Computational modeling of metal matrix composite materials—II. Isothermal stress-strain behavior

Abstract The mechanical behavior of particulate reinforced metal matrix composites, in particular an SiC reinforced Al-3 wt% Cu model system, was analyzed numerically using the computational micromechanics approach. In this, the second in a series of four articles, the isothermal overall stress-strain behavior and its relation to microstructural deformation is examined in detail. The macroscopic strengthening effect of the reinforcement is quantified in terms of a hardness increment . As seen in the first article for microscale deformation, inhomogeneous and localized stress patterns develop in the microstructures. These are predominantly controlled by the positions of the reinforcing particles. Within the particles stress levels are high, indicating a load transfer from matrix to reinforcement. The higher straining that develops in the matrix grains, relative to the unreinforced polycrystal, causes matrix hardness advancement . Hydrostatic stress levels in the composite are enhanced by constraints on plastic flow imposed by the particles. Constrained plastic flow and matrix hardness advancement are seen as major composite strengthening mechanisms. The latter is sensitive to the strain hardening nature in the matrix alloy. To assess the effects of constraint more fully, simulations using external confining loads were performed. Both strengthening mechanisms depend strongly on reinforcement volume fraction and morphology. In addition, texture development and grain interaction influence the overall composite behavior. Failure mechanisms can be inferred from the microscale deformation and stress patterns. Intense strain localization and development of high stresses within particles and in the matrix close to the particle vertices indicate possible sites for fracture.