Diode Laser-Driven Microthrusters: A New Departure for Micropropulsion

We developed an entirely new type of orientation thruster for micro- and nanosatellites. The laser plasma thruster is based on the recent commercial availability of diode lasers with sufficient brightness and 100% duty cycle to produce a repetitively pulsed or continuous vapor or plasma jet on a surface in vacuum. A low-voltage semiconductor switch can drive the laser. A lens focuses the laser diode output on the ablation target, producing a miniature jet that provides the thrust. Single-impulse dynamic range is nearly five orders of magnitude, and the minimum impulse bit is 1 nN/s in a 100-„s pulse. Even with diffraction-limited focusing optics, at least 0.5-W optical power is needed to produce thrust from selected ablator materials. Thrust-to-power ratio Cm is 50 to 100„N/W and specific impulse Isp is 200‐500 s with a 1-W laser, depending partially on the illumination mode. Transmission and reflection (R) illumination modes are discussed. R mode gives about 50% better Isp and two times better Cm. Improved results are anticipated from higher laser power in the reflection mode. The prototype engine we are developing is intended to provide lifetime on-orbit steering for a 5-kg satellite, as well as reentering it from low Earth orbit.

[1]  I. Ursu,et al.  Plasma-target coupling in the case of TEA-CO2 laser produced breakdown in front of a solid target , 1980 .

[2]  Jonathan W. Campbell,et al.  Optimum parameters for laser launching objects into low Earth orbit , 2000 .

[3]  I. S. Gradshteyn,et al.  Table of Integrals, Series, and Products , 1976 .

[4]  Richard F. Haglund,et al.  Phase explosion and ablation in fused silica initiated by an ultrashort-pulse tunable mid-infrared free-electron laser , 2000, SPIE High-Power Laser Ablation.

[5]  A. M. Prokhorov,et al.  Recoil impulse received by metal targets as a result of interaction with microsecond CO2 laser radiation , 1976 .

[6]  Kathleen C. Howell,et al.  Control strategies for formation flight in the vicinity of the libration points , 2005 .

[7]  Alexander Wokaun,et al.  Polymers for UV and near-IR irradiation , 2001 .

[8]  Michael Keidar,et al.  Plasma generation and plume expansion for a transmission-mode microlaser ablation plasma thruster , 2004 .

[9]  C. Duzy,et al.  Interaction of a pulsed XeF laser with an aluminum surface , 1980 .

[10]  James P. Reilly,et al.  Impulse Transfer from Pulsed CO, Laser Irradiation at Reduced Ambient Pressures , 1978 .

[11]  S. J. Thomas,et al.  Momentum Transfer Produced by Focused Laser Giant Pulses , 1966 .

[12]  J. A. McKay,et al.  Survey of Laser-Produced Pressure and Impulse Data , 1988 .

[13]  R. Dreyfus.  Cu0, Cu+, and Cu2 from excimer‐ablated copper , 1991 .

[14]  R. F. Harrison,et al.  Impulse coupling to targets in vacuum by KrF, HF, and CO2 single‐pulse lasers , 1988 .

[15]  J. Mitteldorf,et al.  Coupling of pulsed 0.35‐μm laser radiation to aluminum alloys , 1982 .

[16]  N. Basov,et al.  Gas-Dynamic Processes in Irradiation of Solids , 1969 .

[17]  I. Ursu,et al.  The vaporization of a metallic target by a microsecond pulsed TE-CO2 laser radiation , 1981 .

[18]  Claude R. Phipps,et al.  LISP: Laser impulse space propulsion , 1994 .

[19]  Claude R. Phipps,et al.  Enhanced vacuum laser-impulse coupling by volume absorption at infrared wavelengths , 1990 .