In cooperation with the fire protection engineering community, a computational fire model, Fire Dynamics Simulator (FDS), is being developed at NIST to study fire behavior and to evaluate the performance of fire protection systems in buildings. The software was released into the public domain in 2000, and since then has been used for a wide variety of analyses by fire protection engineers. An on-going need is to develop and validate new sub-models. Fire experiments are conducted for a variety of reasons, and model predictions of these experiments over the past few decades have gradually improved. However, as the models become more detailed, so must the measurements. The bulk of available large scale test data consist of temperature (thermocouple) measurements made at various points above a fire or throughout an enclosure. While it is useful to compare model predictions with these measurements, one can only gauge how closely the model reproduces the given data. There is often no way to infer why the model and experiment disagree, and thus no way to improve the model. Also, it is difficult to separate various physical phenomena in a large scale fire test so that combustion, radiation and heat transfer algorithms can be evaluated independently. For example, the heat release rate of the fire governs the rate at which energy is added to the system, convective and radiative transport distribute the energy throughout, and thermal conduction drains the system of some of the energy. The measured value of a temperature, heat flux, or gas concentration at any one point depends on all the physical processes, and uncertainties in each phase of the calculation tend to combine in a non-linear way impacting the prediction.Copyright © 2003 by ASME