An Experimental Investigation on the Effect of Ferrofluids on the Efficiency of Novel Parabolic Trough Solar Collector Under Laminar Flow Conditions

ABSTRACT The paper is related to the use of magnetic nanofluids (ferrofluids) in a direct absorption solar parabolic trough collector, which enhances thermal efficiency compared to conventional solar collectors. By applying the right magnetic intensity and magnetic field direction, the thermal conductivity of the fluid increased higher than typical nanofluids. Moreover, the ferrofluids exhibit excellent optical properties. The external magnetic source is installed to alter the thermo-physical properties of the fluid, and the absorber tube does not have selective surface allowing ferrofluids to absorb the incoming solar irradiance directly. In this paper, an experimental investigation of the performance of small scale direct absorption solar collector using ferrofluids as an absorber was conducted. Nanoparticle concentrations of 0.05 vol% at the operational temperatures between 19°C and 40°C were used in the current study. The results show that using ferrofluids as a heat transfer fluid increases the efficiency of solar collectors. In the presence of the external magnetic field, the solar collector efficiency increases to the maximum, 25% higher than the conventional parabolic trough. At higher temperatures, the ferrofluids show much better efficiency than conventional heat transfer fluid. The study indicated that nanofluids, even of low-content, have good absorption of solar radiation, and can improve the outlet temperatures and system efficiencies. The study shows the potential of using ferrofluids in the direct absorption solar collector.

[1]  D. Kearney,et al.  Test results: SEGS LS-2 solar collector , 1994 .

[2]  G. C. Bakos,et al.  Design, optimisation and conversion-efficiency determination of a line-focus parabolic-trough solar-collector (PTC) , 2001 .

[3]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[4]  Sarit K. Das,et al.  Heat Transfer in Nanofluids—A Review , 2006 .

[5]  B. Raj,et al.  Enhancement of thermal conductivity in magnetite based nanofluid due to chainlike structures , 2007 .

[6]  Wenhua Yu,et al.  Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements , 2008 .

[7]  Baldev Raj,et al.  Evidence for enhanced thermal conduction through percolating structures in nanofluids , 2008, Nanotechnology.

[8]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[9]  K. R. Kumar,et al.  Thermal analysis of solar parabolic trough with porous disc receiver , 2009 .

[10]  Javier Muñoz Antón,et al.  Analysis of internal helically finned tubes for parabolic trough design by CFD tools , 2011 .

[11]  Robert A. Taylor,et al.  Applicability of nanofluids in high flux solar collectors , 2011 .

[12]  M. M. Rahman,et al.  Heat transfer analysis of parabolic trough solar receiver , 2011 .

[13]  W. Marsden.  I and J , 2012 .

[14]  Yangyang He,et al.  Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers , 2012 .

[15]  F. S. Javadi,et al.  Investigating performance improvement of solar collectors by using nanofluids , 2013 .

[16]  Yanmin Wang,et al.  Effect of chain-like magnetite nanoparticle aggregates on thermal conductivity of magnetic nanofluid in magnetic field , 2013 .

[17]  Gianpiero Colangelo,et al.  A new solution for reduced sedimentation flat panel solar thermal collector using nanofluids , 2013 .

[18]  Mahmoud Shatat,et al.  A standardized Empirical Method of Testing Solar Simulator Coupled with Solar Tube and Concentrator Collectors , 2013 .

[19]  M. Berenguel,et al.  Thermo-economic design optimization of parabolic trough solar plants for industrial process heat applications with memetic algorithms , 2014 .

[20]  Nathan Hordy,et al.  High temperature and long-term stability of carbon nanotube nanofluids for direct absorption solar thermal collectors , 2014 .

[21]  Jim Euchner.  Design , 2014, Catalysis from A to Z.

[22]  Alibakhsh Kasaeian,et al.  Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid , 2014 .

[23]  Zhengguo Zhang,et al.  Radiative properties of ionic liquid-based nanofluids for medium-to-high-temperature direct absorption solar collectors , 2014 .

[24]  Gianluca Coccia,et al.  Design, manufacture, and test of a prototype for a parabolic trough collector for industrial process heat , 2015 .

[25]  Gianpiero Colangelo,et al.  Review of heat transfer in nanofluids: Conductive, convective and radiative experimental results , 2015 .

[26]  R. Boukhanouf,et al.  Thermo-physical properties and thermo-magnetic convection of ferrofluid , 2015 .

[27]  Gianpiero Colangelo,et al.  Experimental test of an innovative high concentration nanofluid solar collector , 2015 .

[28]  Josua P. Meyer,et al.  Thermodynamic optimisation of the performance of a parabolic trough receiver using synthetic oil–Al2O3 nanofluid , 2015 .

[29]  Yulong Ding,et al.  Experimental study on the heat transfer characteristics of a low melting point salt in a parabolic trough solar collector system , 2015 .

[30]  G. M. Joselin Herbert,et al.  A review of solar parabolic trough collector , 2016 .

[31]  Mohd Zulkifly Abdullah,et al.  Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applications , 2016 .

[32]  Jiankai Dong,et al.  An experimental investigation on a small-sized parabolic trough solar collector for water heating in cold areas , 2016 .

[33]  Wang Fuqiang,et al.  Parabolic trough receiver with corrugated tube for improving heat transfer and thermal deformation characteristics , 2016 .

[34]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[35]  Tsuyoshi Murata,et al.  {m , 1934, ACML.