Design and development of a low-cost divided bar apparatus

A divided-bar apparatus is deemed to be the most accurate method of measuring the thermal conductivity, λ (W/mK), of intact rock cores in the laboratory. The divided bar is a steady-state comparative method in which the temperature drop across a disk of rock is compared with that across a disk of standard material of known conductivity. Thermal conductivity test results obtained from rock cores can be used in software programs to determine the design requirements for any medium to large-scale ground-source energy system. This paper describes the design and development of a low-cost divided-bar apparatus and compares the values obtained to those achieved by previous researchers and those recommended by EED, a commonly used borehole heat exchanger design software program. The divided bar was designed in accordance with the following principles: keep construction costs low by using readily available materials, develop a simplistic operating procedure to promote continuity of use and cater for the testing of different sized rock cores. As there are currently no recognized testing standards available for operation of a divided-bar apparatus, the sample preparation procedure for samples tested on the UCD divided-bar apparatus was developed as a proposed standard testing procedure. The proposed procedure amalgamates the developments and suggestions of previous researchers in addition to published test procedures in Ulusay and Hudson [Ulusay, R. and Hudson, J. A., 2007, The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974–2006, ISRM Turkey], and could possibly contribute toward the development of a standardized procedure for testing on a divided-bar apparatus. The test results presented in this paper demonstrate a strong relationship between thermal conductivity and mineral composition with the effects of porosity also having a notable influence on the thermal conductivity of the tested rocks.

[1]  James G. Berryman,et al.  Thermal conductivity of porous media , 2004 .

[2]  J. Konrad,et al.  A generalized thermal conductivity model for soils and construction materials , 2005 .

[3]  H. Clark,et al.  The thermal conductivity of rocks and its dependence upon temperature and composition; Part II , 1940 .

[4]  Colin F. Williams,et al.  Characterization of rock thermal conductivity by high-resolution optical scanning , 1999 .

[5]  Gene Simmons,et al.  Thermal conductivity of rock-forming minerals☆ , 1969 .

[6]  Michael Long,et al.  Design and development of a low-cost thermal response rig , 2012 .

[7]  Ramazan Demirboga,et al.  Thermal conductivity of limestone from Gaziantep (Turkey) , 2007 .

[8]  Colin Barker,et al.  Thermal modeling of petroleum generation : theory and applications , 1996 .

[9]  Christoph Clauser,et al.  Thermal conductivity from core and well log data , 2005, 0806.2399.

[10]  Robert C. Weast,et al.  Handbook of chemistry and physics : a readyreference book of chemical and physical data , 1972 .

[11]  W. Woodside,et al.  Thermal Conductivity of Porous Media. II. Consolidated Rocks , 1961 .

[12]  CôtéJean,et al.  Thermal conductivity of bitumen concrete , 2013 .

[13]  M.Q.W. Jones.  Thermal properties of stratified rocks from witwatersrand gold mining areas , 2003 .

[14]  E. C. Robertson.  THERMAL PROPERTIES OF ROCKS , 1988 .

[15]  Michael Long,et al.  Interpretation of In Situ and Laboratory Thermal Measurements Resulting in Accurate Thermogeological Characterisation , 2012 .

[16]  Earl E. Davis,et al.  45. DATA REPORT: PHYSICAL PROPERTIES OF MASSIVE SULFIDE FROM SITE 856, MIDDLE VALLEY, NORTHERN JUAN DE FUCA RIDGE1 , 1994 .

[17]  Nenad Milosevic,et al.  Correction on the influence of thermal contact resistance in thermal conductivity measurements using the guarded hot plate method , 2009 .

[18]  Won-Jin Cho,et al.  The thermal conductivity for granite with various water contents , 2009 .

[19]  J. Tester,et al.  Thermal Conductivity of Rocks Associated with Energy Extraction from Hot Dry Rock Geothermal Systems , 1978 .

[20]  Darius Mottaghy,et al.  Prediction of Thermal Properties for Mesozoic Rocks of Southern Germany , 2007 .

[21]  E. R. Niblett,et al.  Terrestrial Heat Flow in the Swiss Alps , 1956 .

[22]  Graeme Beardsmore,et al.  Crustal heat flow : a guide to measurement and modelling , 2001 .

[23]  J. Konrad,et al.  Thermal conductivity of base-course materials , 2005 .

[24]  D. Issler,et al.  Thermal conductivity analysis of Cenozoic, Mesozoic and Paleozoic core samples, Beaufort-Mackenzie Basin, northern Canada , 2011 .

[25]  Allen W. Hatheway,et al.  The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring; 1974–2006 , 2009 .