Laser welding process and strength enhancement of carbon fiber reinforced thermoplastic composites and metals dissimilar joint: A review

[1]  L. Sheng,et al.  Effect of Laser Micro-Texturing on Laser Joining of Carbon Fiber Reinforced Thermosetting Composites to TC4 Alloy , 2022, Materials.

[2]  F. Liu,et al.  Joining of metal and non-polar polypropylene composite through a simple functional group seeding layer , 2022, Journal of Manufacturing Processes.

[3]  Jianfeng Wang,et al.  Effect of groove configuration on mechanical properties and fracture behavior of 6061 Al alloy and CFRTP laser joint , 2022, The International Journal of Advanced Manufacturing Technology.

[4]  Yanxi Zhang,et al.  Research Progress on Characterization and Regulation of Forming Quality in Laser Joining of Metal and Polymer, and Development Trends of Lightweight Automotive Applications , 2022, Metals.

[5]  F. Ning,et al.  Joining CFRP/Ti stacks by directed energy deposition: Surface topography effects on interface formation and bonding , 2022, Composites Part B: Engineering.

[6]  L. Sheng,et al.  Experimental Study on Carbon Fiber-Reinforced Composites Cutting with Nanosecond Laser , 2022, Materials.

[7]  Yanxi Zhang,et al.  Laser joining technology of polymer-metal hybrid structures - A review , 2022, Journal of Manufacturing Processes.

[8]  X. Zhan,et al.  Numerical simulation of thermal distribution and residual stress characteristic for laser wobble joining of CFRTP and Ti-6Al-4V alloy , 2022, Journal of Manufacturing Processes.

[9]  Bo Chen,et al.  Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction , 2022, Composites Part B: Engineering.

[10]  T. Niendorf,et al.  Measurement and simulation of residual stresses in laser welded CFRP/steel lap joints , 2022, Composite Structures.

[11]  R. Nath,et al.  Effect of tool rotational speed on friction stir welding of polymer using self-heated tool , 2022, Production Engineering.

[12]  H. Shizuka,et al.  Influence of Tool pin Profiles in Friction Stir Welding of Aluminum Alloy and Polycarbonate , 2022, Defect and Diffusion Forum.

[13]  Xiangdong Gao,et al.  Keyhole dynamic status and spatter behavior during welding of stainless steel with adjustable-ring mode laser beam , 2022, Journal of Manufacturing Processes.

[14]  Hao Teng,et al.  Fabrication processes of metal-fiber reinforced polymer hybrid components: a review , 2022, Advanced Composites and Hybrid Materials.

[15]  Liqun Li,et al.  Influence of laser welding power on steel/CFRP lap joint fracture behaviors , 2022, Composite Structures.

[16]  Bo Chen,et al.  Effect of laser power on laser joining of carbon fiber reinforced plastic to AZ31B Mg alloy , 2022, Optics & Laser Technology.

[17]  X. Zhan,et al.  Numerical simulation and experimental investigation of laser joining Ti6Al4V alloy and CFRTP with embedded Ti6Al4V alloy , 2022, Optics & Laser Technology.

[18]  Junqi Shen,et al.  Influence of scanning speed and defocus distance on laser welded PA6GF30/SUS444 dissimilar lap joints , 2022, Optics & Laser Technology.

[19]  Xiang Li,et al.  Laser welding of carbon-fibre-reinforced polyetherketone and 304 stainless steel: Cost-effective approach using prefabricated holes , 2022, Optics & Laser Technology.

[20]  Zhenmin Wang,et al.  Femtosecond laser fabricated micro/nano interfacial structures to strengthen CFRPEEK/A6061-T6 FLJ hybrid joints , 2021, Composites Part B: Engineering.

[21]  J.R. Lu,et al.  Experimental study of CFRP laser surface modification and bonding characteristics of CFRP/Al6061 heterogeneous joints , 2021, Composite Structures.

[22]  Bo Chen,et al.  Effect of the laser texturing width on hot-pressing joining of AZ31B and CFRTP , 2021 .

