Si pillar structured thermal neutron detectors: fabrication challenges and performance expectations

Solid-state thermal neutron detectors are desired to replace 3He tube tube-based technology for the detection of special nuclear materials. 3He tubes have some issues with stability, sensitivity to microphonics and very recently, a shortage of 3He. There are numerous solid-state approaches being investigated that utilize various architectures and material combinations. Our approach is based on the combination of high-aspect-ratio silicon PIN pillars, which are 2 μm wide with a 2 μm separation, arranged in a square matrix, and surrounded by 10B, the neutron converter material. To date, our highest efficiency is ~ 20 % for a pillar height of 26 μm. An efficiency of greater than 50 % is predicted for our device, while maintaining high gamma rejection and low power operation once adequate device scaling is carried out. Estimated required pillar height to meet this goal is ~ 50 μm. The fabrication challenges related to 10B deposition and etching as well as planarization of the three-dimensional structure is discussed.

[1]  J. I. Brand,et al.  A Handheld Neutron-Detection Sensor System Utilizing a New Class of Boron Carbide Diode , 2006, IEEE Sensors Journal.

[2]  Lorenzo Fabris,et al.  A fast, compact solution for low noise charge preamplifiers , 1998 .

[3]  Richard M. Osgood,et al.  Efficient Si solar cells by laser photochemical doping , 1981 .

[4]  K. M. Subhedar,et al.  Synthesis of MgB2 films by diffusion of magnesium into electrophoretically deposited boron films , 2006 .

[5]  Miyako Ohkubo,et al.  Preparation and properties of boron thin films , 1997 .

[6]  C. C. Klepper,et al.  Energetic deposition of B10 on high aspect ratio trenches for neutron detectors , 2009 .

[7]  Othon R. Monteiro,et al.  Nucleation and growth of CVD diamond films on patterned substrates , 2003 .

[8]  J. Yates,et al.  The thermal dissociation of decaborane on Si(111)‐(7×7) and doping effects in the near surface region , 1992 .

[9]  Douglas S. McGregor,et al.  Thin-film-coated bulk GaAs detectors for thermal and fast neutron measurements , 2001 .

[10]  Atsuo Hanami,et al.  High Speed Cleaning of Boronized Wall with a CF4 Containing Plasma , 1991 .

[11]  Hirotaka Toyoda,et al.  In-situ boron coating and its removal by glow discharge processes , 1989 .

[12]  A. Rose,et al.  Sputtered boron films on silicon surface barrier detectors , 1967 .

[13]  Peter A. Dowben,et al.  Chemical vapor deposition of boron and boron nitride from decaborane(14) , 1989 .

[14]  Rebecca J. Nikolic,et al.  Planarization of high aspect ratio p-i-n diode pillar arrays for blanket electrical contacts , 2009 .

[15]  Yaron Danon,et al.  Deposition and Etching of Conformal Boron Films for Neutron Detector Applications , 2011 .

[16]  R. J. Nikolic,et al.  Roadmap for high efficiency solid-state neutron detectors , 2005, SPIE Optics East.

[17]  J. Shultis,et al.  Efficiencies of coated and perforated semiconductor neutron detectors , 2004, IEEE Transactions on Nuclear Science.

[18]  D.S. McGregor,et al.  New surface morphology for low stress thin-film-coated thermal neutron detectors , 2001 .

[19]  A.M. Conway,et al.  Numerical simulations of carrier transport in pillar structured solid state thermal neutron detector , 2007, 2007 International Semiconductor Device Research Symposium.

[20]  T. F. Wang,et al.  Nine element Si-based pillar structured thermal neutron detector , 2010, Optical Engineering + Applications.

[21]  J. K. Shultis,et al.  Design and performance considerations for perforated semiconductor thermal-neutron detectors , 2009 .

[22]  N. Deo,et al.  Numerical Simulations of Pillar Structured Solid State Thermal Neutron Detector: Efficiency and Gamma Discrimination , 2008, IEEE Transactions on Nuclear Science.

[23]  Hiroshi Komiyama,et al.  Conformal deposition of WSix films on micron-sized trenches : the reactivity of film precursors , 1992 .

[24]  Atsuo Hanami,et al.  Rapid Cleaning of Boronized Walls with a Chlorine/Hydrogen Glow Discharge , 1990 .

[25]  N. Deo,et al.  Etching of 10Boron with SF6-based Electron Cyclotron Resonance Plasmas for Pillar-Structured Thermal Neutron Detectors , 2010 .

[26]  N. Deo,et al.  Pillar structured thermal neutron detector , 2008, 2008 9th International Conference on Solid-State and Integrated-Circuit Technology.

[27]  Rebecca J. Nikolic,et al.  Comparison of CF4 and SF6 based plasmas for ECR etching of isotopically enriched 10boron films , 2009 .

[28]  Hiroshi Ohnishi,et al.  Conformal deposition on a deep-trenched substrate by MOCVD , 1993 .

[29]  C. E. Reinhardt,et al.  Leakage current quenching and lifetime enhancement in 3D pillar structured silicon PIN diodes , 2009, 2009 International Semiconductor Device Research Symposium.

[30]  Rebecca J. Nikolic,et al.  Conformal filling of silicon micropillar platform with b10oron , 2008 .

[31]  K. Seshan,et al.  Handbook of Thin Film Deposition Processes and Techniques: Principles, Methods, Equipment and Applications , 2001 .