Numerical and experimental study of vibration mitigation for highway light poles

Highway light poles are slender structures usually characterized by low values of structural damping, a factor that can lead to large-amplitude vibration sometimes leading to collapse. This paper is motivated by a recent investigation, conducted to identify the reason for repeated failures, experienced by aluminum tapered light poles in the State of Illinois during a winter storm. The study combined numerical and experimental full-scale analysis of the structural system and its response to simulated external actions. It was observed that, despite the simple structural form, the definitive identification of the mechanism causing the oscillations was challenging due to inherent variability in the configuration as well as the paucity of environmental and response data. However, a plausible mechanism was identified, and a mitigation technique was proposed and evaluated for amplitude reduction.

[1]  J. Bendat,et al.  Random Data: Analysis and Measurement Procedures , 1987 .

[2]  Robert J. Dexter,et al.  FATIGUE-RESISTANT DESIGN OF CANTILEVERED SIGNAL, SIGN, AND LIGHT SUPPORTS , 1998 .

[3]  James R. McDonald,et al.  On galloping vibration of traffic signal structures , 1998 .

[4]  Nicholas P. Jones,et al.  Wind-Induced Failures of Highway Light Poles During Winter Storms , 2006 .

[5]  R. Blevins,et al.  Flow-Induced Vibration , 1977 .

[6]  Ahsan Kareem,et al.  Wavelet Transforms for System Identification in Civil Engineering , 2003 .

[7]  Nicholas P. Jones,et al.  Vortex shedding from circular cylinders: Experimental data and a new model , 1992 .

[8]  Ronald A. Cook,et al.  DAMPING OF CANTILEVERED TRAFFIC SIGNAL STRUCTURES , 2001 .

[9]  Sami F. Masri,et al.  General Motion of Impact Dampers , 1970 .

[10]  H. H. Mabie,et al.  Transverse vibrations of double‐tapered cantilever beams with end support and with end mass , 1974 .

[11]  Frank H. Durgin,et al.  The galloping instability of ice coated poles , 1992 .

[12]  H. W. Tieleman.  Roughness estimation for wind-load simulation experiments , 2003 .

[13]  G. Solari.  Turbulence Modeling for Gust Loading , 1987 .

[14]  G. Barnaud,et al.  High Reynolds number simulation techniques and their application to shaped structures model test , 1995 .

[15]  Giovanni Solari,et al.  3-D gust effect factor for slender vertical structures , 2002 .

[16]  W. H. Reed,et al.  Hanging-chain impact dampers - A simple method for damping tall flexible structures , 1967 .

[17]  J. D. Holmes,et al.  Verification of closed-form solutions of fatigue life under along-wind loading , 2004 .

[18]  D. J. Gorman.  Free vibration analysis of beams and shafts , 1975 .

[19]  William H. Melbourne,et al.  Chain dampers for control of wind-induced vibration of tower and mast structures , 1995 .

[20]  Giovanni Solari,et al.  Dynamic alongwind fatigue of slender vertical structures , 2001 .

[21]  Jon Wieringa,et al.  Updating the Davenport roughness classification , 1992 .

[22]  H. H. Mabie,et al.  Transverse Vibrations of Double‐Tapered Cantilever Beams , 1972 .

[23]  Giovanni Solari,et al.  GUST BUFFETING AND AEROELASTIC BEHAVIOUR OF POLES AND MONOTUBULAR TOWERS , 1999 .

[24]  W. Staszewski.  IDENTIFICATION OF DAMPING IN MDOF SYSTEMS USING TIME-SCALE DECOMPOSITION , 1997 .

[25]  William H. Melbourne,et al.  Predicting the cross-wind response of masts and structural members , 1997 .

[26]  Ahsan Kareem,et al.  On the formulation of ASCE7-95 gust effect factor , 1998 .