[23]  R. Xiao,et al.  Effect of beam shaping on laser joining of CFRP and Al-Li alloy , 2021 .

[24]  Zhenyuan Jia,et al.  Influence of processing parameters on joint shear performance in laser direct joining of CFRTP and aluminum alloy , 2021 .

[25]  Bo Chen,et al.  Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints , 2021 .

[26]  Ruyu Tian,et al.  Experimental study on CFRP drilling with the picosecond laser “double rotation” cutting technique , 2021 .

[27]  Yanxi Zhang,et al.  Interface Formation and Bonding Mechanisms of Laser Welding of PMMA Plastic and 304 Austenitic Stainless Steel , 2021, Metals.

[28]  Zhenmin Wang,et al.  Enhancing Interfacial Reliability of Metal-Thermoplastic Hybrid Joints via Adding Carbon Fiber and Adjusting Welding Heat Input. , 2021, ACS applied materials & interfaces.

[29]  M. Gao,et al.  Improving the interfacial bonding strength of dissimilar PA66 plastic and 304 stainless steel by oscillating laser beam , 2021 .

[30]  L. Sheng,et al.  Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method , 2021 .

[31]  Bo Chen,et al.  Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6Al4V , 2021 .

[32]  Zhenmin Wang,et al.  Adhesion enhancement of PEEK/6161-T6 FLJ joints via laser surface modification , 2021, Composites Part B: Engineering.

[33]  Bo Chen,et al.  Influence of process parameters on the joint characteristics during laser joining of aluminium alloy and CFRTP , 2021 .

[34]  Yanxi Zhang,et al.  Optimization of weld strength for laser welding of steel to PMMA using Taguchi design method , 2021 .

[35]  P. Horst,et al.  Numerical Investigation of Residual Stresses in Welded Thermoplastic CFRP Structures , 2021, Journal of Composites Science.

[36]  Jihai Zhang,et al.  Direct Bonding of Polymer and Metal with an Ultrahigh Strength: Laser Treatment and Mechanical Interlocking , 2021, Advanced Engineering Materials.

[37]  L. Sheng,et al.  Effect of Interface Pretreatment of Al Alloy on Bonding Strength of the Laser Joined Al/CFRTP Butt Joint , 2021, Micromachines.

[38]  T. Yue,et al.  Combined effects of temperature field and ultrasonic vibration on bubble motion in laser joining of plastic to metal , 2021 .

[39]  L. Spiess,et al.  Effect of thermoplastic morphology on mechanical properties in laser-assisted joining of polyamide 6 with aluminum , 2020, Welding in the World.

[40]  Bo Chen,et al.  Laser joining of CFRTP to titanium alloy via laser surface texturing , 2020 .

[41]  Bo Chen,et al.  Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy , 2020 .

[42]  S. Genna,et al.  Homogenization of temperature distribution at metal-polymer interface during Laser Direct Joining , 2020 .

[43]  Wenwu Zhang,et al.  CFRTP -Al alloy laser assisted joining with a high speed rotational welding technology , 2020 .

[44]  P. Plapper,et al.  Highlighting Chemical Bonding between Nylon-6.6 and the Native Oxide from an Aluminum Sheet Assembled by Laser Welding , 2020 .

[45]  Leilei Wang,et al.  Investigation of laser joining process of CFRTP and aluminum alloy , 2020 .

[46]  T. Czigány,et al.  Integrated Structures from Dissimilar Materials: The Future Belongs to Aluminum–Polymer Joints , 2020, Advanced Engineering Materials.

[47]  Bo Chen,et al.  Influence of defocus distance on laser joining of CFRP to titanium alloy , 2020 .

[48]  Gang Liu,et al.  Effect of laser heat input on the interface morphology during laser joining of CFRTP and 6061 aluminum alloy , 2020 .

[49]  Zifa Xu,et al.  Experimental research on CFRTP-Al alloy laser butt joining , 2020 .

