Gas foaming of segmented poly(ester amide) films

Biodegradable segmented poly(ester amide)s, based on dimethyl adipate, 1,4-butanediol and N,N?-1,2-ethanediyl-bis[6-hydroxy-hexanamide], with two distinct melting transitions were gas foamed using carbon dioxide (CO2). Polymer films were saturated with CO2 at 50 bar for 6 h after which the pressure was released. The samples were immersed in octane at the desired temperature after which foaming started immediately. Just above the lower melt transition the polymers retain adequate mechanical properties and dimensional stability, while the chain mobility increased sufficiently to nucleate and expand gas cells during the foaming process. In this way semi-crystalline poly(ester amide)s can be gas foamed below the flow temperature. Two poly(ester amide)s with 25 mol% (PEA2,5-25) and 50 mol% (PEA2,5-50) of bisamide segment content were foamed at 70 and 105 °C, respectively. The storage modulus (G?) of both pure polymers at the onset foaming temperature is 50?60 MPa. Closed-cell foams were obtained with a maximum porosity of not, vert, similar90%. The average pore size of PEA2,5-25 ranges from 77 to 99 ?m. In contrast, the average pore size of PEA2,5-50 is in between 2 and 4 ?m and can be increased to 100 ?m by lowering the CO2 saturation pressure to 20 bar. The porosity of PEA2,5-50 foams using this saturation pressure decreased to 70%

[1]  Chul B. Park,et al.  A microcellular processing study of poly(ethylene terephthalate) in the amorphous and semicrystalline states. Part I: Microcell nucleation , 1996 .

[2]  Chul B. Park,et al.  A microcellular processing study of poly(ethylene terephthalate) in the amorphous and semicrystalline states. Part II: Cell growth and process design , 1996 .

[3]  Z. Jedliński,et al.  Block/segmented polymers: 3. Biodegradability of (amide-ester)-ester copolymer - a preliminary study , 1993 .

[4]  Chul B. Park,et al.  Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers , 1996 .

[5]  Z. Jedliński,et al.  Block/segmented polymers. A new method of synthesis of copoly(amide-ester)-ester polymer , 1993 .

[6]  J. Feijen,et al.  Environmentally degradable aliphatic poly(ester-amide)s based on short, symmetrical and uniform bisamide-diol blocks, 1. Synthesis and interchange reactions , 1999 .

[7]  R Langer,et al.  Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents. , 1996, Biomaterials.

[8]  S. Gibson,et al.  The Design and Synthesis of Bioabsorbable Poly(Ester-Amides) , 1986 .

[9]  Andrew I. Cooper,et al.  Polymer synthesis and processing using supercritical carbon dioxide , 2000 .

[10]  G. Hsiue,et al.  Gas sorption in side-chain liquid crystalline polymers , 1994 .

[11]  Z. Jedliński,et al.  Block/segmented polymer: 2. Studies on the thermal and mechanical properties of poly(amide ester)-ester copolymer , 1992 .

[12]  Matthias Wessling,et al.  Microcellular Foaming of Amorphous High-Tg Polymers Using Carbon Dioxyde , 2001 .

[13]  J. Feijen,et al.  Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments , 2005 .

[14]  J. Colton.  THE NUCLEATION OF MICROCELLULAR FOAMS IN SEMI CRYSTALLINE THERMOPLASTICS , 1989 .

[15]  Chul B. Park,et al.  Processing and characterization of microcellular foamed high-density polythylene/isotactic polypropylene blends , 1998 .

[16]  Matthias Wessling,et al.  Bicontinuous Nanoporous Polymers by Carbon Dioxide Foaming , 2001 .

[17]  E. Beckman,et al.  Generation of microcellular polyurethane foams via polymerization in carbon dioxide. II: Foam formation and characterization , 1996 .

[18]  W. D. Spall,et al.  Interaction of supercritical carbon dioxide with polymers. I: Crystalline polymers , 1996 .

[19]  P. Rüegsegger,et al.  A new method for the model‐independent assessment of thickness in three‐dimensional images , 1997 .

[20]  S. Kazarian.  Polymers and supercritical fluids: opportunities for vibrational spectroscopy , 2002 .

[21]  J. Feijen,et al.  Synthesis and characterization of aliphatic poly(esteramide)s containing symmetrical bisamide blocks , 1998 .

[22]  Jonathan S. Colton,et al.  The nucleation of microcellular thermoplastic foam with additives: Part I: Theoretical considerations , 1987 .

[23]  C. Stafford,et al.  Expansion of Polystyrene Using Supercritical Carbon Dioxide: Effects of Molecular Weight, Polydispersity, and Low Molecular Weight Components , 1999 .

[24]  T. J. McCarthy,et al.  Preparation and Characterization of Microcellular Polystyrene Foams Processed in Supercritical Carbon Dioxide , 1998 .

[25]  J. D. Sudha,et al.  Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol , 2000 .

[26]  J. Feijen,et al.  Incorporation of different crystallizable amide blocks in segmented poly(ester amide)s , 2005 .

[27]  Chul B. Park,et al.  Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers , 1995 .

[28]  C. A. Smolders,et al.  Carbon dioxide foaming of glassy polymers , 1994 .

[29]  D J Mooney,et al.  Open pore biodegradable matrices formed with gas foaming. , 1998, Journal of biomedical materials research.

[30]  L. Nicolais,et al.  Polymers in Medicine II , 1987 .

[31]  R. Aseeva,et al.  Handbook of polymeric foams and foam technology. , 2004 .

[32]  Daniel F. Baldwin,et al.  The Role of Gas Dissolution and Induced Crystallization During Microcellular Polymer Processing: A Study of Poly (Ethylene Terephthalate) and Carbon Dioxide Systems , 1995 .