Cemented fixation with PMMA or Bis-GMA resin hydroxyapatite cement: effect of implant surface roughness.

[1]  G. Dawn,et al.  Dental veneers fitting: a cause for reactions to epoxy resin and BIS‐GMA , 2003, Clinical and experimental dermatology.

[2]  W. Walsh,et al.  Hydroxyapatite Composite Resin Cement Augmentation of Pedicle Screw Fixation , 2003, Clinical orthopaedics and related research.

[3]  William J Maloney,et al.  Analysis of Long-Term Cemented Total Hip Arthroplasty Retrievals , 2002, Clinical orthopaedics and related research.

[4]  W R Walsh,et al.  The effect of substrate roughness and hydroxyapatite coating thickness on implant shear strength. , 2002, The Journal of arthroplasty.

[5]  P. Morberg,et al.  The influence of design parameters on cortical strain distribution of a cementless titanium femoral stem. , 2002, Medical engineering & physics.

[6]  D. Wirz,et al.  Current state of cement fixation in THR. , 2002, Acta orthopaedica Belgica.

[7]  Venkatesh Saligrama,et al.  Stem surface roughness alters creep induced subsidence and 'taper-lock' in a cemented femoral hip prosthesis. , 2001, Journal of biomechanics.

[8]  Y. Kitamura,et al.  Bioactive bone cement: Effect of silane treatment on mechanical properties and osteoconductivity. , 2001, Journal of biomedical materials research.

[9]  J. Kabo,et al.  Influence of Cement Technique on the Interface Strength of Femoral Components , 2000, Clinical orthopaedics and related research.

[10]  T. Schmalzried,et al.  The significance of stem-cement loosening of grit-blasted femoral components. , 2000, Orthopedics.

[11]  W. Bonfield,et al.  Tensile characteristics of ten commercial acrylic bone cements. , 2000, Journal of biomedical materials research.

[12]  M. Saito,et al.  Mechanical evaluation of a bio-active bone cement for total hip arthroplasty , 2000, Medical and Biological Engineering and Computing.

[13]  W R Walsh,et al.  Morphometric and mechanical evaluation of titanium implant integration: comparison of five surface structures. , 2000, Journal of biomedical materials research.

[14]  L. Rakotomanana,et al.  The fixation of the cemented femoral component , 2000 .

[15]  P F Leyvraz,et al.  The fixation of the cemented femoral component. Effects of stem stiffness, cement thickness and roughness of the cement-bone surface. , 2000, The Journal of bone and joint surgery. British volume.

[16]  R C Johnston,et al.  The effects of surface roughness and polymethylmethacrylate precoating on the radiographic and clinical results of the Iowa hip prosthesis. A study of patients less than fifty years old. , 1999, The Journal of bone and joint surgery. American volume.

[17]  N Verdonschot,et al.  Effects of prosthesis surface roughness on the failure process of cemented hip implants after stem-cement debonding. , 1998, Journal of biomedical materials research.

[18]  R D Crowninshield,et al.  Cemented Femoral Component Surface Finish Mechanics , 1998, Clinical orthopaedics and related research.

[19]  D. Bartel,et al.  Cemented Femoral Stem Performance: Effects of Proximal Bonding, Geometry, and Neck Length , 1998, Clinical orthopaedics and related research.

[20]  D. Howie,et al.  Effects of Design Changes on Cemented Tapered Femoral Stem Fixation , 1998, Clinical orthopaedics and related research.

[21]  W. Harris.  Long Term Results of Cemented Femoral Stems With Roughened Precoated Surfaces , 1998, Clinical orthopaedics and related research.

[22]  M. Esposito,et al.  Integration of press-fit implants in cortical bone: a study on interface kinetics. , 1998, Journal of biomedical materials research.

[23]  A. Litsky,et al.  Viscoelastic behaviour of acrylic bone cements. , 1998, Biomaterials.

[24]  A. Litsky,et al.  Effect of cement modulus on the shear properties of the bone-cement interface. , 1998, Biomaterials.

[25]  K. Kawanabe,et al.  Development of bioactive bone cement and its clinical applications. , 1998, Biomaterials.

[26]  E. Harper.  Bioactive bone cements , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[27]  A. Carmichael,et al.  Allergic contact dermatitis to bisphenol-A-glycidyldimethacrylate (BIS-GMA) dental resin associated with sensitivity to epoxy resin , 1997, British Dental Journal.

[28]  N Verdonschot,et al.  The effects of cement-stem debonding in THA on the long-term failure probability of cement. , 1997, Journal of biomechanics.

[29]  F W Werner,et al.  Tensile strength of the cement-bone interface depends on the amount of bone interdigitated with PMMA cement. , 1997, Journal of biomechanics.

[30]  T. Yamamuro,et al.  A new bioactive bone cement: its histological and mechanical characterization. , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[31]  K. Bundy,et al.  The effect of surface preparation on metal/bone cement interfacial strength. , 1987, Journal of biomedical materials research.

[32]  S D Cook,et al.  An evaluation of variables influencing implant fixation by direct bone apposition. , 1985, Journal of biomedical materials research.

[33]  M. Manley,et al.  The load carrying and fatigue properties of the stem-cement interface with smooth and porous coated femoral components. , 1985, Journal of biomedical materials research.

[34]  Reid Js,et al.  Thermally induced bone necrosis in rabbits. Relation to implant failure in humans. , 1984 .

[35]  S. Pal,et al.  Mechanical properties of bone cement: a review. , 1984, Journal of biomedical materials research.

[36]  T. Barker,et al.  Effect of metal surface topography on mechanical bonding at simulated total hip stem-cement interfaces. , 1999, Journal of biomedical materials research.

[37]  T. Bauer,et al.  The pathology of total joint arthroplasty. I. Mechanisms of implant fixation. , 1999, Skeletal radiology.

[38]  N. Sugano,et al.  Experimental studies on a new bioactive bone cement: hydroxyapatite composite resin. , 1994, Biomaterials.

[39]  W. Harris,et al.  Strength of cement-metal interfaces in fatigue: Comparison of smooth, porous and precoated specimens , 1993 .

[40]  T P Harrigan,et al.  A three-dimensional non-linear finite element study of the effect of cement-prosthesis debonding in cemented femoral total hip components. , 1991, Journal of biomechanics.