Prediction and Optimization of Mechanical Properties of Polypropylene/Waste Tire Powder Blends using a Hybrid Artificial Neural Network-Genetic Algorithm (GA-ANN)

Blends of Polypropylene (PP) and waste ground rubber tire powder are studied with respect to the effect of ethylene—propylene—diene monomer (EPDM) and polypropylene grafted maleic anhydride (PP-g-MA) compatibilizer content by using the Design of Experiments methodology, whereby the effect of the four polymers content on the final mechanical properties are predicted. Uniform design method is especially adopted for its advantages. Optimization is done using hybrid Artificial Neural Network-Genetic Algorithm technique. A rubber formulary with respect to the four ingredients are optimized having maximum tensile strength and then compared with a blend predicted to have maximum elongation at break. It is concluded that the blends show fairly good properties provided that it has a relatively higher concentration of PP-g-MA and EPDM content. SEM investigations also corroborates with the observed mechanical properties. A quantitative relationship is then shown between the material concentration and the mechanical properties as a set of contour plots, which are then tested and confirmed experimentally to conform to the optimum blend ratio.

[1]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[2]  Shaposhnikova Mg.  A comparative study of photooxidation of chlorophyll analogs in an aqueous solution of detergents , 1973 .

[3]  G. Kraus.  Reinforcement of elastomers by carbon black , 1978 .

[4]  George C. Derringer.  Statistical Methods in Rubber Research and Development , 1988 .

[5]  W. E. Baker,et al.  The Role of Functional Polymers in Ground Rubber Tire-Polyethylene Composite , 1992 .

[6]  D. R. Paul.  STRATEGIES FOR COMPATIBILIZATION OF POLYMER BLENDS , 1992 .

[7]  R. Landel,et al.  Mechanical Properties of Polymers and Composites , 1993 .

[8]  Sabu Thomas,et al.  Blends of isotactic polypropylene and nitrile rubber: morphology, mechanical properties and compatibilization , 1995 .

[9]  Douglas J. Cooper,et al.  Pattern‐based closed‐loop quality control for the injection molding process , 1997 .

[10]  Kai-Tai Fang,et al.  An example of a sequential uniform design: Application in capillary electrophoresis , 1997 .

[11]  F. Guan,et al.  A novel strategy for systematic optimization of micellar electrokinetic chromatography separations , 1997 .

[12]  M. A. Williams,et al.  Use of surface modified recycled rubber particles for toughening of epoxy polymers , 1997 .

[13]  Wing-Hong Chan,et al.  Screening the fabrication conditions of ultrafiltration membranes by using the uniform design and regression analysis methods , 1998 .

[14]  L. Schadler,et al.  Effect of addition of polyoxypropylenediamine on the morphology and mechanical properties of maleated polypropylene/maleated rubber blends , 1998 .

[15]  G. Radonjič.  Compatibilization effects of styrenic/rubber block copolymers in polypropylene/polystyrene blends , 1999 .

[16]  José G. Ramírez,et al.  Understanding Design of Experiments: A Primer for Technologists , 1999, Technometrics.

[17]  H. Yeung,et al.  Micelle-mediated extraction and preconcentration of ginsenosides from Chinese herbal medicine. , 2000, Journal of chromatography. A.

[18]  Cliff T. Ragsdale,et al.  Combining a neural network with a genetic algorithm for process parameter optimization , 2000 .

[19]  B. Adhikari,et al.  Reclamation and recycling of waste rubber , 2000 .

[20]  B.H.M. Sadeghi,et al.  A BP-neural network predictor model for plastic injection molding process , 2000 .

[21]  N K Ebube,et al.  Preformulation studies and characterization of the physicochemical properties of amorphous polymers using artificial neural networks. , 2000, International journal of pharmaceutics.

[22]  Yong Zhang,et al.  Uniform Design: Theory and Application , 2000, Technometrics.

[23]  A. Bhowmick,et al.  Thermoplastic elastomeric composition based on ground rubber tire , 2001 .

[24]  P. P. Kundu,et al.  Optimisation of physical and mechanical properties of rubber compounds by response surface methodology––Two component modelling using vegetable oil and carbon black , 2002 .

[25]  Zhang Lin,et al.  Global optimization of absorption chiller system by genetic algorithm and neural network , 2002 .

[26]  Hosahalli S. Ramaswamy,et al.  Modeling and optimization of variable retort temperature (VRT) thermal processing using coupled neural networks and genetic algorithms , 2002 .

[27]  V. Soldi,et al.  Blend of thermosetting polyurethane waste with polypropylene: influence of compatibilizing agent on interface domains and mechanical properties , 2003 .

[28]  J. Yun,et al.  Optimization of submerged‐culture conditions for mycelial growth and exo‐biopolymer production by Auricularia polytricha (wood ears fungus) using the methods of uniform design and regression analysis , 2003, Biotechnology and applied biochemistry.

[29]  S. Kiatkamjornwong,et al.  Effect of rubber ratio, carbon black level, and accelerator level on natural rubber/bromobutyl rubber blend properties , 2003 .

[30]  B. Fang,et al.  Optimization of polymerase chain reaction-amplified conditions using the uniform design method , 2004 .

[31]  B. R. Gupta,et al.  Performance optimization of a counter rotating twin screw extruder for recycling natural rubber vulcanizates using response surface methodology , 2004 .

[32]  B. Guo,et al.  Thermoplastic Elastomers Derived from Scrap Rubber Powder/LLDPE Blend with LLDPE-graft-(Epoxidized Natural Rubber) Dual Compatibilizer , 2004 .

[33]  B. Ozcelik,et al.  Determination of effecting dimensional parameters on warpage of thin shell plastic parts using integrated response surface method and genetic algorithm , 2005 .

[34]  R. Scaffaro,et al.  Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber : Mechanical and rheological analysis , 2005 .