Fluid dynamic modeling of oxygen permeation through mixed ionicelectronic conducting membranes

[1]  Michael Modigell,et al.  Simulation of a membrane unit for oxyfuel power plants under consideration of realistic BSCF membrane properties , 2010 .

[2]  Daniel Loghin,et al.  A three-dimensional numerical model of a single-chamber solid oxide fuel cell , 2009 .

[3]  A. Veen,et al.  Oxidative coupling of methane using catalyst modified dense perovskite membrane reactors , 2009 .

[4]  A. Paglianti,et al.  CFD modelling of inorganic membrane modules for gas mixture separation , 2009 .

[5]  Alfons Kather,et al.  Comparative thermodynamic analysis and integration issues of CCS steam power plants based on oxy-combustion with cryogenic or membrane based air separation , 2009 .

[6]  Song Wu,et al.  Conversion of existing coal-fired power plants to oxyfuel combustion: Case study with experimental results and CFD-simulations , 2009 .

[7]  Alex C. Hoffmann,et al.  Numerical modeling of solid oxide fuel cells , 2008 .

[8]  C. Siegel.  Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells , 2008 .

[9]  Jaka Sunarso,et al.  Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation , 2008 .

[10]  J. M. Serra,et al.  IT-SOFC supported on Mixed Oxygen Ionic-Electronic Conducting Composites , 2008 .

[11]  Ruy Sousa,et al.  Modeling and simulation of the anode in direct ethanol fuels cells , 2008 .

[12]  E. Ivers-Tiffée,et al.  3D-Modelling and Performance Evaluation of Mixed Conducting (MIEC) Cathodes , 2007 .

[13]  Juan C. Ramirez,et al.  Simulations of heat and oxygen diffusion in UO2 nuclear fuel rods , 2006 .

[14]  X. Tan,et al.  Mixed Conducting Ceramics for Catalytic Membrane Processing , 2006 .

[15]  Philippe Moulin,et al.  Computational fluid dynamics applied to membranes: State of the art and opportunities , 2006 .

[16]  S. Diethelm,et al.  Tubular La0.7Ca0.3Fe0.85Co0.15O3−δ Perovskite Membranes, Part II: Performance and Stability , 2006 .

[17]  Rajamani Krishna,et al.  Mass Transfer in Multicomponent Mixtures , 2006 .

[18]  J. Caro,et al.  Perovskite hollow-fiber membranes for the production of oxygen-enriched air. , 2005, Angewandte Chemie.

[19]  S. Nakao,et al.  Computational fluid dynamics study on concentration polarization in H2/CO separation membranes , 2005 .

[20]  J. Pérez–Ramírez,et al.  Perovskite membranes in ammonia oxidation: towards process intensification in nitric acid manufacture. , 2005, Angewandte Chemie.

[21]  William B. Zimmerman,et al.  Process Modelling and Simulation with Finite Element Methods , 2004 .

[22]  Henricus J.M. Bouwmeester,et al.  Dense ceramic membranes for methane conversion , 2003 .

[23]  Y. S. Lin,et al.  Controlled Oxidative Coupling of Methane by Ionic Conducting Ceramic Membrane , 2002 .

[24]  W. Sachtler,et al.  Spectroscopic Evidence for a Nitrite Intermediate in the Catalytic Reduction of NOx with Ammonia on Fe/MFI , 2002 .

[25]  N. Papayannakos,et al.  Performance of ceramic membranes at elevated pressure and temperature : effect of non-ideal flow conditions in a pilot scale membrane separator , 1999 .

[26]  Harumi Yokokawa,et al.  Oxygen permeation modelling of perovskites , 1993 .

[27]  K. Kishio,et al.  Diffusion of oxide ion vacancies in perovskite-type oxides , 1988 .

[28]  Stefan Engels,et al.  CFD-based inverse analysis of mass transfer through oxygen transfer membranes , 2010 .

[29]  E. Lemmon,et al.  Viscosity and Thermal Conductivity Equations for Nitrogen, Oxygen, Argon, and Air , 2004 .