Vibro-acoustic optimisation of sandwich panels using the wave/finite element method

Abstract This paper investigates the use of a wave-based method in the framework of structural optimisation of composite panels involving advanced components. The wave/finite element method (WFEM) is used to evaluate the influence of a core’s geometry on the transition frequency of a sandwich panel involving composite skins. This transition occurs is a sandwich panel when the transverse shear stiffness has a significant influence on the flexural motion, compared to the bending stiffness. It follows that the modal density and the acoustic radiation will considerably increase above this frequency. The periodic waveguide is modelled at the mesoscopic scale using a 3D finite element model of the unit-cell. Therefore this method does not require an homogenisation of the core based on Gibson and Ashby formulations to provide the wave dispersion characteristics. Although the cellular cores compared in this study share the same mass-to-stiffness ratio, a significant alteration of the transition frequency and modal density can be observed compared to honeycomb cores. A periodic octagonal core is designed, providing up to 70% increase of the transition frequency and a significant reduction of the modal density.

[1]  P. S. Nair,et al.  MODAL DENSITY OF COMPOSITE HONEYCOMB SANDWICH PANELS , 1996 .

[2]  Mohamed Ichchou,et al.  A hybrid wave-mode formulation for the vibro-acoustic analysis of 2D periodic structures , 2016 .

[3]  F. Bloch.  Über die Quantenmechanik der Elektronen in Kristallgittern , 1929 .

[4]  Marco Montemurro,et al.  A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part II: the optimisation strategy , 2014 .

[5]  Leping Feng,et al.  Reduction of the sound transmission of a periodic sandwich plate using the stop band concept , 2015 .

[6]  Noureddine Atalla,et al.  Modeling thick composite laminate and sandwich structures with linear viscoelastic damping , 2011 .

[7]  M. Brennan,et al.  Finite element prediction of wave motion in structural waveguides. , 2005, The Journal of the Acoustical Society of America.

[8]  J. P. D. Wilkinson,et al.  Modal Densities of Certain Shallow Structural Elements , 1968 .

[9]  Massimo Ruzzene,et al.  Multiscale finite element analysis of wave propagation in periodic solids , 2016 .

[10]  T. A. Venkatesh,et al.  Low frequency acoustic characteristics of periodic honeycomb cellular cores: The effect of relative density and strain fields , 2015 .

[11]  L. L. Erickson.  Modal densities of sandwich panels - Theory and experiment , 1969 .

[12]  J. Lainé,et al.  Multi-scale modelling for two-dimensional periodic structures using a combined mode/wave based approach , 2015 .

[13]  Mohamed Ichchou,et al.  A reduced formulation for the free-wave propagation analysis in composite structures , 2014 .

[14]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[15]  Robin S. Langley,et al.  The modal density and mode count of thin cylinders and curved panels , 1994 .

[16]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[17]  Mohamed Ichchou,et al.  Multi-mode propagation and diffusion in structures through finite elements , 2005 .

[19]  F. Fahy,et al.  Rayonnement acoustique des structures: Vibroacoustique, interactions fluide-structure: 1988, by Claude Lesueur (principal author and editor). Paris: Editions Eyrolles. 591 pp., Price 580 FF. , 1989 .

[20]  B. Watters,et al.  New Wall Design for High Transmission Loss or High Damping , 1959 .

[21]  Laurent Guillaumie,et al.  Vibroacoustic flexural properties of symmetric honeycomb sandwich panels with composite faces , 2015 .