[50]  Taek-Eon Jeong,et al.  Pre-Inscribed Laser Surface Pattering for Increased Joining Strength in Laser Fusion Bonding of CFRP and Zinc-Coated Steel , 2019, Applied Sciences.

[51]  Wenwu Zhang,et al.  Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method , 2019, Composites Part B: Engineering.

[52]  Yan-bin Chen,et al.  Joint formation and fracture characteristics of laser welded CFRP/TC4 joints , 2019, Journal of Manufacturing Processes.

[53]  A. Olowinsky,et al.  Influence of self-organizing microstructures on the wettability of molten plastic on steel for hybrid plastic-metal joints , 2019, Welding in the World.

[54]  Q. Gong,et al.  Experimental and Theoretical Investigation of Laser Pretreatment on Strengthening the Heterojunction between Carbon Fiber-Reinforced Plastic and Aluminum Alloy. , 2019, ACS applied materials & interfaces.

[55]  S. M. Hasheminia,et al.  Failure mechanism of bonded joints with similar and dissimilar material , 2019, Composites Part B: Engineering.

[56]  Zaoyang Guo,et al.  Porosity Elimination in Modified Direct Laser Joining of Ti6Al4V and Thermoplastics Composites , 2019, Applied Sciences.

[57]  M. Dapino,et al.  Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM) , 2019, Composite Structures.

[58]  J. Kim,et al.  Hot metal pressing joining of carbon fiber reinforced plastic to AZ31 Mg alloy and the effect of the oxide surface layer on joint strength , 2017, Applied Surface Science.

[59]  贾少辉 Shaohui Jia,et al.  Experimental and Numerical Studies on Laser Stir Welding of Carbon Fiber Reinforced Thermal Polymers/Aluminum Alloy , 2019 .

[60]  T. Ishikawa,et al.  Shear and tensile joint strengths of carbon fiber-reinforced thermoplastics using ultrasonic welding , 2019, Composites Part A: Applied Science and Manufacturing.

[61]  P. Ajayan,et al.  Composites with carbon nanotubes and graphene: An outlook , 2018, Science.

[62]  S. Genna,et al.  Laser assisted joining of AA5053 aluminum alloy with polyvinyl chloride (PVC) , 2018, Optics & Laser Technology.

[63]  H. Akebono,et al.  Effect of welding time on fatigue properties of friction stir spot welds of Al to carbon fibre-reinforced plastic , 2018, Science and Technology of Welding and Joining.

[64]  J. Shan,et al.  Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt ®” , 2018, International Journal of Adhesion and Adhesives.

[65]  M. Banea,et al.  Multi-material adhesive joints for automotive industry , 2018, Composites Part B: Engineering.

[66]  J. Kim,et al.  Effect of resin matrix on the strength of an AZ31 Mg alloy-CFRP joint made by the hot metal pressing technique , 2018, Composite Structures.

[67]  Z. Wang,et al.  Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids , 2018, Composites Part B: Engineering.

[68]  X. Zhan,et al.  Effect of infrared laser surface treatment on the microstructure and properties of adhesively CFRP bonded joints , 2018, Optics & Laser Technology.

[69]  A. Paoletti,et al.  Friction Assisted Joining of titanium and polyetheretherketone (PEEK) sheets , 2018, Thin-Walled Structures.

[70]  S. Genna,et al.  Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with Polyetheretherketone (PEEK) , 2018, International Journal of Adhesion and Adhesives.

[71]  S. Genna,et al.  Effect of laser cleaning in Laser Assisted Joining of CFRP and PC sheets , 2018, Composites Part B: Engineering.

[72]  P. Leo,et al.  Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization , 2018, Composites Part B: Engineering.

[73]  Y. Shin,et al.  Analysis of weld geometry and liquid flow in laser transmission welding between polyethylene terephthalate (PET) and Ti6Al4V based on numerical simulation , 2018, Optics & Laser Technology.

[74]  Qiang Wang,et al.  CFRTP and stainless steel laser joining: Thermal defects analysis and joining parameters optimization , 2018, Optics & Laser Technology.

