Fabrication of multimode polymeric waveguides and micromirrors using deep X-ray lithography
暂无分享,去创建一个
[1] L. Eldada,et al. Advances in polymer integrated optics , 2000, IEEE Journal of Selected Topics in Quantum Electronics.
[3] W. White,et al. High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m) , 2000, IEEE Photonics Technology Letters.
[4] Chantal Khan Malek,et al. Evaluation of alternative development process for high-aspect-ratio poly(methylmethacrylate) microstructures in deep x-ray lithography , 2000 .
[5] Saburo Imamura,et al. LOW-LOSS POLYMERIC OPTICAL WAVEGUIDES WITH 45 MIRRORS , 1998 .
[6] T. Sakamoto,et al. Optical interconnection using VCSELs and polymeric waveguide circuits , 2000, Journal of Lightwave Technology.
[7] Richard M. Osgood,et al. Optoelectronic backplane interconnect technology development (POINT) , 1997, Photonics West.
[8] Jae-Wook Kang,et al. Low-loss fluorinated poly(arylene ether sulfide) waveguides with high thermal stability , 2001 .
[9] Andreas Neyer,et al. Integration of polymer optical waveguides into printed circuit boards , 2000 .
[10] Edgar Voges,et al. Multimode polymeric waveguide devices fabricated by two-component injection moulding , 1997 .
[11] W. Ehrfeld,et al. Recent developments in deep x-ray lithography , 1998 .
[12] Suning Tang,et al. Board-level optical clock signal distribution using Si CMOS-compatible polyimide-based 1- to 48-fanout H-tree , 1998, Other Conferences.
[13] Xuliang Han,et al. An 8-Gb/s optical backplane bus based on microchannel interconnects: design, fabrication, and performance measurements , 2000, Journal of Lightwave Technology.