Synthesis of amphiphilic diblock copolymers derived from renewable dextran by nitroxide mediated polymerization: towards hierarchically structured honeycomb porous films

A dextran-based macroalkoxyamine was designed by a two step end functionalization of the initial polysaccharide. Nitroxide mediated polymerization of styrene (S) and methyl methacrylate (MMA) afforded both dextran-b-P(S-co-MMA) and dextran-b-PS amphiphilic linear diblock copolymers. We subsequently investigated their ability to generate honeycomb structured films using the “Breath Figure” (BF) technique, a method involving the condensation of water droplets during rapid evaporation of a polymer solution under humid conditions. The quality of pore ordering of resultant films was characterized by different microscopy techniques (optical, scanning electron (SEM) and atomic force (AFM) microscopy). While non-spherical pores were observed for dextran-b-P(S-co-MMA) copolymers, an organized pattern of spherical pores was produced with dextran-b-PS amphiphilic copolymers leading to ordered porous bio-hybrid films. The Flory–Huggins interaction parameter χ of the couple PS/dextran is sufficiently high to induce nanophase separation in between the pores, leading to a hierarchically structured honeycomb film based on a renewable dextran block.

[1]  L. Rubatat,et al.  Synthetic Route Effect on Macromolecular Architecture: From Block to Gradient Copolymers Based on Acryloyl Galactose Monomer Using RAFT Polymerization , 2011 .

[2]  K. Kataoka,et al.  Synthesis of Diblock Copolymers Consisting of Hyaluronan and Poly(2-ethyl-2-oxazoline) , 2005 .

[3]  A. Müller,et al.  Interpolyelectrolyte complexes with a polysaccharide corona from dextran-block-PDMAEMA diblock copolymers , 2013 .

[4]  U. Bunz,et al.  Breath Figures as a Dynamic Templating Method for Polymers and Nanomaterials , 2006 .

[5]  Jin Huang,et al.  Highly ordered microporous films containing a polyolefin segment fabricated by the breath-figure method using well-defined polymethylene-b-polystyrene copolymers , 2010 .

[6]  R. Villalonga,et al.  Glycosidation of cu,zn-superoxide dismutase with end-group aminated dextran: pharmacological and pharmacokinetics properties. , 2005, Macromolecular bioscience.

[7]  Hongmin Ma,et al.  Ordered patterns and structures via interfacial self-assembly: superlattices, honeycomb structures and coffee rings. , 2011, Chemical Society reviews.

[8]  L. Billon,et al.  Lectin Recognizable Biomaterials Synthesized via Nitroxide-Mediated Polymerization of a Methacryloyl Galactose Monomer , 2009 .

[9]  D. Gigmes,et al.  3.10 - Nitroxide-Mediated Polymerization , 2012 .

[10]  J. Kadla,et al.  Micropatterned thin film honeycomb materials from regiospecifically modified cellulose. , 2007, Biomacromolecules.

[11]  A. Müller,et al.  Synthesis of polysaccharide-b-PEG block copolymers by oxime click. , 2012, Chemical Communications.

[12]  F Xi,et al.  Porous polymer films and honeycomb structures based on amphiphilic dendronized block copolymers. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[13]  Li‐Ming Zhang,et al.  Synthesis and characterization of novel amphiphilic block copolymers based on maltoheptaose and poly(ε-caprolactone) , 2008 .

[14]  E. Saldívar‐Guerra,et al.  Grafting of Chitosan with Styrene and Maleic Anhydride via Nitroxide‐Mediated Radical Polymerization in Supercritical Carbon Dioxide , 2013 .

[15]  D. Bertin,et al.  β‐Hydrogen transfer from poly(methyl methacrylate) propagating radicals to the nitroxide SG1: Analysis of the chain‐end and determination of the rate constant , 2008 .

[16]  D. Gigmes,et al.  Heterogeneous modification of chitosan via nitroxide-mediated polymerization , 2013 .

[17]  D. Taton,et al.  Micelles and polymersomes obtained by self-assembly of dextran and polystyrene based block copolymers. , 2009, Biomacromolecules.

