on Industrial Electronics.

[91]  K. Ikeda,et al.  Silicon pressure sensor integrates resonant strain gauge on diaphragm , 1990 .

[92]  J. W. Van Zee,et al.  Assessing durability of cathodes exposed to common air impurities , 2004 .

[93]  S. Akbar,et al.  Solid‐State Gas Sensors: A Review , 1992 .

[94]  Fatiha Nejjari,et al.  Model-based Optimal Sensor Placement Approaches to Fuel Cell Stack System Fault Diagnosis* , 2012 .

[95]  S. Kandlikar,et al.  Determination of effective water vapor diffusion coefficient in pemfc gas diffusion layers , 2011 .

[96]  Yanan Zhang,et al.  A New Hydrogen Sensor Based on SNS Fiber Interferometer with Pd/WO3 Coating , 2017, Sensors.

[97]  G. S. Kapur,et al.  Performance evaluation of PEM fuel cell stack on hydrogen produced in the oil refinery , 2020 .

[98]  Liwei Lin,et al.  An electrothermal carbon nanotube gas sensor. , 2007, Nano letters.

[99]  G.J.M. Janssen,et al.  Modelling study of CO2 poisoning on PEMFC anodes , 2004 .

[100]  Jie Fu,et al.  The effect of ambient contamination on PEMFC performance , 2007 .

[101]  A. Mozalev,et al.  Non-silicon MEMS platforms for gas sensors , 2016 .

[102]  Paul Leonard Adcock,et al.  The effects of battlefield contaminants on PEMFC performance , 2000 .

[103]  Z. Qi,et al.  Effect of CO in the anode fuel on the performance of PEM fuel cell cathode , 2002 .

[104]  T. M. Lillesand,et al.  Remote Sensing and Image Interpretation , 1980 .

[105]  Pingwen Ming,et al.  Hydrogen sulfide poisoning and recovery of PEMFC Pt-anodes , 2007 .

[106]  Daniel Hissel,et al.  Diagnostic & health management of fuel cell systems: Issues and solutions , 2016, Annu. Rev. Control..

[107]  Xuan Cheng,et al.  A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation , 2007 .

[108]  Xi Li,et al.  Fault detection and assessment for solid oxide fuel cell system gas supply unit based on novel principal component analysis , 2019, Journal of Power Sources.

[109]  Lei Mao,et al.  Polymer electrolyte membrane fuel cell fault diagnosis and sensor abnormality identification using sensor selection method , 2020 .

[110]  André Faaij,et al.  Future prospects for production of methanol and hydrogen from biomass , 2002 .