On the mechanics of cold die compaction for powder metallurgy

Abstract The main object of this paper is to present a theoretical model for the cold die compaction of powder materials based on the axisymmetric solution of large deformation. The model produces an expression relating the green density of the compact to the applied pressure. The analysis takes into account the internal (restricted movements) coefficient of friction between the particles and the container-compacted powder interface friction. Also, a modified analytical expression for the yield compression stress based on the internal coefficient of friction and the work-hardening of the powder was introduced in the analysis. Experiments were performed on cold die compaction of powder of different particles, having sizes between 45 and 150 μm. Comparison between experimental and theoretical results demonstrated remarkable agreement for all the tested conditions. In addition, and for the purpose of verification of the present theory, other published experimental values were also compared and found to be in very good correlation with the predicted results. Other relevant parameters will also be discussed.

[1]  W. Jones,et al.  Fundamental principles of powder metallurgy , 1960 .

[2]  R. Davies,et al.  The Production of Components by Forging of Powder Preforms , 1973 .

[3]  I. Hutchings,et al.  Effect of compaction pressure and powder grade on microstructure and hardness of steam oxidised sintered iron , 2001 .

[4]  H. Fischmeister.  Powder Compaction: Fundamentals and Recent Developments , 1982 .

[5]  R. Oberacker,et al.  An introduction to powder metallurgy , 1993 .

[6]  Hazim Ali Al-Qureshi,et al.  Constitutive model for the elastic–plastic analysis of porous sintered materials , 2004 .

[7]  S. Li,et al.  New compaction equation for powder materials , 1994 .

[8]  R. J. Green,et al.  A plasticity theory for porous solids , 1972 .

[9]  S. M. Doraivelu,et al.  A new yield function for compressible PM materials , 1984 .

[10]  Henry Herman Hausner,et al.  Handbook of Powder Metallurgy , 1973 .

[11]  O. Coube,et al.  Numerical simulation of metal powder die compaction with special consideration of cracking , 2000 .

[12]  F. Lenel,et al.  Powder Metallurgy: Principles and Applications , 1980 .

[13]  Randall M. German,et al.  Powder Metallurgy of Iron and Steel , 1998 .

[14]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[15]  Ahmad Kamal Ariffin Mohd Ihsan,et al.  Investigation of powder compaction processes , 1994 .

[16]  Hazim Ali Al-Qureshi,et al.  Analysis and investigation of ballistic impact on ceramic/metal composite armour , 2004 .