Surface Chemistry of LiFePO4 Studied by Mössbauer and X-Ray Photoelectron Spectroscopy and Its Effect on Electrochemical Properties

LiFePO 4 is a promising cathode material for lithium-ion batteries despite its low intrinsic electronic conductivity. We show, using a combination of Mossbauer, X-ray diffraction, and X-ray photoelectron spectroscopy (XPS), that conductive metal phosphides which enhance its electrochemical performance (FeP, and metallic Fe 2 P), are generated on the surface of the parent LiFePO 4 by reaction with in situ carbon from iron citrate and reducing gases such as hydrogen. Their relative fraction, nature, and location was quantified. Under the most mild reducing conditions, nanosized FeP is formed on the surface along with Li 3 PO 4 , and carbon resulting from the precursor. Under more aggressive reducing conditions, FeP is still present, but thermodynamics now favor the formation of Fe 2 P, with fractions varying from 4 to 18 wt % depending on the temperature and atmosphere used for treatment. Both large (0.5 μm) crystallites, and amorphous or nanodimensioned particles are present. XPS studies reveal that the amorphous or nanodimensioned Fe 2 P lies on the inner surface adjacent to the LiFePO 4 , and the residual carbon lies on the outer surface. The resulting LiFePO 4 "composites" show significantly enhanced electrochemical rate properties as well as outstanding cyclability, which allows a high discharge capacity of ∼ 105 mAh g -1 at a 14.8C rate (2500 mA g -1 ).

[1]  Robert Dominko,et al.  Porous, carbon-decorated LiFePO4 prepared by sol–gel method based on citric acid , 2005 .

[2]  Brian H. Toby,et al.  EXPGUI, a graphical user interface for GSAS , 2001 .

[3]  M. Armand,et al.  Surface chemistry of carbon-treated LiFePO4 particles for Li-ion battery cathodes studied by PES , 2003 .

[4]  S. Djoumaliisky,et al.  Modification of blowing agent system based on sodium bicarbonate with activated natural zeolite , 1998 .

[5]  Fujii Hironobu,et al.  Magnetic Properties of Fe2P Single Crystal , 1977 .

[6]  Richard T. Haasch,et al.  Surface Characterization of Electrodes from High Power Lithium-Ion Batteries , 2002 .

[7]  R. Bailey,et al.  Moessbauer and nuclear magnetic resonance studies of several iron phosphides , 1967 .

[8]  L. Nazar,et al.  X-ray/Neutron Diffraction and Electrochemical Studies of Lithium De/Re-Intercalation in Li1-xCo1/3Ni1/3Mn1/3O2 (x = 0 → 1) , 2006 .

[9]  Guoxiu Wang,et al.  Investigation of Fe valence in LiFePO4 by Mössbauer and XANES spectroscopic techniques , 2004 .

[10]  Sai-Cheong Chung,et al.  Optimized LiFePO4 for Lithium Battery Cathodes , 2001 .

[11]  J. Dahn,et al.  Reducing Carbon in LiFePO4 / C Composite Electrodes to Maximize Specific Energy, Volumetric Energy, and Tap Density , 2002 .

[12]  Seong-Woo Kim,et al.  Growth of gas bubbles in the foam extrusion process , 2000 .

[13]  Jan L. Allen,et al.  Ni3+/Ni2+ redox potential in LiNiPO4 , 2005 .

[14]  T. Barr.  Recent advances in x‐ray photoelectron spectroscopy studies of oxides , 1991 .

[15]  L. Häggström,et al.  Mössbauer study of the magnetic structure of FeP , 1982 .

[16]  Sun-Yuan Tsay,et al.  Synthesis and characterization of nano-sized LiFePO4 cathode materials prepared by a citric acid-based sol–gel route , 2004 .

[17]  T. Kistenmacher,et al.  Local atomic structure in amorphous Fe‐P alloys , 1988 .

[18]  N. McIntyre,et al.  X-ray photoelectron spectroscopic studies of iron oxides , 1977 .

[19]  Pierre Layrolle,et al.  Synthesis of macroporous hydroxyapatite scaffolds for bone tissue engineering. , 2002, Journal of biomedical materials research.

[20]  M. Whittingham,et al.  Some transition metal (oxy)phosphates and vanadium oxides for lithium batteries , 2005 .

[21]  Linda F. Nazar,et al.  Approaching Theoretical Capacity of LiFePO4 at Room Temperature at High Rates , 2001 .

[22]  C. Jørgensen,et al.  Relative photoelectron signal intensities obtained with a magnesium x-ray source , 1975 .

[23]  Nathalie Ravet,et al.  Electroactivity of natural and synthetic triphylite , 2001 .

[24]  Y. Chiang,et al.  Microscale Measurements of the Electrical Conductivity of Doped LiFePO4 , 2003 .

[25]  J. A. Taylor,et al.  Empirical atomic sensitivity factors for quantitative analysis by electron spectroscopy for chemical analysis , 1981 .

[26]  L. Nazar,et al.  Nano-network electronic conduction in iron and nickel olivine phosphates , 2004, Nature materials.

[27]  John O. Thomas,et al.  Thermal stability of LiFePO4-based cathodes , 1999 .

[28]  Victor V. Atuchin,et al.  Study of KTiOPO4 surface by x‐ray photoelectron spectroscopy and reflection high‐energy electron diffraction , 2002 .

[29]  D. Aurbach,et al.  X-ray photoelectron spectroscopy studies of lithium surfaces prepared in several important electrolyte solutions. A comparison with previous studies by Fourier transform infrared spectroscopy , 1996 .

[30]  L. Nazar,et al.  Nanostructured materials for lithium-ion batteries: surface conductivity vs. bulk ion/electron transport. , 2007, Faraday discussions.

[31]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[32]  J. Nowacki.  Nucleation, growth and properties of thin layers of iron phosphides , 2002 .

[33]  K. L. Tan,et al.  Argon incorporation and surface compositional changes in InP(100) due to low‐energy Ar+ ion bombardment , 1996 .

[34]  L. Häggström,et al.  Mössbauer study of phosphides containing iron , 1971 .

[35]  Dane Morgan,et al.  Li Conductivity in Li x MPO 4 ( M = Mn , Fe , Co , Ni ) Olivine Materials , 2004 .

[36]  K. Kanamura,et al.  Study of the Surface Composition of Highly Smooth Lithium Deposited in Various Carbonate Electrolytes Containing HF , 1997 .