Design and kinematics analysis of a novel serial–parallel kinematic machine

A novel serial–parallel kinematic machine based on a serial–parallel manipulator is proposed and its kinematics and statics are studied systematically. First, the concept of serial–parallel kinematic machine formed by the 3-PRS parallel manipulator and the 2-UPR + SPR PM is proposed. Second, the displacement is derived in close form based on the geometrical and dimensional constraints existed in the serial–parallel kinematic machine. Third, the Jacobian, velocity and statics of the serial–parallel kinematic machine are derived in the explicit and compact form. Finally, the formulas for solving the acceleration of this serial–parallel kinematic machine are derived. This research will lay a good foundation for the development of the serial–parallel kinematic machine.

[1]  B. Y. Duan,et al.  Dynamic modeling and active control of a cable-suspended parallel robot , 2008 .

[2]  Feng Gao,et al.  Inverse dynamics of the 6-dof out-parallel manipulator by means of the principle of virtual work , 2009, Robotica.

[3]  Bo Hu,et al.  Kinematics/statics analysis of some limited-dof parallel manipulators by a block diagram modelling system , 2008, Int. J. Comput. Aided Eng. Technol..

[4]  Jean-Pierre Merlet,et al.  Solving the Forward Kinematics of a Gough-Type Parallel Manipulator with Interval Analysis , 2004, Int. J. Robotics Res..

[5]  Karl-Erik Neumann.  Adaptive In-Jig High Load Exechon Machining Technology & Assembly , 2008 .

[6]  Md. Nazrul Islam,et al.  Kinematics and dynamics of 2(3-RPS) manipulators by means of screw theory and the principle of virtual work , 2008 .

[7]  Ichiro Inasaki,et al.  Post-Processor Development of a Hybrid TRR-XY Parallel Kinematic Machine Tool , 2002 .

[8]  Yi Lu,et al.  Solving Driving Forces of 2(3-SPR) Serial-Parallel Manipulator by CAD Variation Geometry Approach , 2006 .

[9]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[10]  Bo Hu,et al.  Formulation of unified Jacobian for serial-parallel manipulators , 2014 .

[11]  Yuefa Fang,et al.  Structural synthesis and analysis of serial–parallel hybrid mechanisms with spatial multi-loop kinematic chains , 2012 .

[12]  Bin Zi,et al.  Dynamics and trajectory tracking control of cooperative multiple mobile cranes , 2016 .

[13]  Jun Wu,et al.  Study on the stiffness of a 5-DOF hybrid machine tool with actuation redundancy , 2009 .

[14]  T. Shiau,et al.  Direct kinematic analysis of a 3-PRS parallel mechanism , 2003 .

[15]  C H Liu,et al.  Direct singular positions of the parallel manipulator Tricept , 2007 .

[16]  권동수.  Spherical joint for coupling three or more links together at one point , 2003 .

[17]  Jing Shi,et al.  Optimal design of 3-DOF PKM module for friction stir welding , 2013 .

[18]  Jaime Gallardo-Alvarado,et al.  Finding the Generalized Forces of a Series-Parallel Manipulator , 2013 .

[19]  Kuang-Chao Fan,et al.  Sensitivity analysis of the 3-PRS parallel kinematic spindle platform of a serial-parallel machine tool , 2003 .

[20]  Liu De-zhong.  Effects of Actuator Disposition and Redundant Actuation on Performance of the Tricept Parallel Mechanism , 2008 .

[21]  Tian Huang,et al.  A Simple yet Effective Approach for Error Compensation of a Tripod-Based Parallel Kinematic Machine , 2000 .

[22]  L. Tsai.  Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work , 2000 .

[23]  Jun Wu,et al.  Simplified strategy of the dynamic model of a 6-UPS parallel kinematic machine for real-time control , 2007 .

[24]  Jun Lin,et al.  Localization, obstacle avoidance planning and control of a cooperative cable parallel robot for multiple mobile cranes , 2015 .

[25]  Yan Jin,et al.  Kinematic modeling of Exechon parallel kinematic machine , 2011 .

[26]  Jinsong Wang,et al.  Analysis and dimensional design of a novel hybrid machine tool , 2003 .

[27]  Qingsong Xu,et al.  Kinematic analysis of a 3-PRS parallel manipulator , 2007 .

[28]  Lung-Wen Tsai,et al.  The Kinematics of a Class of 3-DOF, 4-Legged Parallel Manipulators , 2003 .

[29]  Tanio K. Tanev,et al.  Kinematics of a hybrid (parallel-serial) robot manipulator , 2000 .

[30]  J. Jesús Cervantes-Sánchez,et al.  Static analysis of spatial parallel manipulators by means of the principle of virtual work , 2012 .

[31]  Xia Wu,et al.  Error modeling and sensitivity analysis of a hybrid-driven based cable parallel manipulator , 2014 .

[32]  Hui Zhao,et al.  A novel 5-DOF fully parallel kinematic machine tool , 2006 .

[33]  Yi Lu,et al.  Unification and simplification of velocity/acceleration of limited-dof parallel manipulators with linear active legs , 2008 .

[34]  M. Callegari,et al.  A new class of reconfigurable parallel kinematic machines , 2014 .