A Novel Approach for Analyzing the Effects of Almen Intensity on the Residual Stress and Hardness of Shot-Peened (TiB + TiC)/Ti–6Al–4V Composite: Deep Learning
暂无分享,去创建一个
[1] K. Reza Kashyzadeh. Failure Strength of Automotive Steering Knuckle Made of Metal Matrix Composite , 2023, Applied Mechanics.
[2] S. Ghorbani,et al. New neural network-based algorithm for predicting fatigue life of aluminum alloys in terms of machining parameters , 2023, Engineering Failure Analysis.
[3] G. Farrahi,et al. Improvement of HCF life of automotive safety components considering a novel design of wheel alignment based on a Hybrid multibody dynamic, finite element, and data mining techniques , 2022, Engineering Failure Analysis.
[4] N. Amiri,et al. Prediction of Concrete Compressive Strength Using a Back-Propagation Neural Network Optimized by a Genetic Algorithm and Response Surface Analysis Considering the Appearance of Aggregates and Curing Conditions , 2022, Buildings.
[5] M. Bandini,et al. On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg , 2022, International Journal of Fatigue.
[6] A. du Plessis,et al. Fatigue behaviour of notched laser powder bed fusion AlSi10Mg after thermal and mechanical surface post-processing , 2022, Materials Science and Engineering: A.
[7] M. Bandini,et al. Hybrid thermal, mechanical and chemical surface post-treatments for improved fatigue behavior of laser powder bed fusion AlSi10Mg samples with notched geometry , 2021, Surface and Coatings Technology.
[8] S. Bagherifard,et al. Analysing the Fatigue Behaviour and Residual Stress Relaxation of Gradient Nano-Structured 316L Steel Subjected to the Shot Peening via Deep Learning Approach , 2021, Metals and Materials International.
[9] M. J. Mirzaali,et al. Analyzing the mechano-bactericidal effect of nano-patterned surfaces on different bacteria species , 2021 .
[10] M. Gude,et al. Experimental and Numerical Impact Analysis of Automotive Bumper Brackets Made of 2D Triaxially Braided CFRP Composites , 2020, Materials.
[11] Kazem Reza Kashyzadeh,et al. Experimental and Numerical Study of the Static Performance of a Hoop-Wrapped CNG Composite Cylinder Considering Its Variable Wall Thickness and Polymer Liner , 2020, Mechanics of Composite Materials.
[12] Kazem Reza Kashyzadeh. Effects of Axial and Multiaxial Variable Amplitude Loading Conditions on the Fatigue Life Assessment of Automotive Steering Knuckle , 2020, Journal of Failure Analysis and Prevention.
[13] E. Maleki,et al. Fatigue limit prediction and analysis of nano-structured AISI 304 steel by severe shot peening via ANN , 2020, Engineering with Computers.
[14] Soo-Chul Lim,et al. Structural vibration-based classification and prediction of delamination in smart composite laminates using deep learning neural network , 2019, Composites Part B: Engineering.
[15] N. Cho,et al. Cyclic plasticity and creep-cyclic plasticity behaviours of the SiC/Ti-6242 particulate reinforced titanium matrix composites under thermo-mechanical loadings , 2019, Composite Structures.
[16] Yuksel C. Yabansu,et al. Establishing structure-property localization linkages for elastic deformation of three-dimensional high contrast composites using deep learning approaches , 2019, Acta Materialia.
[17] Dongkyu Lee,et al. Material optimization of functionally graded plates using deep neural network and modified symbiotic organisms search for eigenvalue problems , 2019, Composites Part B: Engineering.
[18] Huiyu Zhou,et al. Using deep neural network with small dataset to predict material defects , 2019, Materials & Design.
[19] A. Amanov,et al. Novel experimental methods for the determination of the boundaries between conventional, severe and over shot peening processes , 2018, Surfaces and Interfaces.
[20] Kazem Reza Kashyzadeh,et al. Fatigue behavior prediction and analysis of shot peened mild carbon steels , 2018, International Journal of Fatigue.
[21] Safwan Altarazi,et al. Artificial neural network modeling to evaluate polyvinylchloride composites’ properties , 2018, Computational Materials Science.
[22] S. Yaacob,et al. First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model , 2018, Composite Structures.
[23] A. Fomin,et al. Metal oxide (Ti,Ta)-(TiO2,TaO) coatings produced on titanium using electrospark alloying and modified by induction heat treatment , 2018 .