[18]  Yanxiang Li,et al.  Self-organized ordered microporous thin films from grafting copolymers , 2009 .

[19]  J. Kadla,et al.  Preparation of a thermoresponsive lignin-based biomaterial through atom transfer radical polymerization. , 2010, Biomacromolecules.

[20]  T. Satoh,et al.  Glycoconjugated polymer. 4. Synthesis and aggregation property of well-defined end-functionalized polystyrene with β-cyclodextrin , 2003 .

[21]  D. Taton,et al.  Synthesis of ATRP-induced dextran-b-polystyrene diblock copolymers and preliminary investigation of their self-assembly in water. , 2007, Chemical communications.

[22]  C. Barner‐Kowollik,et al.  Honeycomb structured porous films from amphiphilic block copolymers prepared via RAFT polymerization , 2007 .

[23]  Sébastien Lecommandoux,et al.  Polysaccharide-block-polypeptide copolymer vesicles: towards synthetic viral capsids. , 2009, Angewandte Chemie.

[24]  Biomimetic Honeycomb-Structured Surfaces Formed from Block Copolymers Incorporating Acryloyl Phosphorylcholine , 2003 .

[25]  J. Rodríguez-Hernández,et al.  Breath figures method to control the topography and the functionality of polymeric surfaces in porous films and microspheres , 2012 .

[26]  L. Rubatat,et al.  Recent advances in honeycomb-structured porous polymer films prepared via breath figures , 2012 .

[27]  Lloyd P. M. Johnston,et al.  Copolymerization Propagation Kinetics of Styrene and Methyl Methacrylate-Revisited. 2. Kinetic Analysis , 1997 .

[28]  D. Haddleton,et al.  Well-defined oligosaccharide-terminated polymers from living radical polymerization. , 2000, Biomacromolecules.

[29]  Martina H. Stenzel,et al.  Formation of Regular Honeycomb-Patterned Porous Film by Self-Organization , 2002 .

[30]  P. Degée,et al.  Controlled synthesis of poly(ε-caprolactone)-grafted dextran copolymers as potential environmentally friendly surfactants , 2000 .

[31]  S. Fort,et al.  Thermoresponsive vesicular morphologies obtained by self-assemblies of hybrid oligosaccharide-block-poly(N-isopropylacrylamide) copolymer systems. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[32]  L. Rubatat,et al.  Hierarchical structures based on self-assembled diblock copolymers within honeycomb micro-structured porous films , 2010 .

[33]  L. Rubatat,et al.  pH sensitive hierarchically self-organized bioinspired films. , 2011, Macromolecular rapid communications.

[34]  T. Hayakawa,et al.  From angstroms to micrometers: self-organized hierarchical structure within a polymer film. , 2003, Angewandte Chemie.

[35]  S. Lecommandoux,et al.  Polysaccharide-containing block copolymers: synthesis, properties and applications of an emerging family of glycoconjugates. , 2010, Macromolecular rapid communications.

[36]  C. Barner‐Kowollik,et al.  A simple approach to micro-patterned surfaces by breath figures with internal structure using thermoresponsive amphiphilic block copolymers , 2005 .

[37]  Maud Save,et al.  Preparation of a xanthate‐terminated dextran by click chemistry: Application to the synthesis of polysaccharide‐coated nanoparticles via surfactant‐free ab initio emulsion polymerization of vinyl acetate , 2008 .

[38]  T. Satoh,et al.  10 nm Scale Cylinder-Cubic Phase Transition Induced by Caramelization in Sugar-Based Block Copolymers. , 2012, ACS macro letters.

[39]  C. Barner‐Kowollik,et al.  Molecular composite materials formed from block copolymers containing a side-chain liquid crystalline segment and an amorphous styrene/maleic anhydride segment , 2004 .

[40]  A. Hult,et al.  A one component methodology for the fabrication of honeycomb films from biocompatible amphiphilic block copolymer hybrids: a linear–dendritic–linear twist , 2013 .

[41]  H. Yabu,et al.  Interfacial tension governs the formation of self-organized honeycomb-patterned polymer films , 2009 .

