Improved impact toughness of laminate heterogeneous AZ31/GW103K alloys by interface delamination

[1]  Hong Wang,et al.  High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy , 2022, Materials Research Letters.

[2]  Yufeng Sun,et al.  Effect of the Testing Temperature on the Impact Property of a Multilayered Soft–Hard Copper–Brass Block , 2022, Coatings.

[3]  B. Xiao,et al.  Enhanced strength–ductility synergy of carbon nanotube/Al–Cu–Mg composites via introducing laminate structure and grain modification , 2022, Composites Part B: Engineering.

[4]  H. Zhou,et al.  Ductilization of a diffusion-bonded heterostructured AZ31/GW103K/AZ31 alloy by interfacial reinforcement , 2022, Materials Science and Engineering: A.

[5]  F. Pan,et al.  Mechanical properties and deformation mechanism in Mg-Gd alloy laminate with dual-heterostructure grain size and texture , 2022, International Journal of Plasticity.

[6]  H. Roven,et al.  Microstructure and mechanical properties of the AZ31/GW103K bimetal composite rods fabricated by co-extrusion , 2022, Materials Science and Engineering: A.

[7]  Xiaolei Wu,et al.  Heterostructured Materials , 2021, Progress in Materials Science.

[8]  Yonghao Zhao,et al.  Achieving ultra-strong Magnesium–lithium alloys by low-strain rotary swaging , 2021 .

[9]  Jie Xu,et al.  Sustainable fabrication of Cu/Nb composites with continuous laminated structure to achieve ultrahigh strength and excellent electrical conductivity , 2021 .

[10]  Xiaolei Wu,et al.  Gradient and lamellar heterostructures for superior mechanical properties , 2021, MRS Bulletin.

[11]  Yang Cao,et al.  Grain size effect on tensile properties and slip systems of pure magnesium , 2021 .

[12]  Xiaolei Wu,et al.  Heterogeneous materials: a new class of materials with unprecedented mechanical properties , 2017, Heterostructured Materials.

[13]  C. Boehlert,et al.  Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets , 2021 .

[14]  M. Gupta,et al.  Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles , 2020, Composites Part B: Engineering.

[15]  Huajian Gao,et al.  Heterostructured materials: superior properties from hetero-zone interaction , 2020, Materials Research Letters.

[16]  Xuefei Chen,et al.  High strength-ductility of heterogeneous sandwich Mg–Y alloys produced by high pressure torsion , 2020 .

[17]  Wei Liu,et al.  Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults , 2020 .

[18]  Xuefei Chen,et al.  Atomic-scale three-dimensional structural characterisation of twin interface in Mg alloys , 2020 .

[19]  R. Ritchie,et al.  Making ultrastrong steel tough by grain-boundary delamination , 2020, Science.

[20]  Yuyao Chen,et al.  Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+TiC)p/6063 composites prepared by accumulative roll bonding , 2020 .

[21]  N. Hansen,et al.  Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd , 2020 .

[22]  Ding-shun She,et al.  Superior impact property and fracture mechanism of a multilayered copper/bronze laminate , 2019, Materials Letters.

[23]  K. Hamad,et al.  On the ductility of magnesium based materials: A mini review , 2019, Journal of Alloys and Compounds.

[24]  Xiaolei Wu,et al.  Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.

[25]  Yusheng Li,et al.  Soft/hard copper/bronze laminates with superior mechanical properties , 2019, Materials Science and Engineering: A.

[26]  Xiaolei Wu,et al.  In-situ observation of dislocation dynamics near heterostructured interfaces , 2019, Materials Research Letters.

[27]  D. Raabe,et al.  Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase. , 2019, Physical review letters.

[28]  Qudong Wang,et al.  The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy , 2019, Acta Materialia.

[29]  Hyung Keun Park,et al.  Additional hardening in harmonic structured materials by strain partitioning and back stress , 2018 .

[30]  S. Ringer,et al.  On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys , 2018 .

[31]  J. Narayan,et al.  Mechanical properties of copper/bronze laminates: Role of interfaces , 2016 .

[32]  F. Yuan,et al.  Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility , 2015, Proceedings of the National Academy of Sciences.

[33]  J. Schoenung,et al.  TEM study on relationship between stacking faults and non-basal dislocations in Mg , 2015 .

[34]  Hao Zhou,et al.  Effect of Ag on interfacial segregation in Mg–Gd–Y–(Ag)–Zr alloy , 2015 .

[35]  A. Asgari,et al.  Strain partitioning in dual-phase steels containing tempered martensite , 2014 .

[36]  J. El-Awady,et al.  Formation and slip of pyramidal dislocations in hexagonal close-packed magnesium single crystals , 2014 .

[37]  C. Cepeda-Jiménez,et al.  Influence of interfacial defects on the impact toughness of solid state diffusion bonded Ti–6Al–4V alloy based multilayer composites , 2013 .

[38]  D. Raabe,et al.  The relation between ductility and stacking fault energies in Mg and Mg–Y alloys , 2012 .

[39]  M. Barnett,et al.  Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals , 2010 .

[40]  M. Calcagnotto,et al.  Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD , 2010 .

[41]  P. Yan,et al.  Transmission electron microscopy study of stacking faults and their interaction with pyramidal dislocations in deformed Mg , 2010 .

[42]  C. Cepeda-Jiménez,et al.  Influence of the alumina thickness at the interfaces on the fracture mechanisms of aluminium multilayer composites , 2008 .

[43]  C. Cepeda-Jiménez,et al.  Interface Effects on the Fracture Mechanism of a High-Toughness Aluminum-Composite Laminate , 2008 .

[44]  M. Pozuelo,et al.  Delamination effect on the impact toughness of an ultrahigh carbon-mild steel laminate composite , 2006 .

[45]  A. Mortensen,et al.  Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues , 2003 .

[46]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[47]  S. Mahajan,et al.  Accommodation and formation of {112̄1} twins in Co single crystals , 1980 .