A 0.13μm CMOS UWB receiver front-end using passive mixer

This paper presents the design of a direct conversion receiver front-end for UWB application. Its key feature is a wideband balun-coupled noise cancelling transconductance input stage, followed by double-balanced quadrature passive mixers and transimpedance loading amplifiers. Simulation results show that the front-end achieves an input return loss (S11) below -10 dB between 3-5 GHz, a voltage conversion gain (CG) of 22 dB, a minimum noise figure of 3.3 dB, and a third order intermodulation intercept point (IIP3) of -14 dBm. Designed in 0.13 mum CMOS technology, it consumes 18 mA from a 1.2 V supply, including the on-chip quadrature local oscillator (LO) generation and buffer circuits.

[1]  Yiping Feng,et al.  Design of a High Performance 2-GHz Direct-Conversion Front-End With a Single-Ended RF Input in 0.13 $\mu$m CMOS , 2009, IEEE Journal of Solid-State Circuits.

[2]  Gaku Takemura,et al.  A high performance 2-GHz direct-conversion front end with single-ended RF input in 0.13 um CMOS , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[3]  Ali M. Niknejad,et al.  A 1.5-V 0.7-2.5-GHz CMOS Quadrature Demodulator for Multiband Direct-Conversion Receivers , 2007, IEEE J. Solid State Circuits.

[4]  R. Castello,et al.  A 72-mW CMOS 802.11a direct conversion front-end with 3.5-dB NF and 200-kHz 1/f noise corner , 2005, IEEE Journal of Solid-State Circuits.

[5]  Bumman Kim,et al.  A New RF CMOS Gilbert Mixer With Improved Noise Figure and Linearity , 2008, IEEE Transactions on Microwave Theory and Techniques.

[6]  Hao Min,et al.  A CMOS wide-band low-noise amplifier with balun-based noise-canceling technique , 2007, 2007 IEEE Asian Solid-State Circuits Conference.

[7]  Asad A. Abidi,et al.  A merged CMOS LNA and mixer for a WCDMA receiver , 2003 .

[8]  David J. Allstot,et al.  A capacitor cross-coupled common-gate low-noise amplifier , 2005, IEEE Transactions on Circuits and Systems II: Express Briefs.

[9]  W. Redman-White,et al.  1/f noise in passive CMOS mixers for low and zero IF integrated receivers , 2001, Proceedings of the 27th European Solid-State Circuits Conference.

[10]  Asad A. Abidi,et al.  Noise in passive FET mixers: a simple physical model , 2004, Proceedings of the IEEE 2004 Custom Integrated Circuits Conference (IEEE Cat. No.04CH37571).

[11]  D.S. Malhi,et al.  3.1-4.7GHz WiMedia UWB RF/Analog Front-End in 130nm CMOS , 2007, 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium.