A Unified Control Framework for Traction Machine Drive Using Linear Parameters Varying-Based Field-Oriented Control

[1]  Aamer I. Bhatti,et al.  Managing Thermally Derated Torque of an Electrified Powertrain Through LPV Control , 2018, IEEE/ASME Transactions on Mechatronics.

[2]  D. Gerling,et al.  On the effects of high-temperature-induced aging on electrical machine windings , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[3]  Gang Xu,et al.  Simultaneous Optimization for Hybrid Electric Vehicle Parameters Based on Multi-Objective Genetic Algorithms , 2011 .

[4]  Giorgio Rizzoni,et al.  Fault Diagnosis for Electric Drive Systems of Electrified Vehicles Based on Structural Analysis , 2017, IEEE Transactions on Vehicular Technology.

[5]  Alexander G. Loukianov,et al.  Copper and Core Loss Minimization for Induction Motors Using High-Order Sliding-Mode Control , 2012, IEEE Transactions on Industrial Electronics.

[6]  P. Gnaciński.  Windings Temperature and Loss of Life of an Induction Machine Under Voltage Unbalance Combined With Over- or Undervoltages , 2008, IEEE Transactions on Energy Conversion.

[7]  Marco Amrhein,et al.  Dynamic simulation for analysis of hybrid electric vehicle system and subsystem interactions, including power electronics , 2005, IEEE Transactions on Vehicular Technology.

[8]  Longya Xu,et al.  Alternative Energy Vehicles Drive System: Control, Flux and Torque Estimation, and Efficiency Optimization , 2011, IEEE Transactions on Vehicular Technology.

[9]  P. Pillay,et al.  Loss of Life in Induction Machines Operating With Unbalanced Supplies , 2006, IEEE Transactions on Energy Conversion.

[10]  Jose Rizalino M. Delos Reyes,et al.  Winter Happens: The Effect of Ambient Temperature on the Travel Range of Electric Vehicles , 2016, IEEE Transactions on Vehicular Technology.

[11]  Aamer I. Bhatti,et al.  Compensating the Performance and Loss of Life of an Induction Machine based Electrified Powertrain using Robust LPV Controller , 2018, 2018 Annual American Control Conference (ACC).

[12]  Mehdi Farasat,et al.  Efficiency improved sensorless control scheme for electric vehicle induction motors , 2014 .

[13]  Guoming Zhu,et al.  LPV gain-scheduling control of an electronic throttle with experimental validation , 2014, 2014 American Control Conference.

[14]  K. Hameyer,et al.  Life expectancy calculation for electric vehicle traction motors regarding dynamic temperature and driving cycles , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[15]  Zhi Yang,et al.  Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV Applications , 2015, IEEE Transactions on Transportation Electrification.

[16]  Kaushik Rajashekara,et al.  Comprehensive Efficiency Modeling of Electric Traction Motor Drives for Hybrid Electric Vehicle Propulsion Applications , 2007, IEEE Transactions on Vehicular Technology.

[17]  Ian Postlethwaite,et al.  A linear parameter variant H∞ control design for an induction motor , 2002 .

[18]  Jiabin Wang,et al.  A Computationally Efficient Design Technique for Electric-Vehicle Traction Machines , 2014 .

[19]  J. Doyle,et al.  Robust and optimal control , 1995, Proceedings of 35th IEEE Conference on Decision and Control.

[20]  Giorgio Rizzoni,et al.  Genetic algorithms optimized multi-objective controller for an induction machine based electrified powertrain , 2017, 2017 IEEE Conference on Control Technology and Applications (CCTA).

[21]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[22]  Philip T. Krein,et al.  Evaluation of Induction and Permanent-Magnet Synchronous Machines Using Drive-Cycle Energy and Loss Minimization in Traction Applications , 2014, IEEE Transactions on Industry Applications.

[23]  Aamer I. Bhatti,et al.  Estimation of thermally de-rated torque of an HEV drive using robust LPV observer , 2016, 2016 American Control Conference (ACC).

[24]  Vadim I. Utkin,et al.  Sliding mode control in electromechanical systems , 1999 .

[25]  Abdelaziz Kheloui,et al.  Virtual-Sensor-Based Maximum-Likelihood Voting Approach for Fault-Tolerant Control of Electric Vehicle Powertrains , 2013, IEEE Transactions on Vehicular Technology.

[26]  Charles Poussot-Vassal,et al.  A new semi-active suspension control strategy through LPV technique , 2008 .

[27]  Zhe Huang,et al.  Modeling and Testing of Insulation Degradation due to Dynamic Thermal Loading of Electrical Machines , 2017 .

[28]  A. Emadi,et al.  Comprehensive drive train efficiency analysis of hybrid electric and fuel cell vehicles based on motor-controller efficiency modeling , 2006, IEEE Transactions on Power Electronics.

[29]  Qadeer Ahmed,et al.  Review in thermal effects on the performance of electric motors , 2016, 2016 International Conference on Intelligent Systems Engineering (ICISE).

[30]  Bimal K. Bose,et al.  Modern Power Electronics and AC Drives , 2001 .

[31]  G. Pellegrino,et al.  Comparison of Induction and PM Synchronous Motor Drives for EV Application Including Design Examples , 2012, IEEE Transactions on Industry Applications.

[32]  Larbi Chrifi-Alaoui,et al.  Robust linear parameter varying induction motor control with polytopic models , 2013 .

[33]  Thomas G. Habetler,et al.  A survey of condition monitoring and protection methods for medium voltage induction motors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.