[75]  Qiang Wang,et al.  Research on carbon fiber reinforced thermal polymer/stainless steel laser direct joining , 2018, Journal of Laser Applications.

[76]  S. Genna,et al.  Optimization of laser-assisted joining through an integrated experimental-simulation approach , 2018 .

[77]  L. Sheng,et al.  Influence of Processing Parameters on Laser Direct Joining of CFRTP and Stainless Steel , 2018 .

[78]  A. Paoletti,et al.  Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining , 2018 .

[79]  Ruibin Zhang,et al.  A Review of Automotive Lightweight Technology , 2018 .

[80]  J. Shan,et al.  Evaluation of the CFRP grafting and its influence on the laser joining CFRP to aluminum alloy , 2018 .

[81]  Lihui Wu,et al.  Direct joining of oxygen-free copper and carbon-fiber-reinforced plastic by friction lap joining , 2018 .

[82]  D. Hui,et al.  Recent advances in carbon-fiber-reinforced thermoplastic composites: A review , 2017, Composites Part B: Engineering.

[83]  P. Plapper,et al.  Aluminum pretreatment by a laser ablation process: influence of processing parameters on the joint strength of laser welded aluminum - Polyamide assemblies , 2018 .

[84]  M. Hertel,et al.  Thermal joining of thermoplastics to metals: Surface preparation of steel based on laser radiation and tungsten inert gas arc process , 2018 .

[85]  Alfonso Paoletti,et al.  Friction-assisted clinching of Aluminum and CFRP sheets , 2018 .

[86]  T. Yue,et al.  Fatigue behaviour of titanium/PET joints formed by ultrasound-aided laser welding , 2018 .

[87]  S. Genna,et al.  A procedure for calibration and validation of FE modelling of laser-assisted metal to polymer direct joining , 2018 .

[88]  Maoyuan Li,et al.  Improvement in interlaminar strength and galvanic corrosion resistance of CFRP/Mg laminates by laser ablation , 2017 .

[89]  Zhong Ning Guo,et al.  Laser joining of metals to plastics with ultrasonic vibration , 2017 .

[90]  A. Paoletti,et al.  Friction assisted joining of aluminum and PVC sheets , 2017 .

[91]  G. Littlefair,et al.  Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys-A review , 2017 .

[92]  Alfonso Maffezzoli,et al.  Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites , 2017 .

[93]  J. Shan,et al.  Improvement of the laser joining of CFRP and aluminum via laser pre-treatment , 2017 .

[94]  H. Riegel,et al.  A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components , 2017 .

[95]  D. Ko,et al.  Two-steps clinching of aluminum and Carbon Fiber Reinforced Polymer sheets , 2017 .

[96]  Qiang Wang,et al.  Numerical and experimental investigation on joining CFRTP and stainless steel using fiber lasers , 2017 .

[97]  Furat I. Hussein,et al.  Finite element thermal analysis for PMMA/st.st.304 laser direct joining , 2017 .

[98]  Dae-Cheol Ko,et al.  Feasibility of mechanical clinching for joining aluminum AA6082-T6 and Carbon Fiber Reinforced Polymer sheets , 2016 .

[99]  Jing Zhang,et al.  Effect of anodizing pretreatment on laser joining CFRP to aluminum alloy A6061 , 2016 .

[100]  S. Na,et al.  Effect of surface pre-oxidation on laser assisted joining of acrylonitrile butadiene styrene (ABS) and zinc-coated steel , 2016 .

[101]  Xiao Wang,et al.  Simulation and experimental study of laser transmission welding considering the influence of interfacial contact status , 2016 .

[102]  A. Olowinsky,et al.  Experimental and Simulative Investigations of Laser Assisted Plastic-metal-joints Considering Different Load Directions , 2016 .

[103]  Rolf Steinhilper,et al.  Assessment strategies for composite-metal joining technologies : A review , 2016 .

[104]  J. Bergmann,et al.  Laser-Based Joining of Thermoplastics to Metals: Influence of Varied Ambient Conditions on Joint Performance and Microstructure , 2016 .

