A traveling-wave thermoacoustic electric generator with a variable electric R-C load

A traveling-wave thermoacoustic electric generator, which is composed of a traveling wave thermoacoustic engine and linear alternators, is promising in solar power generation and energy recovery due to its high efficiency, high reliability, and capability of utilizing low-grade heat. An equivalent acoustic circuit of a linear alternator is first built and analyzed using electro–mechano-acoustical analogy. It is found that the acoustic coupling of the linear alternators to the traveling-wave thermoacoustic engine is crucial to the performance of the system. A traveling-wave thermoacoustic electric generator with a variable electric R-C load is then constructed and experimentally studied. Both the theoretical analysis and the experimental results show the importance of mechanical and electrical resonances to the overall performance of the system. Furthermore, the thermal-to-electric efficiency and the electric power are found to be proportional to the pressure amplitude and the square of it in front of the piston of the linear alternator, respectively. By optimizing the load impedance, the traveling-wave thermoacoustic electric generator has achieved a maximum electric power of 345.3W with a thermal-to-electric efficiency of 9.34% and a maximum efficiency of 12.33% with an electric power of 321.8W at around 65Hz when helium of 3.0MPa is used as the working gas.

[1]  Salvatore M. Oriti,et al.  Recent Stirling Conversion Technology Developments and Operational Measurements , 2009 .

[2]  Scott Backhaus,et al.  Design and Testing of a Thermal to Electric Power Converter Based on Thermoacoustic Technology , 2004 .

[3]  Xiaotao Wang,et al.  Study on energy conversion characteristics of a high frequency standing-wave thermoacoustic heat engine , 2013 .

[4]  Ercang Luo,et al.  Development of a 3 kW double-acting thermoacoustic Stirling electric generator , 2014 .

[5]  A. Piccolo,et al.  Optimization of thermoacoustic refrigerators using second law analysis , 2013 .

[6]  Zhanghua Wu,et al.  A solar-powered traveling-wave thermoacoustic electricity generator , 2012 .

[7]  Gregory W. Swift,et al.  DESIGN ENVIRONMENT FOR LOW-AMPLITUDE THERMOACOUSTIC ENGINES , 1994 .

[8]  Ercang Luo,et al.  Experimental investigation of a 500 W traveling-wave thermoacoustic electricity generator , 2011 .

[9]  Scott Backhaus,et al.  Travelling-wave thermoacoustic electricity generator using an ultra-compliant alternator for utilization of low-grade thermal energy , 2012 .

[10]  E. Tward,et al.  High Performance Flight Cryocooler Compressor , 2002 .

[11]  G. Swift,et al.  A thermoacoustic Stirling heat engine , 1999, Nature.

[12]  G. Swift,et al.  A thermoacoustic-Stirling heat engine: detailed study , 2000, The Journal of the Acoustical Society of America.

[13]  Ercang Luo,et al.  Investigation on a 1kW traveling-wave thermoacoustic electrical generator , 2014 .

[14]  Daming Sun,et al.  Numerical simulation of the onset characteristics in a standing wave thermoacoustic engine based on thermodynamic analysis , 2012 .

[15]  Duanyong Li,et al.  Thermodynamic performance on a thermo-acoustic micro-cycle under the condition of weak gas degeneracy , 2009 .

[16]  Terrence W. Simon,et al.  6th International Energy Conversion Engineering Conference, IECEC , 2008 .

[17]  Scott Backhaus,et al.  A low-cost electricity generator for rural areas using a travelling-wave looped-tube thermoacoustic engine , 2010 .

[18]  Zhihua Gan,et al.  Investigation on a thermoacoustically driven pulse tube cooler working at 80 K , 2005 .

[19]  S. Spoelstra,et al.  A high performance thermoacoustic engine , 2011 .

[20]  Guobang Chen,et al.  Investigation on traveling wave thermoacoustic heat engine with high pressure amplitude , 2005 .

[21]  Scott Backhaus,et al.  Traveling-wave thermoacoustic electric generator , 2004 .