[42]  J. Nicolas,et al.  Theoretical Expression of the Average Activation−Deactivation Equilibrium Constant in Controlled/Living Free-Radical Copolymerization Operating via Reversible Termination. Application to a Strongly Improved Control in Nitroxide-Mediated Polymerization of Methyl Methacrylate , 2005 .

[43]  M. Tizzotti,et al.  Modification of polysaccharides through controlled/living radical polymerization grafting-towards the generation of high performance hybrids. , 2010, Macromolecular rapid communications.

[44]  Zhi‐Kang Xu,et al.  Controlled synthesis of linear and comb-like glycopolymers for preparation of honeycomb-patterned films , 2010 .

[45]  Georges Hadziioannou,et al.  Microporous honeycomb-structured films of semiconducting block copolymers and their use as patterned templates , 2000 .

[46]  Martina H. Stenzel,et al.  Honeycomb structured polymer films via breath figures , 2012 .

[47]  D. Gigmes,et al.  SG1-based alkoxyamine bearing a N-succinimidyl ester: A versatile tool for advanced polymer synthesis , 2008 .

[48]  K. Loos,et al.  Synthesis of Amylose-block-polystyrene Rod-Coil Block Copolymers , 1997 .

[49]  Christopher J. Ellison,et al.  Oligosaccharide/silicon-containing block copolymers with 5 nm features for lithographic applications. , 2012, ACS nano.

[50]  F. Winnik,et al.  Synthesis, reactivity, and pH-responsive assembly of new double hydrophilic block copolymers of carboxymethyldextran and poly(ethylene glycol) , 2007 .

[51]  Thomas P. Davis,et al.  Formation of honeycomb-structured, porous films via breath figures with different polymer architectures , 2006 .

[52]  J. Kadla,et al.  Design of functionalized cellulosic honeycomb films: site-specific biomolecule modification via "click chemistry". , 2012, Biomacromolecules.

[53]  L. Rubatat,et al.  Highly structured pH-responsive honeycomb films by a combination of a breath figure process and in situ thermolysis of a polystyrene-block-poly(ethoxy ethyl acrylate) precursor , 2013 .

[54]  C. Barner‐Kowollik,et al.  Polystyrene comb polymers built on cellulose or poly(styrene-co-2-hydroxyethylmethacrylate) backbones as substrates for the preparation of structured honeycomb films , 2005 .

[55]  V. Soldi,et al.  Self-assembly of amphiphilic glycoconjugates into lectin-adhesive nanoparticles. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[56]  Shunsuke Yagi,et al.  Synthesis and characterization of cellulose- b -polystyrene , 2010 .

[57]  A. Müller,et al.  New routes to the synthesis of amylose-block-polystyrene rod-coil block copolymers. , 2002, Biomacromolecules.

[58]  Xin Wang,et al.  Janus-like polymer particles prepared via internal phase separation from emulsified polymer/oil droplets , 2009 .

[59]  Aaron W Feldman,et al.  FILMS. THE SPREADING OF LIQUIDS AND THE SPREADING COEFFICIENT , 1922 .

[60]  K. Akiyoshi,et al.  Enzymatic synthesis and characterization of amphiphilic block copolymers of poly(ethylene oxide) and amylose , 1999 .

[61]  S. Lesieur,et al.  Characterization of Dextran−Poly(isobutylcyanoacrylate) Copolymers Obtained by Redox Radical and Anionic Emulsion Polymerization , 2006 .

[62]  Mohan Srinivasarao,et al.  Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film , 2001, Science.

[63]  P. Couvreur,et al.  Radical Emulsion Polymerization of Alkylcyanoacrylates Initiated by the Redox System Dextran-Cerium(IV) under Acidic Aqueous Conditions , 2003 .

[64]  K. Matyjaszewski,et al.  Comprehensive Modeling Study of Nitroxide-Mediated Controlled/Living Radical Copolymerization of Methyl Methacrylate with a Small Amount of Styrene , 2009 .

[65]  Jun Fu,et al.  Ordered honeycomb-structured gold nanoparticle films with changeable pore morphology: from circle to ellipse. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[66]  Bernard François,et al.  Self-organized honeycomb morphology of star-polymer polystyrene films , 1994, Nature.