Hardening of an ODS Ferritic Steel after Helium Implantation and Thermal Annealing

Specimens of an oxide dispersion strengthened (ODS) ferritic steel (15Cr-4Al-0.6Zr-0.1Ti) are implanted with multiple-energy He ions at room temperature to create a damage plateau of 0.4 dpa for the average (corresponding to an He concentration of about 7000 appm) from the near surface to a depth about 1 μm. The specimen is subsequently thermally annealed at 800°C for 1 h in a vacuum so that simple defects can be formed in the as-implanted state that has undergone significant recombination, meanwhile helium bubbles at nano-scale are formed. Hardness of the specimens are tested with the nano-indentation technique. A hardening by 25% is observed. Microstructures of the specimen after irradiation/annealing are investigated with transmission electron microscopy. Helium bubbles are generally located at dislocations and grain boundaries. Using the dispersed barrier strength model, the strength factor of helium bubbles in the ODS ferritic steel is estimated to be between 0.1 and 0.26, which is close to that of helium bubbles in austenitic steels.

[1]  K. Yano,et al.  TEM in situ micropillar compression tests of ion irradiated oxide dispersion strengthened alloy , 2017 .

[2]  A. Hasegawa,et al.  The effect of voids on the hardening of body-centered cubic Fe , 2016 .

[3]  Q. Zhan,et al.  Helium and hydrogen irradiation induced hardening in CLAM steel , 2015 .

[4]  Adrian Barbu,et al.  Chromium enrichment on the habit plane of dislocation loops in ion-irradiated high-purity Fe–Cr alloys , 2014 .

[5]  A. Kimura,et al.  Irradiation hardening of ODS ferritic steels under helium implantation and heavy-ion irradiation , 2014 .

[6]  A. Hasegawa,et al.  Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation , 2014 .

[7]  M. Döbeli,et al.  Helium ion irradiation induced swelling and hardening in commercial and experimental ODS steels , 2014 .

[8]  T. Fujisawa,et al.  TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened steel with Zr addition , 2014 .

[9]  A. Minor,et al.  Application of small-scale testing for investigation of ion-beam-irradiated materials , 2012 .

[10]  Ryuta Kasada,et al.  A new approach to evaluate irradiation hardening of ion-irradiated ferritic alloys by nano-indentation techniques , 2011 .

[11]  A. Kimura,et al.  Neutron irradiation hardening and microstructure changes in Fe–Mn binary alloys , 2011 .

[12]  G. Pharr,et al.  The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations , 2010 .

[13]  Y. Zhang,et al.  Study on nanohardness of helium-implanted 4H-SiC , 2010 .

[14]  X. Zu,et al.  Dynamic interactions of helium-vacancy clusters with edge dislocations in α-Fe , 2010 .

[15]  S. Zinkle,et al.  Structural materials for fission & fusion energy , 2009 .

[16]  Yuzhen Yang,et al.  Void swelling in MA956 ODS steel irradiated with 122 MeV Ne-ions at elevated temperatures , 2009 .

[17]  F. Carré,et al.  Structural materials challenges for advanced reactor systems , 2009 .

[18]  David B. Williams,et al.  Obtaining CBED Patterns , 2009 .

[19]  Gary S. Was,et al.  The relationship between hardness and yield stress in irradiated austenitic and ferritic steels , 2005 .

[20]  H. Mori,et al.  Effects of chromium on the one-dimensional motion of interstitial-type dislocation loops in iron , 2004 .

[21]  Steven J. Zinkle,et al.  Materials needs for fusion, Generation IV fission reactors and spallation neutron sources – similarities and differences , 2004 .

[22]  B. Bhushan,et al.  A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications , 2002 .

[23]  R. Klueh,et al.  Development of an Oxide Dispersion Strengthened Reduced-Activation Steel for Fusion Energy , 2000 .

[24]  A. Hishinuma,et al.  Damage Structures and Mechanical Properties of High-Purity Fe-9Cr Alloys Irradiated by Neutrons , 2000 .

[25]  A. Hishinuma,et al.  Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation , 2000 .

[26]  Naoyuki Hashimoto,et al.  Defect and void evolution in oxide dispersion strengthened ferritic steels under 3.2 MeV Fe+ ion irradiation with simultaneous helium injection , 2000 .

[27]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[28]  A. Serra,et al.  Aspects of microstructure evolution under cascade damage conditions , 1997 .

[29]  T. Okuda,et al.  Development of Oxide Dispersion Strengthened Ferritic Steels for FBR Core Application, (I). Improvement of Mechanical Properties by Recrystallization Processing.:Improvement of Mechanical Properties by Recrystallization Processing , 1997 .

[30]  G. E. Lucas,et al.  The evolution of mechanical property change in irradiated austenitic stainless steels , 1993 .

[31]  B. N. Singh,et al.  An analysis of the bubble formation behaviour under different experimental conditions , 1992 .

[32]  S. M. Murphy,et al.  The nucleation and growth of gas bubbles in irradiated metals , 1990 .

[33]  G. Odette,et al.  Development of mechanical property correlation methodology for fusion environments , 1979 .