Design and Transmission Analysis of an Asymmetrical Spherical Parallel Manipulator

This paper presents an asymmetrical spherical parallel manipulator and its transmissibility analysis. This manipulator contains a center shaft to both generate a decoupled unlimited-torsion motion and support the mobile platform for high positioning accuracy. This work addresses the transmission analysis and optimal design of the proposed manipulator based on its kinematic analysis. The input and output transmission indices of the manipulator are defined for its optimum design based on the virtual coefficient between the transmission wrenches and twist screws. The sets of optimal parameters are identified and the distribution of the transmission index is visualized. Moreover, a comparative study regarding to the performances with the symmetrical spherical parallel manipulators is conducted and the comparison shows the advantages of the proposed manipulator with respect to its spherical parallel manipulator counterparts.

[1]  H. Harry Asada,et al.  Kinematic and static characterization of wrist joints and their optimal design , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[2]  Clément Gosselin,et al.  The agile eye: a high-performance three-degree-of-freedom camera-orienting device , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[3]  J. Angeles,et al.  Generalized transmission index and transmission quality for spatial linkages , 2007 .

[4]  BaiShaoping,et al.  Modelling of a special class of spherical parallel manipulators with euler parameters , 2009 .

[5]  Bernard Roth,et al.  A Transmission Index for Spatial Mechanisms , 1973 .

[6]  J. D. Everett.  A Treatise on the Theory of Screws , 1901, Nature.

[7]  Jinsong Wang,et al.  A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators , 2012 .

[8]  Tian Huang,et al.  A generalized approach for computing the transmission index of parallel mechanisms , 2014 .

[9]  Julius Ludwig Weisbach.  Mechanics of Engineering and of Machinery... , 2012 .

[10]  Jorge Angeles,et al.  Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms , 1995 .

[11]  Guanglei Wu,et al.  Multiobjective Optimum Design of a 3-RRR Spherical Parallel Manipulator with Kinematic and Dynamic Dexterities , 2012 .

[12]  Chao Wu,et al.  Performance evaluation of parallel manipulators: Motion/force transmissibility and its index , 2010 .

[13]  Keith W. Buffinton,et al.  Definition of Pressure and Transmission Angles Applicable to Multi-Input Mechanisms , 1991 .

[14]  Kenneth J. Waldron,et al.  Rectified Synthesis of Six-Bar Mechanisms With Well-Defined Transmission Angles for Four-Position Motion Generation , 1996 .

[15]  Jorge Angeles,et al.  Structural Optimization of a Spherical Parallel Manipulator Using a Two-Level Approach , 2001, DAC 2001.

[16]  Ferdinand Freudenstein,et al.  Kinematic Synthesis of Linkages , 1965 .

[17]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[18]  A. T. Yang,et al.  Application of Dual-Number Quaternion Algebra to the Analysis of Spatial Mechanisms , 1964 .

[19]  Clément Gosselin,et al.  A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .

[20]  Clément Gosselin,et al.  Singularity Loci of Spherical Parallel Mechanisms , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[21]  Ferdinand Freudenstein,et al.  Kinematic Analysis of Spatial Mechanisms by Means of Screw Coordinates. Part 2—Analysis of Spatial Mechanisms , 1971 .

[22]  Stéphane Caro,et al.  Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator , 2014, Robotics Auton. Syst..

[23]  Guanglei Wu,et al.  Mobile platform center shift in spherical parallel manipulators with flexible limbs , 2014 .

[24]  Chao Wu,et al.  Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility , 2010 .

[25]  S. Bai.  Optimum design of spherical parallel manipulators for a prescribed workspace , 2010 .

[26]  Shahram Payandeh,et al.  Design of spherical parallel mechanisms for application to laparoscopic surgery , 2002, Robotica.

[27]  D. C. Tao,et al.  Applied linkage synthesis , 1964 .

[28]  S. Staicu.  Recursive modelling in dynamics of Agile Wrist spherical parallel robot , 2009 .

[29]  Hiroaki Funabashi,et al.  A Transmission Index for In-Parallel Wire-Driven Mechanisms , 2001 .

[30]  J. Angeles,et al.  A unified input–output analysis of four-bar linkages , 2008 .

[31]  C. Barus.  A treatise on the theory of screws , 1998 .