[24] E. Maleki,et al. Roles of surface coverage increase and re-peening on properties of AISI 1045 carbon steel in conventional and severe shot peening processes , 2018, Surfaces and Interfaces.
[25] M. Shariyat,et al. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle , 2017 .
[26] I. Shishkovsky,et al. Graded layered titanium composite structures with TiB2 inclusions fabricated by selective laser melting , 2017 .
[27] Liqiang Wang,et al. Numerical analysis and experimental validation on residual stress distribution of titanium matrix composite after shot peening treatment , 2016 .
[28] Erfan Maleki,et al. Artificial Neural Network Modeling of Pt/C Cathode Degradation in PEM Fuel Cells , 2016, Journal of Electronic Materials.
[29] E Maleki,et al. Artificial neural networks application for modeling of friction stir welding effects on mechanical properties of 7075-T6 aluminum alloy , 2015 .
[30] Lechun Xie,et al. The influence of shot peening on the surface properties of (TiB + TiC)/Ti–6Al–4V , 2013 .
[31] S. M. Abbasi,et al. Producing Ti–6Al–4V/TiC composite with superior properties by adding boron and thermo-mechanical processing , 2013 .
[32] Di Zhang,et al. The influences of trace TiB and TiC on microstructure refinement and mechanical properties of in situ synthesized Ti matrix composite , 2012 .
[33] S. Hong,et al. Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti–6Al–4V composites , 2012 .
[34] C. Zou,et al. Microstructure and mechanical properties of TiC/Ti–6Al–4V composites processed by in situ casting route , 2011 .
[35] Kazem Reza Kashyzadeh,et al. Experimental and Finite Element Analysis Approach for Fatigue of Unidirectional Fibrous Composites , 2011 .
[36] L. Geng,et al. In situ (TiBw + TiCp)/Ti6Al4V composites with a network reinforcement distribution , 2010 .
[37] L. Geng,et al. Fabrication and tensile properties of in situ TiBw and TiCp hybrid-reinforced titanium matrix composites based on Ti–B4C–C , 2008 .
[38] Yiu-Wing Mai,et al. Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites , 2008 .
[39] H. Wadley,et al. Titanium matrix composite lattice structures , 2008 .
[40] S. Mall,et al. Fatigue behavior of integrally fabricated joints between titanium matrix composite and titanium alloy , 2007 .
[41] Nikhilesh Chawla,et al. Metal-matrix composites in ground transportation , 2006 .
[42] C. Arvieu,et al. Titanium matrix composites processed by continuous binder-powder coating: An alternative fabrication route , 2006 .
[43] Geoffrey E. Hinton,et al. Reducing the Dimensionality of Data with Neural Networks , 2006, Science.
[44] Yee Whye Teh,et al. A Fast Learning Algorithm for Deep Belief Nets , 2006, Neural Computation.
[45] D. Miracle. Metal matrix composites – From science to technological significance , 2005 .
[46] Di Zhang,et al. Superplastic behavior of in situ synthesized (TiB + TiC)/Ti matrix composite , 2005 .
[47] Yu Zhou,et al. Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites , 2005 .
[48] S. Prasad,et al. Aluminum Metal-Matrix Composites for Automotive Applications: Tribological Considerations , 2004 .
[49] Di Zhang,et al. Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites , 2001 .
[50] N. Chandra,et al. Interphase behavior of titanium matrix composites at elevated temperature , 2001 .
[51] Sie Chin Tjong,et al. Microstructural and mechanical characteristics of in situ metal matrix composites , 2000 .
[52] Kazem Reza Kashyzadeh,et al. Fatigue Life Analysis of Automotive Cast Iron Knuckle under Constant and Variable Amplitude Loading Conditions , 2022 .
[53] Amit Aherwar,et al. A study of advancement in application opportunities of aluminum metal matrix composites , 2020, Materials Today: Proceedings.
[54] Praveen Kumar Loharkar,et al. Friction stir welding parameters and application: A review , 2019, Materials Today: Proceedings.
[55] R. Purohit,et al. Advanced Aluminium Matrix Composites: The Critical Need of Automotive and Aerospace Engineering Fields , 2015 .
[56] S. Vijayarangan,et al. Evaluation of metal matrix composite to replace spheroidal graphite iron for a critical component, steering knuckle , 2013 .
[57] Di Zhang,et al. Effect of volume fraction of reinforcement on room temperature tensile property of in situ (TiB + TiC)/Ti matrix composites , 2006 .