[105]  S. T. Amancio-Filho,et al.  Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap joints , 2015 .

[106]  Manfred Horstmann,et al.  Assessment of alternative joining techniques for Ti–6Al–4V/CFRP hybrid joints regarding tensile and fatigue strength , 2015 .

[107]  Jia-lie Ren,et al.  Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel , 2015 .

[108]  J. Min,et al.  Friction stir blind riveting of carbon fiber-reinforced polymer composite and aluminum alloy sheets , 2015 .

[109]  Xiao Wang,et al.  Experimental Study of Laser Direct Joining of Metal and Carbon Fiber Reinforced Nylon , 2014 .

[110]  S. Katayama,et al.  Effect of surface modification on laser direct joining of cyclic olefin polymer and stainless steel , 2014 .

[111]  Kazuhiro Nakata,et al.  Joining of metal to plastic using friction lap welding , 2014 .

[112]  Xiaozhi Hu,et al.  Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate , 2014 .

[113]  G. Verhaeghe,et al.  A Combined Experimental and Numerical Approach to the Laser Joining of Hybrid Polymer – Metal Parts , 2014 .

[114]  Huixia Liu,et al.  Simulation and optimization of continuous laser transmission welding between PET and titanium through FEM, RSM, GA and experiments , 2013 .

[115]  S. T. Amancio-Filho,et al.  Friction Riveting of glass–fibre-reinforced polyetherimide composite and titanium grade 2 hybrid joints , 2013 .

[116]  I. Yoshitake,et al.  Hybrid epoxy-silyl modified polymer adhesives for CFRP sheets bonded to a steel substrate , 2013 .

[117]  K. F. Tamrin,et al.  Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength , 2013 .

[118]  Furat I. Hussein,et al.  Evaluation of PMMA joining to stainless steel 304 using pulsed Nd:YAG laser , 2013 .

[119]  Ren Jia-lie,et al.  EFFECTS OF Cr PLATING LAYER ON SHEAR STRENGTH AND INTERFACE BONDING CHARACTERISTICS OF MILD STEEL/CFRP JOINT BY LASER HEATING , 2013 .

[120]  Seiji Katayama,et al.  Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel , 2013 .

[121]  Seiji Katayama,et al.  Laser direct joining of carbon fiber reinforced plastic to aluminum alloy , 2013 .

[122]  Livan Fratini,et al.  Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks , 2013 .

[123]  P. Woizeschke,et al.  Recent Developments for Laser Beam Joining of CFRP-aluminum Structures☆ , 2013 .

[124]  Michael Schmidt,et al.  Thermal Joining of Thermoplastic Metal Hybrids by Means Of Mono- and Polychromatic Radiation , 2013 .

[125]  Tao Yu,et al.  Experimental study on CFRP-to-steel bonded interfaces , 2012 .

[126]  Arunanshu S. Kuar,et al.  Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling , 2012 .

[127]  A. Lamikiz,et al.  Novel Strategies for Laser Joining of Polyamide and AISI 304 , 2012 .

[128]  S. Katayama,et al.  Laser direct joining of carbon fibre reinforced plastic to stainless steel , 2011 .

[129]  D. Eifler,et al.  Damage Monitoring of Ultrasonically Welded Aluminum/ CFRP-Joints by Electrical Resistance Measurements , 2011 .

[130]  F. Vollertsen,et al.  Novel method for joining CFRP to aluminium , 2010 .

[131]  G. Auner,et al.  Chemical bond formation during laser bonding of Teflon ® FEP and titanium , 2009 .

[132]  Dietmar Eifler,et al.  Ultrasonic Metal Welding of Aluminium Sheets to Carbon Fibre Reinforced Thermoplastic Composites , 2009 .

[133]  S. Katayama,et al.  Laser direct joining of metal and plastic , 2008 .

[134]  Q. Bénard,et al.  Surface treatment of carbon/epoxy and glass/epoxy composites with an excimer laser beam , 2006 .

[135]  L. Ye,et al.  Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review , 2001 .