Additive manufacturing of metallic cellular materials via three-dimensional printing

[1]  Christopher Bryant Williams,et al.  Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure , 2008 .

[2]  Howard P. Hodson,et al.  Cross flow heat exchange of textile cellular metal core sandwich panels , 2007 .

[3]  J. Kruth,et al.  Feedback control of selective laser melting , 2007 .

[4]  Christopher B. Williams,et al.  Manufacturing Cellular Materials Via Three-Dimensional Printing of Spray-dried Metal Oxide Ceramic Powder , 2007 .

[5]  B. Stucker,et al.  Maximum Height to Width Ratio of Freestanding Structures Built using Ultrasonic Consolidation , 2006 .

[6]  David W. Rosen,et al.  Design of a Graded Cellular Structure For an Acetabular Hip Replacement Component , 2006 .

[7]  D. Cormier,et al.  An Evaluation of Non-Stochastic Lattice Structures Fabricated Via Electron Beam Melting , 2006 .

[8]  Christopher B. Williams,et al.  Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure , 2005 .

[9]  John W. Halloran,et al.  Freeform Fabrication of Ceramics via Stereolithography , 2005 .

[10]  Christopher J. Sutcliffe,et al.  Rapid design and manufacture of ultra light cellular materials , 2005 .

[11]  Farrokh Mistree,et al.  INVESTIGATION OF SOLID FREEFORM FABRICATION PROCESSES FOR THE MANUFACTURE OF PARTS WITH DESIGNED MESOSTRUCTURE , 2005 .

[12]  J. Lewis.  Colloidal Processing of Ceramics , 2004 .

[13]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[14]  Ola L. A. Harrysson,et al.  Characterization of H13 steel produced via electron beam melting , 2004 .

[15]  Farrokh Mistree,et al.  Multifunctional design of prismatic cellular materials , 2004 .

[16]  Norman A. Fleck,et al.  Fabrication and structural performance of periodic cellular metal sandwich structures , 2003 .

[17]  John Evans,et al.  Extrusion freeforming of ceramics through fine nozzles , 2003 .

[18]  Stefan Simeonov Dimov,et al.  Layer manufacturing processes: technology advances and research challenges , 2003 .

[19]  H. Wadley.  Cellular Metals Manufacturing , 2002 .

[20]  Haydn N. G. Wadley,et al.  Cellular Metal Truss Core Sandwich Structures , 2002 .

[21]  John Banhart,et al.  On the Road Again: Metal Foams Find Favor , 2002 .

[22]  Stefanie Chiras,et al.  The structural performance of near-optimized truss core panels , 2002 .

[23]  Hongqing Vincent Wang,et al.  Computer-aided design methods for the additive fabrication of truss structure , 2001 .

[24]  Brian Derby,et al.  Ink-Jet Printing of Wax-Based Alumina Suspensions , 2001 .

[25]  M. Ashby,et al.  The topological design of multifunctional cellular metals , 2001 .

[26]  J. Banhart.  Manufacturing routes for metallic foams , 2000 .

[27]  P. Mendez,et al.  Metal solid freeform fabrication using semi-solid slurries , 2000 .

[28]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[29]  J. Evans,et al.  Ceramic Deposition using an Electromagnetic Jet Printer Station , 1999 .

[30]  Amit Bandyopadhyay,et al.  Processing, Characterization and Modeling of Non-Random Porous Ceramic Structures , 1999 .

[31]  Alejandro Carrión,et al.  Technology forecast on ink‐jet head technology applications in rapid prototyping , 1997 .

[32]  Noshir A. Langrana,et al.  Structural quality of parts processed by fused deposition , 1996 .

[33]  J. S. Reed,et al.  Principles of ceramics processing , 1995 .

[34]  Emanuel M. Sachs,et al.  Three-Dimensional Printing: The Physics and Implications of Additive Manufacturing , 1993 .

[35]  Michael J. Cima,et al.  Structural Ceramic Components by 3D Printing , 1993 .

[36]  Michael J. Cima,et al.  Microstructural Elements of Components Derived from 3D Printing , 1992 .